Find a sockets and switches installation professional in South East Melbourne

I am looking for a qualified electrician to install an external weatherproof 15 amp GPO suitable to charge an electric vehicle. Please see photos of switchboard and nearby location for the GPO. I also need 2 light switches replaced. I have the new light switches ready, but not the GPO.

Need 4 light switches unjammed and 1 light switch repaired.

Need PowerPoints fixed/ replaced one is cracked and the other plugs don’t go into it

Hi, I’m looking to replace the existing light switches in my home with smart switches. I’ll be supplying the smart switches myself, and I’m only after help with safely removing the existing switches and installing the new ones. I’d also like to check whether there is a neutral line available inside the switch boxes. There are around 6–7 switches in total. Please let me know your availability, estimated cost, and preferred timing. I look forward to hearing from you. Thanks.

Supply and Install 3 xGPO power switches, 1 x sensor light on garage and 1 x 2 way switch in garage at my house in clyde north

My mechanical keyboard needs fix.two switches require replaced. Photos will be provided when requested.

Three light switches and bulb not working need to fix that.

To install New lights in 4 rooms/ places , New Wiring, switches, globe lights installing . As old down lights are not working properly

Need someone to replace normal switches with these touch switches I can do myself but prefer a electrician to do as these are not DIY STUFF Pls don’t send huge offers as these are pretty straight forward swaps

Needs the oven installed and a couple of ceiling lights just flicks. for these lights, we need to hit on the wall for them to turn on. Schedule: Need job done urgently

Need someone to please come and fix a couple of light switches, one has just had the clicker bit pushed into the wall so is still connected just needs to be fixed back into the plate or a new plate put in possibly? The other is still connected to the switch bit but there is no longer a plate on the outside so will obviously need to be disconnected from the switch and re connected to the new switch plate (which I have a new one here ready to go)

Change 3 single light switches and replace 1 LED light. (switches and light supplied)

Hi , I have 13 switches already wired with Neutral wire needed to be swapped with DETa smart switch 13 Nos in total Theatre - 1X single gang Living - 6 x gang Laundry -2X gang Hall way -4 x gang Master 2X gang Ensuite Bathroom -2X gang Backyard- 3 gang Back hallway - 2 Gang Bedroom 2 - 2 Gang bedroom 3 - 2 Gang Bedroom 4- 2 Gang Water closet - 1 Xgang Common bath -3 gang Once swapped an electrical certificate is required as well. Just wiring and installation ( Swapping) is required. I shall do the configuration All the switches will be provided . Bring tools

Looking for a licensed electrician to install 5 separate wall switches for our warehouse highbay lights in Dandenong South. Switches to be mounted right next to the switchboard. Each breaker needs its own dedicated switch (not a 5/6-gang), so we can swap to smart switches in the future. If you need to turn the whole board off, then it needs to be done after 4:30pm. Otherwise anytime if you don't. Ideally today (Thurs) if possible.

Need 3 light switches replaced. 2 x 3 way switches for fan / heaters in on suite/bathroom. 1 x 3 way switch in dinning room

Need to install two power socket in toilet and also in one of room. For toilet we have one socket but i need to have another one to install bidet. I need this work to be done on Saturday only.

Looking for an electrician to update approximately 16 downlights from warm white to cool white. Not sure if this requires replacing the fittings or if the existing ones have a switch/setting to adjust the colour (see attached photo). Also need 2–3 new power sockets installed.

I want to get 2X 10amps power points installed in the ceiling of my outdoor alfresco to plug in 2 outdoor heaters each 2400kw. I want the new power points to be connected to 2 new circuit breakers. I have spare space in the main board for additional breakers. The house is double story brick veneer located in Officer 3809. The distance from the switch board to the alfresco is about 20 meters. Please can you help?

One of the breakers is switched off. When I flip it back to the ON position, it immediately trips again. As a result, the central heating system and the plug switches for the rooms connected to that circuit are not working. I have tried removing all the devices connected to outlets in that area to rule out a faulty appliance, but the breaker still trips as soon as I turn it on. The only thing I haven’t been able to check or isolate is the central heating unit itself, as I’m unsure how it’s connected or whether it can be unplugged for testing. Can you please assist with diagnosing or inspecting the circuit? It may be a fault in the heating system or wiring that needs professional attention.

Replace 14 exisitng light switches with EyZEE® Zigbee Smart Light Switch. Mix of 2, 4 and 6 gang switches which i will provide. Only require installation. Some lights are set up with 2 way switches and I prefer to keep that setup on the new switches.