Find skilled builders in Inner South West Sydney

Need to install a Yodolla pergola 6 by 3 m with post height extension. Time is flexible.

Install a flat-pack EasyShed onto an existing concrete slab. The installation is straightforward, and the existing shed will be removed beforehand. 3x2.25 cable roof Slab is leveled I'm happy to assist if 1 person is taking on this task

Put together an absco garden shed 3m length 1.5m depth On a timber deck NO need to anchor down

Install smart kit pergola 5x6 m

Easyshed assembly. Tall Flat Roof size 1.51m x 0.78m x 2.1m. Looking for someone experienced in shed assembly and may need 2 people according to manual. Needs to be anchored to concrete and i will supply anchor kit.

I need an experienced builder or handyman to help assemble a unbranded 3m x 3m freestanding pergola with an insulated sandwich-panel roof on an existing concrete slab. I'll be working alongside you as the second pair of hands, so only one worker is needed. Supplied: all kit parts (steel posts, beams, roof panels, brackets, fixings) You bring: a cold-cut or abrasive metal circular/drop saw, a hammer drill with masonry bits, and a level

I’m looking for an experienced and reliable person to completely dismantle and remove an existing 6m × 3m pergola. The job includes: * Safe dismantling of the entire pergola structure. * Removal and disposal of all materials and waste. * Leaving the area clean and tidy. Must bring all necessary tools, equipment and labour. Location: Yagoona, NSW Budget: $400 Please only make an offer if your price includes complete dismantling, waste removal and disposal.

Installation of Stratco garden Shed model HM1

We need an experienced tradesperson to extend the existing tin-roof parking shelter at our business premises and replace our rear entrance gate. 1. Extend the tin-roof parking shelter We want to extend the existing structure to create more covered parking for motorbikes and cars. Photo 1 shows the area we want covered. Photo 2 shows the existing tin-roof shelter. The extension needs a complete supporting framework, posts and corrugated metal roofing, matching the existing structure where practical. It must provide suitable height and clearance for cars and motorbikes, with proper rainwater drainage. 2. Replace the rear entrance gate Remove and replace the existing metal gate shown in Photo 3 with a durable, secure metal gate suitable for vehicle access. Include suitable hinges, locking hardware and any necessary post repairs or replacement. Please include in your offer: Supply of materials and installation. Separate costs for the shelter extension and gate replacement. Removal of the old gate and job-related rubbish. Any exclusions. Relevant experience, photos of similar jobs and availability. Measurements and the final design will need to be confirmed on site. MENTIONED BUDGET IS MAINLY LABOUR BUDGET. NEGOTIABLE

To purchase specified furniture and other items...put together the new furniture...remove the old furniture to storage or tip.

I need a 2.3 wide by 2.3 high wall Demolished. It's no structural and it's gyprock with metal frames. The electrical point will be disconnected. I don't need disposal

A panel on our outdoor patio/porch ceiling has sagged, creating a noticeable gap between the boards. Looking for an experienced carpenter or handyman to secure it back into position and ensure the surrounding structure is solid. Type of Ceiling: Timber-look / composite outdoor lining board (soffit). Issue: One section of the tongue-and-groove boards has dropped down/detached from the frame beneath. Requires: Re-align and fix the panel flush back into the ceiling framework. Provide necessary fixings (screws/brad nails/adhesive). Access: Outdoor patio area, easily accessible via standard step ladder (approx. 2.4m ceiling height). Tools Provided: None – please bring your own step ladder and tools

I need easyshed installed.. it’s a small one and according to the company straight forward to put together in a couple of hours. It needs to be bolted into cement, I have purchased the bolt and etc for that

Looking for experienced painter to do ceiling of pergola It’s been plastered and sanded. Please include paint to be supplied in your price There is also a pier or wall as per photo which is patched and sanded ready for paint. The last painter made a mess on walls and floors so looking for someone capable

Looking for an experienced handyman or roof installer to supply and fit polycarbonate/pergola roofing sheets over our existing open pergola frame. Job Details & Scope: Frame Dimensions: 3.9m wide x 3.0m deep x 2.87m high. Current Setup: Existing steel/metal open frame attached to the alfresco area. The top beams are currently flat. Core Requirements: - Supply and install quality clear or tinted polycarbonate roofing sheets (e.g., Laserlite or similar) - Build a slight pitch/angle onto the flat frame so water and debris can drain off effectively. - Supply and fit any necessary battens, timber/steel risers, flashings, fixings, and basic guttering/drainage setup required to keep the area waterproof.

We have what appears to be a blocked sewer line at the bottom of our driveway. Water/sewage is backing up from the drain/inspection point during use. Looking for a licensed plumber to: * Diagnose the blockage. * Clear the sewer line using appropriate equipment (drain snake/auger or jetter if required). * Test that the line is flowing correctly before leaving. * If possible, run a CCTV camera afterwards to identify the cause (please advise if this is an additional cost). Please bring all necessary equipment and include your availability. Photos attached.

I need a 3m x 3m shed assembled. Must have own tools. Past experience with these sheds preferred

Need these 2 driveway ramps drilled screwed into the ground. 4-6 screws each. So it stays put

Assemble ABSCO shed on a ready slab

Kitchen demolition rubbishes to take all away.