Find a local headlight bulb replacement expert in Melbourne

I have the restore kit, need someone to do the work and sand etc

Need some aftermarket headlights fitters to my 79 series landcruiser, old headlights will be out and just need to put these in will need to connect a couple of wires that come with it

Needing someone to help with a car headlight bulb replacement. We can provide the new globes however need screws for the clippers as they have gone missing. Thanks!

need my headlight bulb changed in toyota camry

2008 Mazda 3 Maxx Sport BK Series 2 hatch (build 04/2008), 2.0L petrol, manual, halogen (no HID). VIN supplied to accepted tasker for parts ordering and paint code. CORE JOB - driver's side (RH) front headlight: - Supply new aftermarket ADR-compliant RH headlight assembly with new globe sockets. Must be BK Series 2 HATCH part (04/2006-04/2009). Sedan and Series 1 lights do not fit. - Old socket/clip was damaged by arcing (globe pops out, a previous repair failed). Inspect loom-side H7 connector for heat damage, fit new pigtail if compromised. - Voltage-drop test on the headlight circuit. - New correct-wattage globes: H7 low, HB3 high, parkers/indicators. - Sign-off: run lights 10-15 min, connector stays cool, globe firmly retained, beam aim checked. OPTIONAL EXTRAS - quote each separately, same visit: A. RH rear outer tail light, NEW aftermarket only (current unit heat-damaged and crumbling). Correct-wattage globes, inspect bulb holder and connector for cause of overheating. B. Outer window belt rubber seals, all 4 doors (e.g. Machter WDS-MA001 kit or equivalent). C. Coolant expansion tank (pressurised type, 145 kPa cap). Dried coolant residue around current tank. Confirm leak source (tank/cap/hose) after fitting. D. Rough repair of rear bumper corner scuff (cracked/flaking paint). Sand back, prime, colour-matched aerosol blend (code from VIN). Tidy is fine, showroom not required. E. 7in double-DIN Apple CarPlay head unit (brand-name) replacing the factory stereo, incl facia kit, wiring harness, antenna adapter and steering wheel control interface (wheel buttons must keep working). CarPlay tested with my iPhone. Note wired vs wireless in your quote. LOCATION: Docklands 3008. On-site open parking and street options, or I can drive to your workshop (easier for the paint work). No deadline, flexible timing. Please itemise your offer (core + each extra) with part sources and warranty on parts and workmanship.

Replace right headlight globe. I have purchased both types of globes that could be recquired, although only one is needed. 2008 SUBARU FORESTER Replacement via opening the hood.

Replace headlights on 2017 ford Mondeo ambiente sportswagon (I’ll buy the bulbs and have them ready)

Looking to get the headlight globes replaced (I have the globes just need them fitted) must be today

My headlights are playing up on my 2015 ford ranger. I’ve had the bcm reset when my headlights stopped working completely and now they go most of the time apart from one headlight not sure what’s going on. Also my reverse camera that comes up on my rear vision mirror isn’t coming on. It has come on before which makes me think it’s just a wiring issue nothing wrong with camera. I have attached a photo of what it used to look like now it shows up blue then disappears

Someone to supply and install a new headlight plug, old one the wires have come out and it has heat damage

Need a headlight globe changed on a Skoda Octavia wagon. I can’t quite work out how. Have globe

Need main headlight and indicator bulbs changed on front passenger side of Renault scenic. Must have experience working with Renault cars as they are tricky and unique Bulbs provided

There is condensation inside the left headlight. Car: Hyundai i30 Sedan 2023. I am just putting a random number in the budget as not sure of the situation or the reason

Toyota CHR 2017 model. Headlight on the left side has stopped working. Will need it replaced.

} I provide professional headlight restoration services to restore dull, yellow, or foggy headlights back to a clear, like-new condition. I use sanding, polishing, and UV protection coating to ensure long-lasting results. ✔ Fast service (30–60 minutes) ✔ Affordable pricing ✔ Mobile service – I come to you ✔ High-quality finish and attention to detail Available across Melbourne. Send me a message to book a time

Hi, I’m looking for an experienced automotive electrician or mechanic to replace both HID headlight ballasts on my 2006 Lexus GS 450h (3rd Gen). I have already got the parts. Both ballasts are faulty and causing intermittent low beam drop-outs. I already have the replacement parts. This job requires front bumper removal to access the headlights, so please only apply if you’ve done similar work before. What needs to be done • Remove front bumper • Access headlights and remove old ballasts • Install supplied replacement ballasts (both sides) • Refit bumper properly • Test headlights for stable operation • Check wiring and connectors Please quote for labour only. I'm based in Ascot vale happy to bring the car down to workshop.

Would love to have my cars headlights restored and less foggy Looking for input whether a restoration kit is best or if some other means that someone can do?

I need someone who knows car electrics to install LED headlights in our 2007 Jepp Wrangler and confirm they are working as required by law. Pervious owner had some issues with the turning lights flickering etc

Job Title: Quick Job: Fit a Headlight & Seatbelt to my Mercedes CLA250 (2015) $150 negotiable price Category: Automotive Services / Repairs & Maintenance Job Description: Need a straightforward replacement job done quickly for my 2015 Mercedes CLA250. I have the parts ready, just need someone with the right experience and tools to fit them. The parts are second-hand and in working order. The Job: 1. Fit a used LEFT-HAND (passenger side) headlight. You’ll need to remove the old one and fit my replacement. The bulbs from my old headlight will need to be transferred into the new unit. 2. Fit a used DRIVER'S SIDE (right-front) seatbelt assembly. This includes the belt, pretensioner, and buckle. I have the part ready to go. My Budget & Timing: · Fixed Price: $150 negotiable price for the complete job (both parts fitted) which would take an hour or two hours max. · Timing: I need this done as soon as possible. If you can do it today or tomorrow, please let me know. Location: · Ideal: Fitzroy North (I can come to you if you have a local spot). · Flexible: I can also bring the car to your location anywhere within the Melbourne CBD metro area or within a 50km radius. What I Provide: · The car. · The used left headlight assembly (no bulbs). · The used driver's side seatbelt with pretensioner & buckle. Who I'm Looking For: · Someone with experience working on modern cars, preferably Mercedes or European models. · You must have your own tools. · Crucially, you need a proper diagnostic scanner to clear any SRS/airbag warning lights that may come on after changing the seatbelt (this is standard for any seatbelt replacement). · Just be confident, efficient, and know what you're doing. To Apply, Please Tell Me: 1. Can you do this ASAP? When exactly? 2. Do you have the necessary scanner for SRS/airbag lights? 3. Where are you located? (Fitzroy North is ideal). It's a simple job for the right person. Fixed at $150 bootable price. Let's get it done. Thanks

Hey all, Second time posting this, so apologies if anyone that commented earlier sees this again. Just want to clarify the issue. My 2008 Subaru Impreza RS has a melted headlight housing. I’m unsure what kind of bulb it housed, but I’m assuming it’s a H4 (dual filament) as when the bulb is out, my high beam doesn’t work either. Furthermore, when looking into each of the headlights, only one bulb can be seen (except the parking lights). This makes me think it’s a dual filament bulb and casing. Again, it’s melted so the wires need to be cut and spliced with a new harness. Hoping one of you legends can help me so I can avoid the Subaru dealership and running around wreckers trying to find the part. Cheers