Find local ev charger installers in Outer East Melbourne

Install 15A outdoor plug for EV next to DV board on side of house. Easy access, spare slots in DV board available, also - can re-use a spare breaker (not used anymore)

install a Tesla Wall Connector (supplied by me) in the carport: new 32A circuit, about 6–7m of surface conduit. Also replace the carport light with a weatherproof plug base LED battern, and fit Type A RCBOs in the existing switchboard (no board replacement). Labelled board photo attached; numbers below match it. a. Wall Connector: 32A Type A RCBO in the spare slot #8, surface conduit under the carport beam to the timber sleeve on the steel post. b. Carport light (circuit #5): weatherproof plug base, wall switch on post stays. Replace the old cable to the light and switch. Existing conduit is fine if usable. c. Board: aircon #1 (C32 MCB) to a 32A Type A RCBO. Remove the shared RCD #3 + MCB #2 and put their two circuits (roof-space GPO; gate + front yard GPO) on two Type A RCBOs. d. Swap the two Lanson C10 RCBOs #4 and #5 for Type A RCBOs. #11 is a spare for future solar, please leave it as is.

Already have the Envex E2 7kw charging unit. Just need a qualified electrician to install the unit. Switch board is directly opposite the garage. Unit will be installed within 2 meters from the switch board so it will be a straight forward installation.

I want install tesla ev charger. I have already charger and single story. Distance is around 18m to car port. Main amp is I think 40amp.

The switchboard is located at the front of the house, marked in red on the plan. The garage is attached to the house on the right. I’d like to install a Tesla Wall Connector inside the garage. I’ve got the Wall Connector.

Need a 3 phase, 22kW EV charger (supplied by customer) installed next to switchboard in garage. Needs a compliance cert.

Looking for a licensed electrician to supply materials, install, and commission a 3-phase Tesla Gen 3 Wall Connector in my garage. Job Details: - Double storey house - Three phase with solar and battery - Approx 20m cable run from switchboard to garage via roof cavity - Electrician to supply all materials (except for EV charger) - Compliance certificate to be provided

Relocate EV Charger From One Location to Another Location reinstall Noble park to Croydon vic May I know if I buy new unit install only how much will cost? Main switch board is located at the main entrance,

Would like to install the EV charge in the garage (2meter away from switchboard?,also but the switchboard is full loaded. Need to upgrade switchboard or install a subpanel(cheaper?)

Installation of Tesla charger. Single phase

I need a licensed Electrician to install my Tesla Gen 3 Wall Connector (hardwired, unit already supplied by me). ​Power: Single-phase supply. Requires a dedicated 32A RCBO circuit installed in the switchboard. ​Cable Run: Short run on brick wall right near the switchboard (see photos). ​Must supply all required materials (cable, conduit, 32A RCBO breaker). ​Must provide a Victorian Certificate of Electrical Safety (COES) upon completion. ​Photos of the switchboard and installation location are attached. Flexible with installation date/time.

Install an EV charger - all included with addition of a circuit breaker

I want zeeda 7kw charger installed next to main power board

I'm looking for a reliable labourer to assist a licensed electrician with the installation of an EV charger. Scope of work: - Assisting with pulling electrical cable under a house - Securing cable as directed by the electrician General labouring and helping with installation tasks - Working in a confined space beneath the house, so you must be comfortable crawling and moving around under the subfloor Requirements: - Physically fit and comfortable working in confined spaces - Reliable and punctual - Able to follow instructions and work safely Previous labouring or construction experience is preferred but not essential Duration: 1 full day of work, with the possibility of a second day depending on progress. Could lead to occasional on going work when needed if all goes well. Please let me know about any relevant experience you have and your availability. Looking for someone with a good work ethic who can provide an extra set of hands to help get the job done efficiently.

I’m looking for a qualified electrician to install a 7kW EV charging station (Ocular Lite Plus V3) at my home. Job details: * Install EV charger on wall near carport * Connect to switchboard * Ensure safe and compliant installation (AS/NZS standards) * Test and confirm charger is working properly Location: (near carport area) What I need from you: * Licensed electrician with experience in EV charger installations * All required tools and equipment * Compliance certificate after installation

I need a licensed electrician to install Tesla Wall Connector Gen 3 7.3M Type 2 EV Charger. My house is on stumps, 1st floor is just one large room right above the front part of the house. Images of the switchboard and the location where the charger should be installed are attached.

Need a licensed electrician to install and commission a Tesla Wall Connector. Please provide your REC number when quoting. Dedicated EV charger circuit already installed and protected by a 32A RCBO. Cable terminated in garage behind a Clipsal junction box. Tesla Wall Connector supplied. Installation, testing and commissioning only required

Bracket needs to be attached to car port wall. Drilling into bricks.

I need the Tesla charger installed in my garage

To install 11kW EV wall charger . Don’t need supply Double story home 3 phase