Find affordable builders in Sydney

We need someone to install pergola bought from bunnings. Photo is attached. The floor is grass (not wood or concrete).

Partition between two offices: Required: Supply and installation of plasterboard walls as per floor plan, 64mm steel frame, 13mm plasterboard to each side, MSB insulation, set and sand ready for painting, aluminium skirting and trim. Measurement: Length - 5 meter Height - 2.6 meter - Due date: Before Monday, 29th Nov 2021

Restain pergola Let down by contractor - Due date: Flexible

Need Pergola re oiled If required will supply oil . - Due date: Flexible

We want to remove a window and replace it with a door (we don't have one, and are open to you supplying one in Black Alumimium - please quote if so). Once this door is installed we need to open an existing opening to the same height and slightly wider in the brick work - I imagine this will involve inserting some sort of beam / support above the door

I need a qualified builder/engineer who can come and inspect my house. My house is a brick veneer freestanding house. Over the past few years I’ve noticed cracks forming in the ceiling gyprock and some places in the walls. Over time this has become worse where a 3m length of cornice has fallen down and more coming loose. 
I am hoping to get a quote on how much to make repairs and also fix the issue which is causing - Due date: Flexible

Project in the inner west. Using Revit, Model up existing dwelling to scale and in detail, including walls, floors, doors, windows , site, topography, roof and neighbouring dwellings.

Look for handyman to drill polycarbonate sheet s up on pergola, and make sure no water leaks if rains. 4x4m pergola sheets provided

There are a few branches that need to be chopped with a chain saw . Bush needs to be chopped removed & put in green bin

I need a bunnings mimosa gazebo installed measurements 3x3m, installation instruction requires 3 people to install - Due date: Flexible

Demolition of bathroom with a team

I have an Easy Shed which needs assembling. The shed is 212cmx225x151. It needs to be anchored into the concrete floor. You will need a cordless drill that can drill into concrete.

Facia on side of house, pergola post and 3 timbers from pergola replaced, 4 wooden windows possibly more as I cannot open windows and some window frames replaced.

Need a carpenter to help me install a freestanding timber pergola next Monday & Tuesday. Needs to be a professional & have own tools! Size of pergola will need to be - 4850mm by 4500mm

Need a gyprock builder to come and complete a small partition wall. Small, quick job. - Due date: Needs to be done on Monday, 6th Dec 2021

Demolish Bathroom, Kitchen and Flooring to Terrace building. Studio is on ground floor with 4 steps to footpath and is located closest (approx. 3m to main entrance door/footpath) The job is to perform the following to a small studio apartment. - Remove all tiles and adhesive from walls - Remove Bathroom Basin/Sink - Remove Toilet - Demolish Kitchen Cabinets - Remove laminate flooring - Disposal of all waste (excluding rangehood, cooktop/oven, hot water tank, refrigerator) Photos have been attached showing kitchen and bath area. Approximate dimensions as follows: Bathroom Flooring 925mm x 3300mm Shower area tile height 2000mm Kitchen length 2590mm Kitchen depth 600mm Flooring area excluding Bathroom: 20.8m2 - Due date: Flexible

- 10m long , 300mm high wall with a few footings for a garden bed. - Material will be provided, quote is for the work only. stacked concrete blocks is probably what we'll be going for. - This task is for the quote only; we can determine a price after you've measured up the location.

We need holes drilled and some office decorations affixed to the wall. This includes 2 x TV's, 2 x Mirrors, some white boards & photo frames Minimum call out is $300 but I am open to day rates in the case that it takes the whole day. We can hang pictures but will need the holes drilled - Due date: Before Saturday, 23rd Oct 2021

Small pergola for outside bath. Can be attacked to both back and side walls. 170x 210 x 220

We need an AbscoShed assembled. It’s called a Absco Eco-nomy Skillion Roof 1.52m x 0.78m Single Door Zinc Shed. Items required to assemble: 3MM drill bit. Power drill Rivet Gun Phillips head screw driver Glasses and gloves. It’s for inside a car park at an apartment complex.