Find skilled builders in Outer East Melbourne

Install driveway gate, all materials are provided using Bunnings rapid fence gate frames and fence panels. Similar to the images.

Hi, I’m looking for an experienced handyman/carpenter to complete the roofing of my existing pergola. The pergola structure is already built, as shown in the photos. I will purchase and supply the EZ Glaze polycarbonate roofing sheets myself. I need you to: * Adjust/modify the existing roof structure to create the correct slope/fall for water drainage. * Adjust/add the timber battens/rafters so the spacing is approximately 600 mm, suitable for the EZ Glaze sheets. * Ensure the structure is strong, properly aligned and ready for the roofing. * Install the EZ Glaze sheets. * Install all necessary flashing, joiners, fixings and seals for a proper weatherproof finish. * Supply and install a suitable gutter along the lower edge of the pergola, including the required downpipe and connections. * Ensure rainwater drains correctly into the appropriate drainage area. * Clean up the work area after completion. Important: I will supply the EZ Glaze sheets. Please include labour and all other required materials, including guttering, downpipe and fixings, in your quote, or clearly specify anything I need to supply. The pergola is approximately 4 m × 4 m. Please only apply if you have experience with polycarbonate/EZ Glaze roofing and can properly assess and create the required roof fall. Please provide: * Total labour price * Estimated time to complete * Materials included * Earliest availability

Seeking an experienced person to assemble and securely install a Lifetime 2.1m x 2.1m Plastic Garden Shed onto an existing concrete pad. https://www.bunnings.com.au/lifetime-2-1-x-2-1-x-2-27m-desert-sand-polyethylene-plastic-garden-shed_p3318106 The job includes full shed assembly, positioning it correctly on the concrete base, and securely anchoring it to the concrete slab. Please bring own tools and suitable concrete anchors/fixings. Prefer someone who has assembled Lifetime sheds or similar plastic garden sheds before.

3x3m Mimosa DIY timber gazebo need installtion

Looking for an experienced concrete demolition person to break/jackhammer an existing backyard concrete slab. * Concrete slab size: approximately 3m × 3m (300cm × 300cm). * Slab thickness: approximately 120mm / 12cm. * Break/jackhammer the entire concrete slab shown in photos. * Purpose is to remove the slab so the ground can be levelled and prepared for new pavers. * Breaking only – no debris removal or disposal required. Owner will handle all clean-up and removal. * Restricted backyard access via 870mm / 87cm-wide garden door and narrow garden path. * All equipment must fit through the 870mm access. * Garden/tree along the access route can be damaged if required for access. * Contractor to supply all necessary demolition equipment/tools. * Must be completed by 7:00 PM, Thursday 3 September 2026 at the latest. * Experienced operators only – no first-timers or time wasters please. * Need someone reliable, properly equipped and able to get the job done quickly with minimal hassle. * Please only make an offer if you are confident you can complete the job within the deadline. * Location: The Basin, VIC. * See attached photos for slab and access conditions.

Assembly of small garden shed needed. https://www.bigw.com.au/product/giantz-garden-shed-1-62x0-86m-sheds-outdoor-storage-tool-workshop-house-shelter-sliding-door/p/9900116310?srsltid=AfmBOoqDtEXBDL0Mdq3evQUSsnrGbTGq8EQix3yFRvkqKzEzvHJSGLZp. I have the shed unpacked from its flat pack. I have tools available if needed. Easy access to where I want it assembled as well. I am in Croydon North and hoping to have it done on Thurs 27th Aug for me.

Concreate driveway and around the house. Driveway aggregate and around the house normal concreat. plan attached.

Need to demolish the bathroom, shower, bath tub, tiles, vanity and plasterboard for renovation works. And built in robe, doors shelves to be removed. Skip bin is available, load the rubbish into the bin.

I need someone to take all the sheets off the pergola in preparation to replace them.

Pergola with single post and fascia install. 2 sides will be fascia mounted/fixed. I have the pegola already, dimension are 4160L x 1990 W. Added example of pergola type

Hi, I’m looking for someone to install my shed from easy shed on a recently poured slab. Shed dimensions: 2.25m x 2.25m x 2.0m high

Assembly + repair: 2x EasyShed - https://easyshed.com.au/products/flat-roof-garden-shed-1-5m-w-x-0-78m-d-classic?variant=44452584194207 - https://easyshed.com.au/products/flat-roof-garden-shed-2-25m-w-x-0-78m-d-classic?_pos=2&_fid=1abb19834&_ss=c We assembled the individual panels ourselves but need help with the structural assembly — putting the panels together to erect both sheds. Also need one door fixed on one of the Sheds — it's not closing properly, cause unknown, will need inspection on site. Location: Wantirna South, VIC 3152 Site: Gravel base, ready to go Tools: Please bring your own tools Instructions: I'll provide the EasyShed assembly manual People needed: Open — bring a mate if you think it's a 2-person job Timing: Flexible, this week or weekend Budget: $300? open to offers

Assemble 2 ABSCO Sheds on existing concrete - 1. Absco Sheds 3.0 x 1.52 x 2.08m https://www.bunnings.com.au/absco-sheds-3-0-x-1-52-x-2-08m-monument-space-saver-double-door-garden-shed_p0079540 2. Absco Sheds 3.0 x 3.0 x 2.06m. NOTE : Individual sheets - Roof, 2 Side and Rear is already assembled. Front (with Door) sheet to be done before final assembly of shed. https://www.bunnings.com.au/absco-sheds-3-0-x-3-0-x-2-06m-monument-premier-double-door-garden-shed_p0084389

Need help completing the installation of this gable roof EasyShed. The door and front door panel require assembly, and the shed needs to be installed on a grass surface using the supplied ground anchors. Happy to give hand for installation. Needs to get done on Tuesday morning.

Need qualified handyman to replace one heavily corroded square steel post supporting my backyard patio/pergola roof. Safely supporting the roof while removing the old rusted post. Installing a new metal post that won't rust again at the base. Please provide guidance to avoid future rusting.

Install a 2.5m x 3.5 m approx pergola in backyard colorbond with timber, flashings, guttering, painting, and lighting? TBC Cost - asking for quotes - inspection

Hello, I need my driveway washed and painted. I will supply the paint only, tasked to bring own tools needed. My driveway runs up and hill and a little bit behind a gate.

The screws connecting the gate control mechanism to the gate have stripped, and continue to come lose. The gate motor needs to be securely reattached to the gate.

There are 3 sheds . 2 has slabs under them. Need to demolish them and clear the rubbish

I’m looking for an experienced carpenter / handyman / decking specialist to help repair and refresh an existing timber pergola attached to the house. The pergola structure is generally intact but needs some repairs, replacement of weathered elements, and an overall tidy-up/finish. Photos are attached for reference. Scope of Work 1. Pergola Roof Sheets Replace the existing transparent roofing sheets Install them properly within secure rails or framing so they are stable and less affected by wind Ensure sheets are sealed and fixed properly 2. Flashing & Barge Boards Inspect and replace damaged flashing where required Replace barge boards that have deteriorated Ensure weather protection between pergola and house wall 3. Timber Lattice / Side Panels Replace some of the wooden lattice/side panels Ensure they are securely fixed and aligned 4. Timber Repairs Replace or repair any visibly damaged timber sections Reinforce areas if required 5. Lighting Provision Provide a simple provision for lighting (either solar or standard light fixture point) I’m open to suggestions for the easiest solution 6. Finishing Sand the pergola where needed Apply a clean and neat finish (paint or stain depending on recommendation)