Find an experienced builder in Ipswich

I need someone to install two small sheds (10sqm each), a pergola (22 sqm), a greenhouse (144 sqm) on my farm located at Lake Manchester (post code 4306)area in Brisbane. I have all materials, plans and manual instructions ready to install. Can give hands if needed.

I need a patio for my pool deck . Roughly 3.4m by 6m . Cool deck preferably.

Shed setup. Concrete slab and assembling of the shed.

We are after someone who could assemble a shed (flatpack) and also help move an empty water tank.

I need someone to install two small sheds (10sqm each), a pergola (22 sqm), a greenhouse (144 sqm) on my farm located at Lake Manchester (post code 4306)area in Brisbane. I have all materials and plans ready to install. Can give hands if needed

Cut and fit insulation to outside pergola area. 36 sq feet. Similar to shed insulation, no ceiling. Will put amount in 'budget' but would welcome quotes.

size 3.0mx.78x1.95 Concrete already in place Want it fixed to slab

I have a 3x3.75 meter shed already delivered and was hoping you could install it please. It is the tall one with the 2.1meter high sides

Remove an internal wall, and replace with 2 new ones with a cavity sliding door. See attached house plan pic. New walls are in green and the wall to be removed has the red cross over it. Must have insurance and be licensed.

Pressure clean driveway and reattach pavers to concrete driveway. The driveway is made up of pavers over a concrete base. An area of pavers approximately 2 metre’s by six metre’s have become loose need to be cleaned up and re-adhered to the concrete base. A proposed method follows. 1. Pressure wash the pavers top and bottom, and the underlying concrete base, to remove all dirt and debris and ensure surfaces will properly bond. Ensure pavers and driveway are dry before commencing next stages. 2. Stick the loose pavers back in place using Dunlop 2kg Wall And Floor Tile Adhesive or some similar product. 3. Once clean, apply the tile adhesive to the concrete using a notched trowel to create ridges in the adhesive. Then apply a smooth coating to the paver. When the paver is pressed into place, the ridges will squish, creating a vacuum between the adhesive on the ground and the adhesive on the paver. This will create the best adhesion possible. 4. Sweep in paver bond (a fine sand that can be swept between the pavers). The sand is coated with a special polymer that acts as a binding agent when activated with water. This will help to lock everything in place.

Builder required to assist with council approval and compete works on a full house Reno

We purchased 3x3 easy shed and need it to be assembled and anchored over pre-made wooden deck (photos attached).

Building a 5.7m wide by 2.5m high wall into my office spa Please contact me directly to discuss proper cost Price negotiation

Needing a 3x3 shed put together and secured to the concrete slab. 1 wall has already been put together but its just a bit challenging trying to look after Bub at the same time.

Technical drawings of blade holders for our shredder machine

Need a sealer applied to driveway to protect it from cracking and UV. The driveway has been cleaned this weekend. So just need applying sealer. Can purchase sealer. Need to bring tools.

QUOTE PLEASE Looking for someone to visit property, look at scope of work and provide a quote to build a 5 M( H) X 3.5 m ( W) brick wall - approx not measured . fix kitchen tiles on the wall. Job required around the outdoor BBQ area at our home. Also need installing a garden shed on a new concrete pad Quote needed

Garden Shed Install - Brand New

Need to remove one oil stain off a driveway. Very fresh, only a few days old. Needs to be completely gone.

Please provide a quote to build a Matador Spark 6 bbq