What is Airtasker?

Post your task

Post your task

Tell us what you need, it's FREE to post.

Review offers

Review offers

Get offers from trusted Taskers and view profiles.

Get it done

Get it done

Choose the right person for your task and get it done.

Recent Building & Construction tasks in Surry Hills

avatar-url

Taking tiles of wall and floor

Surry Hills NSW, Australia
5 Mar 2019
$250

Taking tiles off wall and floor and dispose of Without any damage to floor joists and wall

avatar-url

Raise my roof, install lintels, build walls

Surry Hills NSW 2010, Australia
16 Feb 2019
$7,500

Will pay for all materials. Looking for an experienced and licenced trade to assist with the following: - removal of single brick, load bearing wall measuring 3.8m long, 3m high. This wall has a large opening of 1.5m long X 2.5m wide. Install 4.5m steel beam to support wall above. This is to be inserted into party wall. Structural engineer drawings available. - removal of single brick, NON load bearing wall measuring 3.9m long, 3m high. Structural engineer drawings available. - removal of 800mm x 3m part of double brick, load bearing wall. Install a 2m timber beam in attic to support roof line. Structural engineer drawings available. - removal of 2.3m x 2.5m single brick, non structural wall. Replace with a timber framed, gyprock, braced wall with a 870mm standard door opening. Total wall span is 2.3m x 2.5m. Structural engineer drawings available. - removal of 1.5m x 2.5m, non structural gyprock wall. Replace with a 1.5m x 2.5m long, non structural gyprock wall with a 750mm pocket door. Structural engineer drawings available. - build and gyprock a 600mm x 2.5m wall (non structural, wall for laundry) - build and gyprock a 500mm x 3m wall (non structural, wall for linen closet) - build and gyprock a 3.9m x 3m wall (non structural, living area) - build (no gyprock, just frame) a 1300mm x 2.5m wall (bathroom, non structural) - build (no gyprock, just frame) a 2300 x 2.5m wall (bathroom, non structural) - build (no gyprock, just frame) a 800mm x 2.5m wall (ensuite, non structural) - build (no gyprock, just frame) a 3m x 2.5m wall (kitchen, non structural) - raise roof pitch of our rear, second level extension. Currently 45 degree angle, and we want to bring up to 10 degrees. Brick construction. Timber frame trusses. Area measures 2.3m x 5.1m. Replace metal roofing and guttering to this area. Replace rest of our metal roof with new colourbond roof (additional 50 sqm). Render additional part of wall externally, and gyprock entire internal wall (measuring 5m x 2.4m) to ensure even finish). Structural engineer drawings available. - install attic ladder into ceiling of master bedroom. Lay down MDF floor measuring 4.5m x 8m. Sheet up walls and ceiling. Walls are brick construction. Insulation installed for both floors and ceiling. Nothing required for walls. Things you should know... - We have a structural engineers report that covers removal of walls and raising roof line of the extension. This must be followed. - You must be licensed to carry out the work. - You source, but we will PAY for all building materials. Your offer must include your labour, Airtasker fees as well as any rubbish removal costs. - All new walls are not to have skirting, architraves or cornices installed. We will complete this at a later date after new flooring has been laid. Strip out of entire property to occur next week. - Access is good. Our carport is 5m wide and backs onto a junction of two quiet streets. The building is a 3 bedroom, two storey terrace home. - Ideally we would like to start Wednesday week.

avatar-url

Dent Removal

Surry Hills NSW, Australia
11 Jan 2019
$200

I have a singular hail storm dent in the roof of my car and require it to be repaired by paintless dent removal.

avatar-url

Provide advice on whether rendering can be fixed

Surry Hills NSW 2010, Australia
2 Dec 2018
$50

Recently had my kitchen renovated and the kitchen company did a poor job rendering a small column and rendering the chasing in the ceiling. Am wondering if it can be fixed, or if I should just paint over it.

Ian arrived promptly and gave me good, honest advice. Exactly what I wanted! Thanks.
avatar-url

Cement render skim a column and fill two holes

Surry Hills NSW 2010, Australia
18 Oct 2018
$250

For a kitchen renovation I need a small column skimmed on one side so the column looks flush against the kitchen cabinets. Also need two holes filled where power points have been moved. Unfortunately I need this job done soon. It's important that you have good experience.

avatar-url

Carpentry and building

Surry Hills NSW, Australia
5 Oct 2018
$1,750

Build a wooden stud wall with door so as to make my car space usable for storage. I own a restaurant bar and need to build a raised platform with sides as a dj booth. I also need a cupboard built to house electrical and music Equipment. I need an area built with cupboards for the waiter station and cash register.

avatar-url

Build internal laundry ceiling

Surry Hills NSW 2010, Australia
12 Jun 2017
$300

1.4m x 2.7 gyprock ceiling required in small laundry at back of terrace. Wood framing already installed, gyprock ceiling required. Final measurement required.

