Find a professional bricklayer in North West Melbourne

Repair cracking in brick mortar. Need colour matching and clean. High quality work required

Build brick curved bench seat

I have one job to be completed. Brick wall at front of the house.

I need a bricked retaining wall completed it is 18m L shaped wall with 6 courses to it bricks are supplied and mortar would be supplied both ends of the L need be curved All you would need to bring is your cement mixer and tools

Want brick letter box with letter box opening Bricks supplied

I need a concrete base to install a letter box on it. The concrete path in front of my house has a 8 degrees slop and the base should be in level for letter box to be properly installed. The base is 28cm x 36cm x (up to) 10 cm. I have a bag of the concrete mix.

We have a brick Chimney that need to be sealed as it leaks in heavy rain. No obvious damage to the bricks but the mortar on top is cracked. However we think it's more than that as it has leaked since installation of a wood oven when mortar was new.

The building is double bricked with the external wall requiring repair after some utilities works. Have bricks on site but one has been damaged during the utility work and will need to be replaced. Flexible on price.

Need a tradesman to core-drill a precise 150 mm round hole through an external brick wall for a kitchen rangehood duct. Must use a diamond core drill to ensure a clean finish without cracking the surrounding mortar. Once the brick is cut i need rangehood to be installed. The wiring for rangehood plugging is already there

Hi, I am seeking a quotation for the brickwork component of a new front and side fence at my property. Property Address: Keilor East VIC 3033 Scope of Brickwork I require the construction of the brickwork only. Aluminium pickets, gate and infill panels will be supplied and installed separately. Front Fence * Approximately 16 metres long * 1.2 metres high * Brick feature columns to match the existing house façade * Brick plinth/base wall between columns suitable for aluminium pickets * One pedestrian gate opening (approximately 1.2 m wide) * Letterbox recess/integration within one front column Side Fence * Approximately 25 metres long * First 7.5 metres at 1.2 m high, matching the front fence * Remaining 17.5 metres at 1.8 m high with brick columns only at required intervals to support aluminium privacy panels Finish * Colour and finish to closely match the existing house façade. * I am open to your recommendation on face brick, rendered blockwork or Hebel if it achieves the same appearance and provides the best value. Please Include * Footings and concrete * Reinforcement where required * All brickwork/blockwork * Mortar, materials and labour * Rubbish removal * GST * Estimated construction timeframe * Warranty If possible, please provide photos of similar projects you have completed. Kind regards, Sai

Need bricklayer to repair damaged brick fence as per photos located in Niddrie.

Need brick wall fixed to blend in with the edge, I will provide bricks, but removal and replacement with cement is on you to provide

Brick wall has multiple holes that needs tk be filled. With same colour silicon or any other material.

Brick up where AC has been removed 4m of brick sill Repoint areas where mortar has worn away. Supply sand, cement and everything else needed for mortar Bricks are on site and cleaned Ready from July 13th and must be completed by COB July 15th

Repair some damaged brickwork and replace damaged gate post and fence.

Brick up area of wall outside

A garbage truck hit brick fence which needs deconstruction and relaying with the same bricks.

Replace small grass strip with bricks ( provided ) in driveway 4mt length X 91cm wide

Sourcing bricks to match

Looking for an experienced bricklayer to carry out repointing on a brick wall. • Horizontal crack approx. 80cm long • Remove damaged mortar and repoint properly