Find a sockets and switches installation professional in VIC

Replace/Install couple of switches in my ensuite that has stopped working

Install 11 Aqara Smart switches to replace existing switches. Installation only, I have the hardware already. Licensed electrician only

Looking for a Victorian licensed electrician working under a Registered Electrical Contractor (REC) to replace existing light switches with smart switches at my home in Deanside (western Melbourne). Must-haves (please do not offer if you cannot meet these): • Current Victorian electrician licence (A-grade / LEW) • Work performed under a current REC registration • Issue a Certificate of Electrical Safety (COES) after the work and provide me a copy (non-prescribed is expected for switch replacement) • Include your licence number and REC number in your offer so I can check Energy Safe Victoria Airtasker Electrical Badge is preferred. I will also verify licence details before booking. Scope • Replace existing wall light switches with smart switches (same locations – no new points, no extra wiring runs unless a switch is missing a neutral and we agree a workaround) • Check each switch point for a neutral conductor (needed by most smart switches) and confirm compatibility before installing • Test each circuit after install (lights work, no flicker, switches pair / power correctly) Please include in your offer 1. Licence number + REC number 3. Whether COES is included in the price 5. Soonest available date 6. Public liability insurance confirmation Unlicensed offers will not be accepted. This must be done legally and certified.

Hi, I have a damaged double power point in my kitchen/bathroom area. One of the power sockets is damaged and needs to be replaced in kitchen room and damaged bathroom switch button the middle switch button is damaged Two things needs to be done taaaa

I have three two-way lights (two switches per light). One switch on each pair already has a Shelly. I want a Shelly added at the other switch on each pair as well. These are smart bulbs (Wiz). The bulbs need to stay permanently powered. The wall switches should operate as inputs only and should not cut power to the lamp. No-neutral Shelly modules caused flicker on these bulbs, so they are not suitable. The extra modules need a proper active and neutral. There is no neutral at the switch plates that do not already have a Shelly. There is a neutral at each plate that already has a Shelly. Separate item: a two-gang plate. One mech is connected to a light, the other mech is spare and not connected to a load. I want a Shelly on the spare mech for automations only. It needs power only, not a lamp on the output. That spare mech also has no neutral of its own.I have already bought 4 × Shelly 1 Gen 4 which can be used.

Looking for a licensed electrician to modify the existing bathroom switch/wiring so the exhaust fan and bathroom light can be controlled independently. They are currently connected to the same switch. I’d like them rewired to separate switches so I can turn the light and fan on/off individually. Please assess the existing wiring and switch arrangement, supply/install the appropriate switch mechanism and any minor materials required, test the installation, and provide a Certificate of Electrical Safety. If additional cabling or more substantial work is required, please advise before proceeding.

Looking for a licensed electrician to: • Replace 3 existing old/damaged power point/switch fittings shown in photos with new white fittings. • Supply and install 1 new four-outlet (quad) power point above the kitchen benchtop in the location shown in the photos. • The new outlet will be used for a microwave and air fryer, so please confirm the existing circuit is suitable for the load. • Please include supply of standard white fittings, labour and Certificate of Electrical Safety in your offer. Photos show all existing fittings and proposed location.

Restore 2 x downlights and replace a couple of light switches.

• 1 x Single GPO at height 1800mm in bathroom recess (for dryer) • 1 x Double GPO at 600mm height in bathroom recess (for washing machine) • Replace 5 x old single bedroom/hallway light switches (new switches supplied) • Remove single light switch on wall (near recess) in bathroom

Licensed electrician required for a rental property in Narre Warren South. Work required: - Install/replace 2 hardwired smoke alarms - Replace 2 light switches - Remove the faulty existing patio light near the garage and install 1 Arlec LED batten light on the patio beam - Test completed electrical work I will supply: - Clipsal 755PSMA4 smoke alarms - Tesla light switches (1 gang into Kitchen, 2 gang into Laundry) - Arlec LED batten light Need a Certificate of Electrical Safety (CoES) as its a rental Please only offer if you are a licensed electrician and can complete the work on or by Thursday 10 September 2026.

I need 3 single light switches and 3 double light switches replaced as the switch will no longer flick.

Change 3 old dimmer switch to normal switch. Change 1 old fluorescent tube light fitting with a standard LED light fitting. We will provide all switches and light. Everything install on same location

Need a licensed electrician to: * Redirect the ceiling light-switch wiring and install the switch on the nearby wall. * Move the exposed switch shown in the second photo to the opposite side of the wall. Wall framing is open for easy access. Quote must include labour, basic materials, testing and safety certificate. Location: Coburg Budget: $350

Licensed electrician required to complete the following: - Remove six existing batten light fittings. - Convert and install six supplied Atom 8W dimmable LED downlights. - Downlights are white, tri-colour 3000K/4000K/5700K, with a 90mm cut-out. - Five lights are in standard, easily accessible ceiling locations. - One light is positioned above a stairwell, so suitable access equipment will be required. - Replace two existing three-gang switches with supplied Clipsal Iconic three-gang switch assemblies. All downlights and Clipsal Iconic switch materials will be supplied.

Replace one bathroom exhaust and 3 switches. See photos. Parts can be purchased or/and billed seperately (standard Bunnings pricing) after checking suitability and size of items.

I need to relocate 3 light switches in some walls. Plaster is currently removed making easy access. Will need a GPO with an extra switch added as well extra switch is for heated towel rail neednjob completed in next 2 weeks Last photo is the new GPO, first 4 are relocation positions

Replace existing light switch making a buzzing sound in the light fixture

I have purchased new light switches and power points for the whole house. I just need someone to install them all.

Some of the switches on the left side of the house not working. These are the plug points on the walls.

Need to repair/replace three Classic 2 Gang Switch and one PowerPoint Double GPO switch