Michael was committed, experienced and professional. He did a great job putting in my new ceiling and did a couple of extra jobs for no extra cost. Thank you
avatar-url

Remove render from 2.5 walls

Surry Hills NSW 2010, Australia
21 May 2017
$400

Use chisel and or percussion hammer to remove render from these 2 walls and a chimney stack, plus clean up, carry the rubble down stairs, sweep and vacuum..

Malcolm is a hard working resourceful guy! Thx mate!!
avatar-url

Cut and instal a marble front door step

Surry Hills, New South Wales, Australia
2 May 2017
$100

We have a marble slab (step) which needs to be cut in length and installed under our front door on top of existing sandstone block. There are some tiles on top of the sandstone block which need to be chipped off. The doorway (the steel security gate) measures 860 wide but the sandstone block underneath measures about 100 wide. The marble slab measures 925 x 75.x 30

avatar-url

I need my concrete floor to be smooth

Surry Hills NSW 2010, Australia
27 Mar 2017
$130

Tools you will need will be grinder eyewear ear wear mouth mask There is a small patch where the concrete has a curve and it's where I'm placing a cabinet so I need it to be smooth

avatar-url

IKEA kitchen installation

Surry Hills NSW, Australia
20 Feb 2019
$500

Old kitchen needs removing and new kitchen needs installing

avatar-url

I need building & construction services

Surry Hills NSW 2010, Australia
9 Feb 2019
$500

I want to install 4.8m wide aluminium sliding doors on my balcony. It's a terrace house and I have disassembled the frame. 2 sliding doors and 2 glass side panels each 1.2m w need to be carried up stairs to the first floor, then the frame reassembled in place. It will take 2 strong men and myself from a half to full day.

avatar-url

Repair hail stone damage on 2nd floor balcony

Surry Hills NSW 2010, Australia
5 Jan 2019
$400

Roughly 3.5m x 1.5m polycarbonate sheets to be replaced - our balcony cover was ruined in the hail storm.

avatar-url

Small Jack Hammer Job

Surry Hills NSW, Australia
28 Oct 2018
$200

Need someone to jack hammer a concrete lid that’s used for our grease trap. The lid no longer can open and we need to now jack hammer it to open it. It’s concrete, 10cm thick approx, 70cm x 70cm. Need this job done urgently.

Excellent and quick work
avatar-url

Rendering walls of a kitchenette

Surry Hills NSW, Australia
9 Oct 2018
$250

Small studio kitchenette requires new render. 3 x walls under 1.5m 1 x wall under 1m Job includes all labour equipment and materials.

avatar-url

Removing two large (rusty) bolts.

Surry Hills NSW 2010, Australia
1 Aug 2017
$50

I have a metal bin outside that has two large rusty concrete screws holding it in place and I would like it removed. I am guessing it would need to be ground off but I am no expert.

avatar-url

Hang a wooden beam from our concrete ceiling

Surry Hills, New South Wales, Australia
23 May 2017
$150

We want to get someone to source and hang a wooden beam from our ceiling so we can hang pot plants from it. Here are the specs: Ceiling is concrete Beam needs to be supplied - we prefer wood (cost is including beam) Any tools need to be supplied Beam length approx 3 meters

avatar-url

Office equipment disposal 2 (Tim)

Surry Hills NSW 2010, Australia
10 May 2017
$20

This posting is a budget increase for an existing task - please do not submit new bids for this task.

avatar-url

Install kitchen splashback and rangehood

Surry Hills NSW 2010, Australia
14 Apr 2017
$150

Handyman needed to install: - 1pc stainless steel kitchen splashback that needs to be installed with heat-proof silicon (tasker to provide silicon) - remove old rangehood and install new rangehood. this should be a straight swap as they are the same size. - drill in IKEA Grundtal rail to the top part of the splashback

avatar-url

Putty up small holes in a concrete render wall

Surry Hills, New South Wales, Australia
26 Mar 2017
$30

I need someone to putty up some small holes (under 5cm diameter) in a concrete render wall. One putty up please give a quick paint job (might not be needed if the putty colour matches the wall).

