Find an experienced cabinet installer in Inner South Melbourne

Two cabinet locks to be installed - Opened to recommendations on what would be appropriate.

Looking for an experienced handyman to help me do the below, so my cabinet and laundry bench top are flush against the wall. Scope includes: - Remove approx. 2 metres of skirting board from concrete wall - Wall mount the top of tall cabinet to a concrete wall. Bracket provided as per photo but please advise if not supportive enough for wall. - help me move side by side laundry with benchtop and cabinet back into position so it’s flush against the wall. You must bring tools suitable for drilling into concrete and appropriate wall plugs if needed for mounting. Timing is flexible but prefer sooner rather than later.

Removal of existing mirror (no cabinet) and install cabinet mirror

We need a qualified tradie/carpenter to please help us drill screws in double brick walls and help put up a cabinet on the wall(as seen in the photos) and the curtain rod brackets. Just the brackets is fine. We will install the rods ourselves. We need 4 screws drilled for the cabinet and about 8 screws drilled for the 2 curtain rods, one in the bedroom and one in the living room. We can provide the drilling bits if needed but we would like someone to come with their own hammer drill and equipments like the ladders and anything suitable to drill smoothly through a double brick wall. It should be a fairly easy job for someone experienced. Thank you and we look forward to hearing from you.

I need two new bathroom mirror cabinets recessed into an existing wall in my bathroom. The cabinets are 917 x 203 x 865 mm. The bathroom wall is 1785 mm (w) x 2365 mm (h). We will remove the existing cabinet & towel rails. The new mirror cabinets fit side by side on the top section of the wall.

I have a small, slimline shoe cabinet that needs to be wall mounted into plasterboard. Wouldn’t take more than 10 mins for an experienced handyman.

I have a kitchen cabinet which needs to be removed from the wall and the new Kaboodle kitchen cabinet installed. The photos shows the cabinet currently there. A similar one with a door has been ordered which I need installed.

We have 1 hard wired mirror that needs to be uninstalled/disconnected, and replaced with a shaving cabinet that has hard wired lights in it

Install of 2 door laundry cabinet on wall

We require 2 keyed cabinet locks to be installed on cupboard doors Must be professional, clean and efficient as we are a medical clinic. Required today.

Complete install of a flat pack kitchen - cabinets built with doors and drawers on. Cabinet and bench top install

3 x mirrored bathroom cabinets (3 door) to be fixed to existing tiled walls in separate bathrooms - Due date: Flexible

Install kitchen and bathroom cabinets - Due date: Needs to be done on Wednesday, 29 November 2023

We need to install draws to store cigarettes around 5 - Due date: Needs to be done on Monday, 21 August 2023

Install cabinet doors above rangehood in the kitchen. - Due date: Flexible

QUOTE NEEDED I require an experienced cabinet maker available to finish installing cabinetry on a residential project in Bentleigh. 2 x side by side houses - Kitchen - Study - Bathroom - Living Cabinetry will be on site. - Due date: Needs to be done on Monday, 26 June 2023

Installation of a Bunnings supplied kitchen design, including cabinetry - Due date: Before Sunday, 30 April 2023

Install ikea or Kaboodle kitchen. 9 cabinets, plus 2 open shelves laminate benchtop, will require you to do 1xcutout for gas cooktop 600mm, 1xsink&tap. Work is install, but please also quote demolition separately (ie. safely take old cabinets&splashback off wall). Property in Hampton 3188 Work is suitable for someone who's familiar & experience with kitchen cabinet assembly, installation & mounting to wall. Ideally, you work or retired but have worked in the industry doing similiar work. A referral from your workplace will be highly regarded. Carpenter qualification referred but not essential if you have the experience & referral. A retired carpenter/cabinet maker (who's worked in cabinet manufacturing & installation industry for 30+yrs) will be there to give you a helping hand. An engineer will be there to double check: floor level (lowest/highest point of the floor has been found and is accurate), Cabinets angles are 90degC, wall studs are identified with the right tool and are used to fix cabinets for re-enforcement wherever possible, all drawers line up, install&safety requirements are met for gas cooktop & oven (ie.minimum distance are allowed between oven to the next cabinet, minimum distance for cabinets to wall for door opening), appropriate wall fixings & wood screws are used for fixation to stud or plasterboard...etc Tools & Materials you supply: Drawer runners and hinges will be supplied, however you will need the following tools as a minimum. 1. Clamps - ensure you have clamps that won’t mark exposed surfaces (clamps with plastic to protect the surface). 2. Adjustable square. 5. 65mm wood screws. 6. Spirit Level - 900mm. 7. Wall fixings 8. Cordless drill - with number 2 screw tip, 4mm drill bit, number 12 countersinking drill bit. All steps will be done to meet industry standard, or you may be asked to stop working at anytime and no payment will be made. So please do take this into consideration before you make an offer. - Due date: Flexible

Need help from an experienced cabinet maker installing cabinet doors and drawer fronts and various other installation jobs. - Due date: Needs to be done on Friday, 9 December 2022

We need the following mounted to wall in house: - 7 different pieces (1 art piece is 8 small separate pieces) - 1 mirror and - 2 childrens book cases