Find skilled builders in South West Sydney

I’m looking for someone experienced to install a garden shed. * Concrete base is already prepared and ready * Concrete base size: 2.25X1.5 * Ideally, I would prefer someone who can supply and install the garden shed. * Alternatively, I can purchase/provide the shed materials and pay for installation only. * Please quote your price accordingly. Please note: The price shown above is for installation only. If you can supply and install the shed, please provide a separate quote including the cost of the shed.

Concrete driveway need to be finish

Lay concrete and install garden shed

assembly and EASYSHED 3 ×3 METRES IN MY BACK YARD

Assemble and bolt down a aluminium shed to a concrete slab. Brand -Easyshed Model ETT-D6030-ZA 6 x 3m workshop shed zinc 2.4m tall

Require samples and quotes in person to have either epoxy or tiles for pergola.

I have a pergola of approximately 45 m2, I need suggestions for either tiles or epoxy. Thanks

Need help with the demolition of duct work at Casula. from 7.20 to 3.50 grinder and drill skills. White cards and tools experience required. willing to help and follow the instructions.

Total indoor garage : 70sqm Drive way: 28sqm

2.5m height 5m length 3m width Cheap pergola at the front of my garage door

Have a existing pergola made of timber with existing damaged sheeting, need the sheeting replaced with suntuf sheeting and the existing sheeting taken away, area to be sheeted is 7m by 4m

I need help assembling and installing a motorised louvred pergola with attached wind-break blinds. This is a factory kit with full manufacturer diagrams (attached simplified summary available too). I’ll be on site to help as a third pair of hands, and the manufacturer can be contacted for technical support if needed. Scope: • Fix base plates with expansion bolts, erect and level 6 columns • Cut drainage outlets on relevant columns (per plan) • Fit outer frame, thread wiring through columns • Assemble louvred roof frame and install louvre blades (with LED connections where fitted) • Fit end covers, connect blades to drive shaft (left with slight play, not fully tightened) • Install push-rod actuator motor, manual override, and transformer • Assemble and install 3 roller shutter blind panels (2×3.4m + 1×2.5m), drill mounting holes, level to tolerance, connect zipper guide • Licensed electrician required on the job to terminate motor wiring (pergola + blinds) to mains/isolator per AS/NZS wiring rules and confirm RCM compliance • Pair remotes to motors, test operation What’s supplied: Full kit, motors, remotes, fixings, manufacturer diagrams, plain-English install summary, manufacturer support contact. What I need: • 2 people minimum, one of whom must hold an electrical licence (or bring a licensed sparky as part of your team) to complete the mains connection • Own tools (drill, 4mm/8mm bits, level, tape measure, wire pliers) • Comfortable with ladder work (~2.4–2.7m) Timeline: 2 full days, weather permitting

I have already started removing tiles, however, need someone to remove tiles and take with you. Not damage wall. - house is built before 1900’s Due date: Flexible

Hire carpenter to help me build the timber frame around existing patio as marked up on the pictures. Patio is 6mx3,5m. Inteding to build with H3 90x35, later on install cladding and outdoor blinds in the openings. For now only the frame. I can supply material, need only a labour and expertise for a day. Not in rush, some day in September

Install shed on my new concrete slab. Size: 4.5m x 2.25m x 2.05m I have all panels and parts but could potentially be missing a few nuts or bolts. Link to shed: https://3650449.app.netsuite.com/core/media/media.nl?id=2110420&c=3650449&h=PY0TKBGnpLGixXEFwP7-A8yEafXSndBWY9zgSjSPc241zlV_&_xt=.pdf

Looking for an experienced painter or handyman to fill minor cracks and apply driveway paint to a 20 square metre concrete driveway in Oran Park. What You Will Do - Crack Repair: Clean out any remaining debris from minor surface cracks, apply our flexible concrete crack filler, and scrape it flush with the surface. -Painting: Apply two uniform coats. Tools: Please bring all your own tools (rollers, brushes, extension poles, painter's tape, drop sheets, and crack scraping tools). We will provide the concrete paint and crack filler.

There is a hole appeared in one side of the driveway. Not sure how big it is inside, it looks about an inch from above. Need someone to assess and give me a quote to fix it.

I am moving house and need the pergola disassembled, transported to my new house that is less than 10 minutes away and reassembled. The pergola is not fixed to the ground. It is just sitting on the grass and it will be assembled on a slab at the new house. It does not need to be fixed to the slab. It just needs to be disassembled transported and reassembled. I am negotiable on the price

I'm looking experience someone who can assemble our shed in backyard Shed is packed & placed outside of the property. Clear concrete slap please see the picture. Shed dimensions are as follows 4.50 x 2.25 x 2.35 M Brand name Endura Condition New

Pergola at the rear has a leak. Size is ~2.8x4.1. Material: colorbond