Tony was good to deal with and professional. It will take a few days to see the final results of his work but happy with it to date.
avatar-url

Taking tiles of wall and floor

Surry Hills NSW, Australia
5 Mar 2019
$250

Taking tiles off wall and floor and dispose of Without any damage to floor joists and wall

avatar-url

IKEA kitchen installation

Surry Hills NSW, Australia
20 Feb 2019
$500

Old kitchen needs removing and new kitchen needs installing

avatar-url

Raise my roof, install lintels, build walls

Surry Hills NSW 2010, Australia
16 Feb 2019
$7,500

Will pay for all materials. Looking for an experienced and licenced trade to assist with the following: - removal of single brick, load bearing wall measuring 3.8m long, 3m high. This wall has a large opening of 1.5m long X 2.5m wide. Install 4.5m steel beam to support wall above. This is to be inserted into party wall. Structural engineer drawings available. - removal of single brick, NON load bearing wall measuring 3.9m long, 3m high. Structural engineer drawings available. - removal of 800mm x 3m part of double brick, load bearing wall. Install a 2m timber beam in attic to support roof line. Structural engineer drawings available. - removal of 2.3m x 2.5m single brick, non structural wall. Replace with a timber framed, gyprock, braced wall with a 870mm standard door opening. Total wall span is 2.3m x 2.5m. Structural engineer drawings available. - removal of 1.5m x 2.5m, non structural gyprock wall. Replace with a 1.5m x 2.5m long, non structural gyprock wall with a 750mm pocket door. Structural engineer drawings available. - build and gyprock a 600mm x 2.5m wall (non structural, wall for laundry) - build and gyprock a 500mm x 3m wall (non structural, wall for linen closet) - build and gyprock a 3.9m x 3m wall (non structural, living area) - build (no gyprock, just frame) a 1300mm x 2.5m wall (bathroom, non structural) - build (no gyprock, just frame) a 2300 x 2.5m wall (bathroom, non structural) - build (no gyprock, just frame) a 800mm x 2.5m wall (ensuite, non structural) - build (no gyprock, just frame) a 3m x 2.5m wall (kitchen, non structural) - raise roof pitch of our rear, second level extension. Currently 45 degree angle, and we want to bring up to 10 degrees. Brick construction. Timber frame trusses. Area measures 2.3m x 5.1m. Replace metal roofing and guttering to this area. Replace rest of our metal roof with new colourbond roof (additional 50 sqm). Render additional part of wall externally, and gyprock entire internal wall (measuring 5m x 2.4m) to ensure even finish). Structural engineer drawings available. - install attic ladder into ceiling of master bedroom. Lay down MDF floor measuring 4.5m x 8m. Sheet up walls and ceiling. Walls are brick construction. Insulation installed for both floors and ceiling. Nothing required for walls. Things you should know... - We have a structural engineers report that covers removal of walls and raising roof line of the extension. This must be followed. - You must be licensed to carry out the work. - You source, but we will PAY for all building materials. Your offer must include your labour, Airtasker fees as well as any rubbish removal costs. - All new walls are not to have skirting, architraves or cornices installed. We will complete this at a later date after new flooring has been laid. Strip out of entire property to occur next week. - Access is good. Our carport is 5m wide and backs onto a junction of two quiet streets. The building is a 3 bedroom, two storey terrace home. - Ideally we would like to start Wednesday week.

avatar-url

I need building & construction services

Surry Hills NSW 2010, Australia
9 Feb 2019
$500

I want to install 4.8m wide aluminium sliding doors on my balcony. It's a terrace house and I have disassembled the frame. 2 sliding doors and 2 glass side panels each 1.2m w need to be carried up stairs to the first floor, then the frame reassembled in place. It will take 2 strong men and myself from a half to full day.

avatar-url

Dent Removal

Surry Hills NSW, Australia
11 Jan 2019
$200

I have a singular hail storm dent in the roof of my car and require it to be repaired by paintless dent removal.

avatar-url

Repair hail stone damage on 2nd floor balcony

Surry Hills NSW 2010, Australia
5 Jan 2019
$400

Roughly 3.5m x 1.5m polycarbonate sheets to be replaced - our balcony cover was ruined in the hail storm.

avatar-url

Provide advice on whether rendering can be fixed

Surry Hills NSW 2010, Australia
2 Dec 2018
$50

Recently had my kitchen renovated and the kitchen company did a poor job rendering a small column and rendering the chasing in the ceiling. Am wondering if it can be fixed, or if I should just paint over it.

Ian arrived promptly and gave me good, honest advice. Exactly what I wanted! Thanks.
avatar-url

Small Jack Hammer Job

Surry Hills NSW, Australia
28 Oct 2018
$200

Need someone to jack hammer a concrete lid that’s used for our grease trap. The lid no longer can open and we need to now jack hammer it to open it. It’s concrete, 10cm thick approx, 70cm x 70cm. Need this job done urgently.

