Find a professional motorcycle mechanic in Sydney Northern Beaches

My Hyundai 33cc Petrol Pole Hedge Trimmer slips between the shaft and the head unit so the trimmers do not work. relatively new and only used a couple of times but out of warranty. looking for a confident mechanical repair job.

Fix dent in car. See photos

Motorcycle check engine light on, battery recently replaced some other issue. MT03 660cc 2014 model.

Motorbike reattach front break

My sunroof seems to need a service and re-alignment. The motor still runs, in fact the sunroof still opens, but does not close. Car is located in Brookvale NSW on the northern beaches.

HONDA CBR125E Has been sitting for 2 years has rust in tank but has only done 998kim I want to make it road worthy to sell

I have a error code 5 on my Dirodi Gen 3, I also need a minor repair on it

Right Wheel catches and gets stuck

Left mirror on 2011 Ford territory is damaged and needs repair. The mechanism to make it move still appears to work. I am happy for just the mirror to be attached and/or the shell on the front to be also fixed. I am open to reasonable offers.

The amp won't power up. Maybe a valve? It's the first problem I've ever had with it. I'm happy to pay $50 for you to look at it and then for any parts and reasonable labour charge on top

Vehicle: 2013 Volkswagen Golf Mk6 Comfortline TSI 118 Wagon (AJ5 1.4 TSI Engine) Issue Description: Engine oil was at zero. Added 5L of oil (instead of 3.5L) and drove for 5 minutes with the oil cap missing. Engine slowed down gradually and stalled. After waiting 30 minutes, the engine cranked once but would not start. Now, when turning the key to "ON," the A/C system cycles on and off erratically. Request for Diagnosis & Fixes: 1️⃣ Drain Excess Oil & Check Oil Condition Drain oil to correct level (3.5L max). Check if oil is foamy/aerated (indicating oil pump cavitation). Replace oil & filter if aeration is present. 2️⃣ Inspect & Clean PCV System & Intake Check if oil entered the PCV system or intake manifold. If oil is present, clean the throttle body & PCV hoses. 3️⃣ Inspect Spark Plugs & Cylinders for Oil Contamination Remove spark plugs; check if they are fouled with oil. If oil is in cylinders, clear it before attempting restart. 4️⃣ Check Electrical Components (Sensors & Alternator) Inspect crankshaft & camshaft position sensors for oil contamination. Test the alternator & battery voltage (possible oil damage). Ensure all ground connections & wiring harnesses are clean. 5️⃣ Manually Rotate Crankshaft Use a socket on the crank pulley to check if the engine turns freely. If it doesn’t turn, diagnose hydrolock or bearing seizure. 6️⃣ Check Timing Chain Alignment (If No Start) Verify if the timing chain tensioner lost oil pressure, causing misalignment. 7️⃣ Scan for Error Codes (OBD2 Diagnostics) Retrieve any stored codes related to crankshaft/camshaft sensors, misfires, or oil pressure issues. Priority Actions Before Restart Attempt: ✔️ Drain excess oil to proper level. ✔️ Clean PCV, intake, and sensors if oil is present. ✔️ Check spark plugs & battery voltage. ✔️ Manually crank engine before using starter. Anything else? Hopefully just a minor issue.

Motor won’t start. We’ve changed the spark plugs. Somebody had a look at it quickly for us and said it seems to be ok but it just won’t start! We can bring it to you or you can come to us

Cracked windscreen needs gluing

2009 Honda VTR 250cc in need of a service and wheel alignment. Work can occur out of my garage in Balgowlah. You will need your own stand and tools

I’m having trouble getting my bike to start and could use some help diagnosing the issue. It was working fine before, but now it won’t turn over. If you have experience with bike repairs or troubleshooting, I’d appreciate any advice or assistance. Happy to provide more details on the symptoms. Motorbike Suzuki LB650 2008

Looking for someone who could fix up this dent and scratch

reverse camera is splitting into 2 on screen and sometimes just says not available on screen

I've got the tail tidy kit and just need installation and I would like the chain relubed as well as it's reached it km for it to be done. The bike is a vulcan 650 s

I have an after market reverse camera fitted on my Ford Focus 2012 but it’s not working. I need help on fixing it.

Need someone to come and have a look at the wiring and fix it