Find local NBN electricians in SA

After an NBN fibre installation, one of my network points (connected to a UniFi AC Pro) has stopped working. I believe the issue is at the end where the NBN installers worked.Task steps a) Check wiring & connection at the unaffected end (installer used T-568A standard if I remember correctly).b) Access roof space to locate the cable (I know where to go). Cut the cable in the roof and terminate with a new RJ45 connector. Test connectivity to the living room point. C) use the network cable I provide to connect from my UniFi switch in the roof (1 non-PoE port available) to a PoE injector /Connect the repaired RJ45 cable to the PoE injector /Plug the PoE injector into a power source in the same area. I will provide Network cable/PoE injector & power supply/ladder. You will need Tools for RJ45 termination and testing. If the work is not as I have specified and need to lay a full cable etc then you can advise at that point and we can agree on the price

extend WiFi cable from NBN (to the house) entry point approx 10 metres to another room in a brick vaneer home

Had nbn installed I need a shelf and power point installed to eliminate cords

Ill send you pictures once i get home

I need to connect nbn at home asap. I've got old phone lines which may have been cut in the past so not sure if or where I can plug in. I want to place the router/modem in a particular place so likely to need power point added. There is also hall light that needs to be fixed, and need to replace hard wired smoke detector as it's over 10yo.

Need to install a new NBN Internet cable into the wall but there is an old internet adopter in the wall which is not compatible. So a new socket/adopter needs to be installed into the wall. This may help get the wireless Internet connection. New NBN box with cables and the old socket/adopter in the wall are attached.

Customers property is being renovated and need to relocate nbn box from office to Hallway cupboard approximately 5 meters and reterminate fibre if necessary. I am an Electrician and will be on site and can help with the relocation of the cable if necessary. Friday 21/2 would be ideal.

NBN box inside the house is mounted on a gyprock wall, I want to relocate it 1800mm over on the same wall. NBN advised this can be done by any cabler (ACMA cabler).

We are needing to relocate a fibre NBN outlet within the home as we are due to commence renovations. We would also Like to temporarily relocate an intercom/video system for our gates. Seeking qualified electrician only.

Need to move NBN outlet from a bedroom into the office. Need a qualified and approved NBN contractor.

Cant locate my NBN wall outlet

Need an NBN approved electrician to move my nbn and modem connection to another room. Flexible on day and time. Going off approx $40 an hour but please let me know your hourly rate and any material costs.

The cable doesn't fit into the wall.

The NBN technician cannot fix our NBN connection. He said I should hire an electrician to fix the NBN connection that may have been cut during the renovation of the unit.

I have recently moved to a new rental property. Nbn official website shows there is a telephone line connection in the property where I can get nbn from but there is no any visible socket found.

NBN technician has already connected but we need to connect it from the ground floor to the level 1. We already have the cables but we need to find the correct port for the first floor which connects the ground floor. The ground floor NBN connection is already done and we have to find the connection from ground floor to level 1.

Need to separate my phone socket smart wiring lines from all the nbn line wiring. Having issues with internet. Please reply if you have experience on this area.

I need an NBN cable ran through the ceiling cavity.

Run an NBN cable from a bedroom to the kitchen via the ceiling

Just need conduit run up an eave through the ceiling, down the wall cavity into the garage (around 6m)(for NBN NTD install).