Excellent and quick work
avatar-url

Cement render skim a column and fill two holes

Surry Hills NSW 2010, Australia
18 Oct 2018
$250

For a kitchen renovation I need a small column skimmed on one side so the column looks flush against the kitchen cabinets. Also need two holes filled where power points have been moved. Unfortunately I need this job done soon. It's important that you have good experience.

avatar-url

Rendering walls of a kitchenette

Surry Hills NSW, Australia
9 Oct 2018
$250

Small studio kitchenette requires new render. 3 x walls under 1.5m 1 x wall under 1m Job includes all labour equipment and materials.

avatar-url

Carpentry and building

Surry Hills NSW, Australia
5 Oct 2018
$1,750

Build a wooden stud wall with door so as to make my car space usable for storage. I own a restaurant bar and need to build a raised platform with sides as a dj booth. I also need a cupboard built to house electrical and music Equipment. I need an area built with cupboards for the waiter station and cash register.

avatar-url

Removing two large (rusty) bolts.

Surry Hills NSW 2010, Australia
1 Aug 2017
$50

I have a metal bin outside that has two large rusty concrete screws holding it in place and I would like it removed. I am guessing it would need to be ground off but I am no expert.

avatar-url

Build internal laundry ceiling

Surry Hills NSW 2010, Australia
12 Jun 2017
$300

1.4m x 2.7 gyprock ceiling required in small laundry at back of terrace. Wood framing already installed, gyprock ceiling required. Final measurement required.

Michael was committed, experienced and professional. He did a great job putting in my new ceiling and did a couple of extra jobs for no extra cost. Thank you
avatar-url

Hang a wooden beam from our concrete ceiling

Surry Hills, New South Wales, Australia
23 May 2017
$150

We want to get someone to source and hang a wooden beam from our ceiling so we can hang pot plants from it. Here are the specs: Ceiling is concrete Beam needs to be supplied - we prefer wood (cost is including beam) Any tools need to be supplied Beam length approx 3 meters

avatar-url

Remove render from 2.5 walls

Surry Hills NSW 2010, Australia
21 May 2017
$400

Use chisel and or percussion hammer to remove render from these 2 walls and a chimney stack, plus clean up, carry the rubble down stairs, sweep and vacuum..

Malcolm is a hard working resourceful guy! Thx mate!!
avatar-url

Office equipment disposal 2 (Tim)

Surry Hills NSW 2010, Australia
10 May 2017
$20

This posting is a budget increase for an existing task - please do not submit new bids for this task.

avatar-url

Cut and instal a marble front door step

Surry Hills, New South Wales, Australia
2 May 2017
$100

We have a marble slab (step) which needs to be cut in length and installed under our front door on top of existing sandstone block. There are some tiles on top of the sandstone block which need to be chipped off. The doorway (the steel security gate) measures 860 wide but the sandstone block underneath measures about 100 wide. The marble slab measures 925 x 75.x 30

avatar-url

Install kitchen splashback and rangehood

Surry Hills NSW 2010, Australia
14 Apr 2017
$150

Handyman needed to install: - 1pc stainless steel kitchen splashback that needs to be installed with heat-proof silicon (tasker to provide silicon) - remove old rangehood and install new rangehood. this should be a straight swap as they are the same size. - drill in IKEA Grundtal rail to the top part of the splashback

avatar-url

I need my concrete floor to be smooth

Surry Hills NSW 2010, Australia
27 Mar 2017
$130

Tools you will need will be grinder eyewear ear wear mouth mask There is a small patch where the concrete has a curve and it's where I'm placing a cabinet so I need it to be smooth

avatar-url

Putty up small holes in a concrete render wall

Surry Hills, New South Wales, Australia
26 Mar 2017
$30

I need someone to putty up some small holes (under 5cm diameter) in a concrete render wall. One putty up please give a quick paint job (might not be needed if the putty colour matches the wall).

Tony was good to deal with and professional. It will take a few days to see the final results of his work but happy with it to date.

Reviews for Building & Construction on Airtasker

Average 4.90
From 10 Reviews.
9
1
0
0
0

How much does Building & Construction cost?

The average cost of Building & Construction is between:$104 - $285on Airtasker

Low

104

Average

200

High

285

Why Airtasker?

Local, skilled pros

Take your pick of skilled Builders nearby.

Real reviews

Judge for yourself – every task gets a review.

Flexible pricing

Choose the offer that’s right for you.

Offers in no time

Start getting offers to do your task ASAP!

Become a Tasker

A Tasker is a person who can complete tasks for other people within the Airtasker community

Start earning

We've been independently reviewed by thousands...

4901 reviews

4901 reviews

on Product Review

Building & Construction Services
Building & Construction Services
something else…