Hire a professional home theater service in Ringwood East

Require a TV to be mounted from the Celling above the fire place. Also need a power point installed there too.

Wall mount a tv using bracket already supplied. Screws/tools required.

Need Tv to be mounted to a plaster wall. Its a Kogan 75 inch tv. Wall mount photo is attached.

We have an aerial (already plugged into its lead) sitting on the ground. It needs to be reattached to its support stand (using provided u-bolt) and then the aerial and stand bolted back up on the house. The support stand needs to be attached to the barge boards at the top of the roof (approx 4 metres up) using four carriage bolts (supplied). Note there is not much room to work, as it's a small gap between house and fence. Need to supply own ladder/tools. Photos show the aerial, stand, bolts, house and narrow work space.

This is a pre-wiring job only. I am preparing the room for future home theatre upgrades. 1. HDMI and Conduit Run (Projector) • Supply and install a HDMI 2.1 Active Optical Cable (48 Gbps) from the AV rack location to the ceiling projector location (approx. 10 to 15 metre cable run) • Cable must be installed in the correct direction, with the source end at the AV rack and the display end at the projector • Install 50mm conduit in the ceiling cavity to support this cable run • Include a CAT6 cable alongside the HDMI for future projector control or firmware updates • Include a pull string or draw wire in the conduit for future cable upgrades • Test the HDMI cable using either a dedicated tester or by temporarily connecting a 4K source and display • Label both ends clearly: “HDMI – Source End” and “HDMI – Display End” 2. Speaker Cable Wall Terminations • Use the existing in-wall speaker cables for a 7.1 channel setup • Supply and install a 7.1 speaker wall plate at the AV rack location • Wall plate must be compatible with banana plugs • Terminate and label each channel: FL, FR, C, SL, SR, SBL, SBR, SUB • Use a multimeter or continuity tester to confirm: • Each run is continuous and unbroken • Polarity is correct • Channel labels match destinations 3. CAT6 Cable • Run one CAT6 cable from the AV rack to the projector location alongside the HDMI • Label both ends of the CAT6 • Test with a network cable tester to confirm pin continuity Please include in your quote: • What materials you will supply (HDMI cable, CAT6, conduit, wall plates) • Estimated time to complete the job • Confirmation of signal and cable testing • Any access requirements, such as ceiling entry

Have existing full swing wall mount bracket and cable channel. Will need someone to replace the bracket to a slimmer fix mount and hang tcl 98inch c755. Vesa size is 500 x 600 and weights around 60kg. Please quote both new bracket and installation.

Set up foxtel box to tv using supplied foxtel box

Just need to know it’s working as good as it can. GME SRX

Purchased 2nd hand IN good working order but I don’t know how to plug it all in -

I just bought a new tv mount and would like it put on the wall - Due date: Needs to be done on Wednesday, 31 January 2024

Need to mount 50inch TV on wall. Bracket supplied, but will need to bring own tools to install properly - Due date: Before Sunday, 10 December 2023

Sony TV light flashes red 4 times everytime I turn it on. Model is a Sony 43 inch KD43X7000E - Due date: Flexible

55 inch TV mounted to wall with swivel mount, and electrical cabling hidden. - Due date: Before Tuesday, 18 October 2022

Can’t get normal tv chanels since connecting internet - Due date: Flexible

The cable tv connection for my TV isn’t working properly. It is connected to the TV, but the screen has glitches. Samsung digital TV