Find skilled builders in Ipswich

Assembly of EasyShed shed

Demolition of deck and surrounds. Removal of pizza oven weighing approximately 80kgs. Table/bench to stay. Access via stone steps.

Looking for a reliable and experienced concreter for a 110m² plain concrete for driveway. Please contact me if you’re interested.

I have an existing covered pergola/patio beside my house with a narrow open gap running between the pergola roof and the house. I would like the gap properly closed and made weatherproof to prevent rain coming through. Requirements: * Supply and install suitable flashing/infill * Make the full length of the gap weatherproof * Ensure water drains correctly into/away from the existing gutter Approx length 20m

I’m needing someone to install an EasyShed on an existing concrete slab. Shed is 3x1.5m gable roof. Already delivered ready to go.

Looking for an experienced concreter for a driveway, pathway and 3 floating entry steps with led light channel. Scope: - Driveway: 120 mm thick - Concrete: N32 / 32 MPa - Reinforcement: SL72 mesh - Finish: Exposed aggregate [91 sqm] - Pathway included [ standard] - Exposed aggregate colour/style: as per attached image - 3 floating steps, approximately 2.0 m × 1.5 m each - Floating step style/design: as per attached reference image Please include in your offer: - Total price in contract - Availability / earliest start date - Confirmation of concrete thickness, strength and reinforcement - Photos of similar driveway and floating-step work you have completed, or a link to your previous projects Please only respond if you have experience with exposed aggregate driveways and floating concrete steps.

I have purchased a pool pergola / pavilion from smart kits Australia, and need it installed. The posts will need to be concreted in into ground (see footing plan photos). There will be a slab poured once it is installed. Kit will come with instructions and I have machinery to dig the holes for the posts. You will need QBCC insurance as pergola will be council approved.

Installing flat pack shed 2.1m wide, 1.07m deep, 1.8m high and anchoring it to existing concrete slab. Ready to go now, in Ripley

Total area 160 sqm plus..needs rate plz.job to be completed in 1 month time

Needing shed assembly as per picture and specs below .. onto a concrete slab, all parts required have been ordered .. slab being poured 15.08 .. and will next a week to cure. Bonus if you can do our letter box too

Need a quote to have a deck/pergola built for front yard

Widen existing driveway 9 x 0.65 mtr on one side and 9 x 0.2 mtr on the other side. Exposed aggregate to match existing driveway.

Looking for and experinced demolition labourer to work hourly rate of $40 per hour. Must be available on Monday the 3rd in the morning around 8 AM. The task would be strip the floor tile and place in in the skip bin provided. Helping the carpenter to do the dry wall sheeting. Thank you

Looking for and experinced demolition labourer to work hourly rate of $40 per hour. Must be available on Monday the 3rd in the morning around 8 AM. The task would be strip the floor tile and place in in the skip bin provided. Helping the carpenter to do the dry wall sheeting. Thank you

Removal or 3x2.5m shed, concrete slab, treehouse, garden around shed and timber sleepers

Hi there, Looking for an experienced bathroom renovation labourers to do the demo. Must be available on Monday 27th of July in the morning. Hourly rate $ 40.

Keter Garden Shed 1.9m x 1.2m ready in flat pack box to assemble. Online Manual available as well as one in the box. Will help to hold parts during assembly if needed.

Help load up skip and demolish some decking / framing. 7 hours

Just need some driveway lights installed please. 2x holes (on each light) which need to be screwed into driveway. Very easy job. Just don’t have the masonry drill bits. Total of 4 lights. Already have screws and lugs.

Looking for someone reliable this afternoon to help move approx. 3 cubic metres of rocks/gravel from the driveway to the backyard. Access is straightforward, but the material will need to be moved by wheelbarrow or similar. Happy for you to use your own equipment if you have it (wheelbarrow, shovel etc.), otherwise I can provide basic tools. Would suit someone reasonably fit as it’s manual work, but it’s a simple job and can be knocked over in a couple of hours. Offering $150 for the job. Located in Dinmore and ideally looking for someone who can come this afternoon.