Find skilled builders in North West Perth

Pergola roof: Find and fix leaks in the tin roof over the pergola.

Looking for someone to clear the existing structures and old spa area in my backyard. Work required: Completely remove the green timber gazebo/pergola including the roof. Completely remove the adjoining brown timber pergola/structure, including posts and fixings. Timber does not need to be preserved or carefully dismantled — it can simply be cut into sections for faster removal. Cut back/remove the grapevine growing over the structure as required. Remove the small tiled/limestone surround around the old spa pit. Limestone blocks do not need to be kept and can be placed into the spa pit as part of the backfill. Spa pit is approximately 2.4m × 2.0m × 0.5m deep (around 2.4m³ before allowing for the limestone/rubble going back in). Supply sufficient clean fill/sand for the remaining space, fill the pit and compact it reasonably level with the surrounding area. Remove and dispose of all remaining unwanted timber, roofing, green waste and other debris. Access: Through the garage to the backyard. A ute/vehicle can access the garage, but materials will need to be carried or wheelbarrowed between the work area and garage. Budget is $1,300 all-inclusive of labour, fill material, disposal/tip fees and anything else required to complete the job. Please assess the photos and pit dimensions before making an offer — I don't want additional disposal or material charges added on the day. The timber/gazebo materials can be taken by the tasker if wanted.

The blind is 240 cms wide and 210cms when unrolled. It is new and still in the box. It needs to be attached to a cross beam of my pergola.

It’s already been partly put together , 3 sheets done and the doors , need it just to be completed

I have 4 pergola lights to be put back up but would rather a side mount as the exisiting location was allowing water to get into the lights, causing RCD to trip. I’m open to other suggestions on where to put them. I would like to receive an electrician certificate when the job is complete so please only licensed electricians apply. The wiring that already exists I already have a certificate for and was done this year.

Looking for someone experienced in automatic gate repairs. The motor arm has detached from the gate and is resting on the ground, as shown in the attached photos. The job involves inspecting the arm and mounting bracket, repairing or replacing any damaged fittings, securely reattaching the arm, and testing that the gate opens and closes correctly. Along with that, needs the motor serviced. Would get the motor service too, doing both tasks. Cost is only given as indicative. Please quote. Please refer to the photos.

2 x Stubbie Smartspan Roller Door Sheds erected onto concrete slab.

Looking for someone to demolish and remove a garden bed and outdoor fish tank. Total length is approximately 11.1m. Skip bin provided.

Dismantle: Carefully unbolt a 6m x 2.3m louvered pergola kit. Need all screws, brackets, and small hardware bagged and saved. Transport: Move all components (including main 6m header beams and louver blades) to Butler. Requirements: Must have a flatbed ute, long trailer, or roof racks capable of carrying 6-metre long beams safely without damage or scratching. Note: No installation required—just careful teardown, loading, and delivery.

Demolition work done and 1 full ute load and disposal fees and airtasker fee included 5 hrs work

Need 2 patio beams installed to a patio roof to hold fans Need 2 beams approximately 3 meters

Repair the corner of this column as per the picture. Will need to supply the materials to do the job. No need to paint, as I can do that when set.

Structural assessment and sign off for a pergola retrospective approval.

Install a 4X9 metres shed with patio measuring 2X9metres

Horizontal slates (about 4 or 5) to run from my pergola post to post to block out my neighbours lights

handyman to supply and install four aluminium poles and a small pergola-style roof (polycarbonate) about 3.5–4 m by 3.5. To be installed on existing timber floor structure, and no footings needed.

Shed installation 3x3x2.06. Everything is ready to go

Have a metal pergola that requires repainting.

Put a new pergola roof on (supply sheeting and flashing)

Looking for someone to assemble a Stratco Handi-Mate Sliding door shed (1.86m wide, 0.85m deep and 1.90m high). It also comes with a shed floor beam kit that needs to be fitted. It will sit on pavers and no need for anchoring. This will be behind the house in a corner. Area will be cleared prior to the assembly.