Find a professional bricklayer in North East Perth

Brick up window opening — Guildford Need an existing window removed and the opening bricked up as part of a kitchen renovation. Job is at a single-storey home in Guildford with easy access. Opening size: 840mm wide × 1100mm high Construction: Double brick (cavity) — external face brick is a standard red-brown (photos attached) Scope of works: 1. Remove existing aluminium sliding window, frame, and flyscreen 2. Brick up the opening to match existing external brickwork as closely as possible (double brick / cavity to match the wall) 3. Tie new brickwork into existing courses; ensure level, plumb, and properly bonded 4. Render the internal face to prep for painting (flush with surrounding wall surface) 5. Remove all debris including the old window unit You supply: all materials (bricks, mortar, sand, cement, render, ties), tools, and dump fee. Recycled / second-hand bricks are fine provided the external face is a reasonable colour match. Access: Ground floor, clear access to both internal and external sides of the wall. Photos attached showing internal and external views of the window. Flexible on timing. I do have some matching bricks though these need cleaning/mortar removed. So own supply might be better

Looking for someone experienced in bricklaying/retaining garden beds to build a curved raised garden bed wall in our backyard. We already have: - Approximately 500 recycled bricks onsite - Existing paved area - A rough layout/outline of the shape we want - Some sand onsite for concrete/mortar (may require additional materials depending on your recommendation) - Some larger blocks/bricks to use along the back edge between the bed and retaining wall/fence The main curved front wall will be approximately: - Around 6 bricks high at the highest point - Curved shape (already marked out with bricks) - Roughly 500 bricks total for the front wall We are after someone who can: - Help finalise the shape/levels if needed - Prepare the base properly - Build the wall securely and neatly - Advise what additional materials are required before starting This is for a decorative raised garden bed, not a structural retaining wall. Please provide: - Examples/photos of similar work - Whether you would mortar or dry-stack/reinforce this type of wall - Estimated timeframe - What additional materials/tools you would require. Happy for practical, cost-effective solutions rather than overengineered construction. Thank you.

Brick laying and window installation and rendering

​I am looking for a professional bricklayer to repair a section of my garden wall. As you can see in the photo, there is significant vertical cracking and mortar separation extending from the capping down to the base.

Need a handyman with experience in bricklaying and rendering . I am planning to tidy up walls around the pool area. Quote me the price by viewing pictures or in person.

New opening required in brickwork. Ready for plasterer. There will be a support beam put in the door prior to works commencing, bricks can be removed up to the roof and a wooden frame around edge to be put in for plasterer. Picture attached of existing wall and shape of desired arch.

Old aircon hole bricked up. I don't have bricks either.

We have some house wall external bricks that need to have the morter replaced we also have some broken brikes to be replaced doesn't need full tuck pointing but does need moreter fixed and not with concrete morter but lime photos attached

Suit retired brickie that likes small jobs. Build double brick wall to fit kitchen cupboards in gazebo I may have other work also if they are proficient.

I have a front boundary wall with old wooden pickets that are falling down that I want to remove and replaced with bricks.

We need some bricks taken up from the marked area shown in the photo , leaving the other bricks in the ground.

Want feature bricks laid around our letter box we have the bricks and cement Around 2 to 3 course high

Front brick wall to council regulations. Approx. 10m including front and side required. Inspo photos also included.

Description: I am looking for a qualified builder or structural masonry specialist to repair and stabilize severe vertical cracks in two separate walls on my property (see attached photos). The Job: Corner Wall (Retaining/Boundary wall): Has a significant separation crack at the corner. Needs heavy-duty stabilizing (likely corner brackets or deep stitching) to stop the wall from leaning/pulling away further. House Wall (near door frame): Has a long vertical crack that needs proper masonry crack stitching to bind the wall back together. Scope of Work Required: Grinding out mortar beds/slots across the cracks. Installing stainless steel helical bars (crack stitching bars) with structural grout/resin. Installing external brackets if required for the corner section. Filling the cracks and making good the render/finish (ready for paint). Requirements: Must be experienced in structural masonry repairs. Must have own tools (grinders, applicators, etc.) and supply materials (Helifix bars, grout, etc., or specify if I need to buy them). IMPORTANT: When making your offer, please briefly explain your proposed method. I am looking for a proper structural fix, not just filling the crack with silicone or cement.

Small brick work for garden Type of gardening: Other Size of garden: Under 50m² Has green waste bin: Yes

Need a garden edge bricklayer with rendering done. Not big job

Recycle brick paving in basket weaving pattern 8.5 meters x 6.5 All ready to go

600/700 Mud bricks to lay to finish the job. Mud bricks are larger that normal house bricks. Mortar is mud also. About 40 brick will be at second story height. Scaffolding is on site. We are in Gidgegannup 6083. Power and water available on site. All materials are on site.

I need a skilled handyman / bricklayer / mason to repair damage to the corner of a stone/brick pillar where a metal fence post is installed. The corner stonework has cracked and broken away, and the post base appears loose or poorly supported. The job will involve rebuilding and stabilising the damaged corner so it is structurally sound and visually tidy.

I need to finish off a curved wall at the back of my house. I need about 20 limestone bricks to be professionally laid to complete the wall. I will have all the limestone bricks and cement available. You will need equipment and experience to continue the wall using the same mortar joints.