Find a local Tasker to help you make a kitchen cabinet in Sydney Eastern Suburbs

We are preparing a kitchen cabinet for an installation of a dishwasher. We have removed the doors of the cabinet. We will require the bottom of the cabinet and top bit of timber to be removed to allow space for the dishwasher. The bottom and top parts we want removed are fixed in tightly and the top part of timber is glued. This may require a pry bar and/or electric saw.

Hi! I’m looking for an experienced carpenter or professional handyman to help me modify a section of my kitchen cabinet so I can install a new dishwasher. I need the drawer and the internal panel under the bench (shown in the photo) to be carefully removed/cut to create enough space for a standard-size dishwasher. The other cabinet doors and the benchtop must remain intact. What’s Required: Remove the drawer + internal panel Cut/adjust opening to fit the dishwasher Leave a clean, tidy finish No plumbing or electrical needed Must bring your own tools Ideally available this week

I have existing cabinetry space that I would like to install doors and a shelf to increase storage above the washing machine. I need: - cabinetry dowel holes drilled into existing space - cabinetry doors made and fitted - cabinetry shelf cut and fitted to space Open to pricing discussion s

I need to replace the base cabinets in a kitchen like for like. 1.- One consists of 4 drawers (3 drawer front one hidden draw.) 2- A set under the sink - Two drawers. 3- A corner cupboard. The kitchen was flooded a while ago so it has to be replaced. They are just ikea flatpack cupboards. Has a stone bench top that I want to keep.

I’m looking for an experienced handyman or finish carpenter to add decorative moldings to my kitchen cabinets. I want to match the style of molding that’s already on my island cabinet (you can see it in the photos). Details: • The job involves installing similar trim on the upper and lower cabinets. • I’ll provide the photos for reference, and I’d like a clean, polished finish. I will provide the material needed.

Repair front side of kitchen drawer. Cabinet brand unknown and mechanics look complex! (See pics)

Build the Kitchen Island Cabinet fully according to specifications.

I currently have a whole corner of my kitchen cabinetry which has gone unused due to the current setup of the doors. I am after a cabinet maker to see if the doors can be modified to accomodate a corner. Price opening door from two standard doors. Price negotiable

I currently have a whole corner of my kitchen cabinetry which has gone unused due to the current setup of the doors. I am after a cabinet maker to see if the doors can be modified to accomodate a corner. Price opening door from two standard doors. Price negotiable

We need the cabinet above our fridge cut so it can be raised up to fit our new fridge underneath. See photos. The fridge space right now is 850w x 1710h x 870d (and 622d on the left side). The fridge is taller than we have room for - its dimensions are 835x1787x730mm. The fridge's depth and width are OK, it's just the height that's a problem. So this task is for you to help us out. We need the cabinet taken off the wall to have some height cut from it, then mounted again 80mm higher up. To try and be ultra clear - new fridge is 1787mm high but the current fridge space is only 1710mm high. So there is an 80mm difference. We need that extra height to fit the fridge, which requires cutting the cabinets shorter. There’s 45mm of space to move it up, so the cabinets would be cut shorter by 35mm and moved up 45mm.

We recently had our dishwasher repairs but not the kickboard doesn’t sit properly and the cabinetry is out of alignment. We can’t open the dishwasher fully anymore. We think the kickboard might need to be removed, sanded and replaced

Hi, I have an apartment kitchen cabinet above my fridge which has a broken bottom shelf that needs replacement, plus some utensil draws won't slide and needing repairing. I also have an draw dishwasher which I am removing and replacing with a full upright model and need the small shelf removed with minor face trim made/installed to suit new dishwasher.

Hello, my revolving 360 Lazy Susan corner kitchen cabinet is no longer turning correctly. The metal in the mechanism at the bottom looks a bit bent from use over time and the plastic in the mechanism sometimes pops out. This results in it not spinning around smoothly and dragging against the inside of the cabinet or sometimes not revolving at all. The two cabinet doors are attached to the revolving cabinet. I think the mechanism will need to be replaced (if you recognise the model) or perhaps the whole rotating cabinet may need to be replaced.

We have a fridge opening that we want to accomodate a taller (but not wider) fridge - see photos - we want the doors to stay the same and attached to the side, just the base of the cabinet to be lifted

One of our kitchen cabinet doors has become discoloured when attempting to fill a chip on the front (see attached photo). We’re looking for someone experienced in cabinet repairs who can either: Restore the existing door to match the others, or source and install a new door with the same routed panel design and color. Job includes assessing the damage, advising on the best solution, and carrying out the repair or replacement. Materials can be discussed depending on what’s needed. Located in Maroubra, flexible with timing but would prefer ASAP. Please send through examples of similar work if you have any.

We want the kitchen cabinets and base of our kitchen island in Dulux Renovation range, following the procedure outlined here: https://www.dulux.com.au/projects/interior-projects/kitchen-dining/cabinet-doors/ and using the materials indicated. We will cover the cost of the materials. Photos are attached. The only thing that needs painting is the dark wood veneer.

I need my kitchen cabinet doors replaced, or repainted, double pack..the doors that have been painted, it was not double pac, hence paint coming off. 5 doors in total..the first picture is the actual kitchen. Second picture the new colour and style. This job need to be double double pack paint.

I need a carpenter or handyman to fit out kitchen cabinet doors. The cabinets are existing and just need doors See pics below

I’m happy to do a thorough clean of the doors and drawers and wooden panels. You’ll need to Dismantle and label doors and drawers. Lightly sand all laminate (with wood effect) Prime (for laminate) 2 coats of paint (for laminate) Put back correctly Top cupboards, oven panel and fridge side cupboards to be white Bottom cupboards and under bench to be darkish blue Kick board also to be painted. (Please provide Protection for flooring and tape appropriately to avoid contact with walls/splash etc.)

Remove one cabinet door to install dishwasher, potentially cut a second cabinet door to make everything fit, connect to electricity