Find a local electronics repairer in Circular Quay

Hi, I’m looking for a licensed plumber to replace 4 taps total: 3 × basin taps (bathrooms) 1 × kitchen mixer tap All taps have hot and cold-water connections, and I already have the new taps ready to install. Details: Apartment is under 7 years old (modern plumbing). Straightforward replacements — no leaks or damage. Easy access under basins and kitchen sink. Please bring your own tools and plumbing tape. Photo 1: shows the new tap for bathroom Photo 2: shows the new tap and old one side by side, as a reference. Mirrors will be removed later.

Hi! We’re after a trustworthy handyman to help with installing desk dividers in our newly fitted office. The job needs clean, precise work. Tasks include: securely fixing supplied clamps in several spots; installing divider boards between workstations; making sure everything is level, flush and stable. All screws and clamps will be provided.

Replace the old shower head and tap with new shower head and shower tap. New head and taps providers. Located at Rousehill, need it fixed today

Need a painter to do a few touch ups around the office - minor things like scratches, and then a few skirting boards Location King Street Sydney CBD

Installation of heat lamps. This is for just one.

Furniture Repair – Chips and Dents (Chest of Drawers, Bedside Tables, Veneer Tables) Details: I need help with some furniture repairs: 1. Repair small chips on two bedside tables. 2. Fix three dents on a chest of drawers. 3. Repair chips on a veneer dining table. 4. Repair chips on another veneer table. Requirements: • Must have experience with furniture repair (wood/veneer). • Must bring own tools and materials for repair. • Looking for a neat finish as these pieces are for clients. Location: Sydney CBD showroom Timing: Flexible, but preferably within the next few days.

Compact essay to dryer keeps switching off every 5 mins. Need repair Located in bond st Sydney

I have a pair of Bose QC35ii headphones (in good condition and fully functional) with a broken plastic hinge that connects the right earcup to the headband and secures the headband cable. As a result, the earcup is loose, hanging by the cable, and can no longer fold or stay in the correct position when worn. The cable runs directly through the broken hinge and is hardwired to a circuit inside the earcup, so it needs to be removed and rerouted through the new hinge. To do this, the earcup must be disassembled, and a few thin enamel-coated wires disconnected and re-soldered. There are plenty of detailed tutorial online - would take 15 minutes for a skilled person.

Carpet joints stitches were opened and some tack strips were taken off to fix the flooring. Now this needs to be put back in original position

I'm professional installer of kitchens and various furniture. I offer repair of stone bench tops, chips, cracks. Starting price from 150$.

I need a collapsible photo studio background built and installed on a wall. This would be made from a sturdy material in a clean / solid white (e.g. white MDF board) and mounted directly onto a wall. It would consist of 3 boards that collapse on each other and lock into place, either closed against the wall or opened up into a corner. Each board would measure 60cm x 40cm. Please see the attached mockups. When open, the inside should not have any visible drill holes or hinges, the joins should be clean and almost seamless (i.e. there should be no gaps between the boards), and the bottom board should be strong enough to carry the weight of a heavy pair of boots or a handbag (i.e. 3-5 kg in weight). We should be able to lock backdrop open when in use and then also lock it closed (against the wall) when not in use. I've come up with a basic design that you can see in the attached mockups, but I'm open to an alternative design if you come up with something that looks and functions better. You can construct off-site, but I would like you to install it on my wall. Location is a small office on Level 1 of a building in the CBD. A lot of street parking (including 4 loading zones) just outside the building, and fairly quiet during the holidays.

Left trigger has stopped working

I have two bathrooms and I would like to replace taps in both of them. I am going to supply my own taps.

I need someone to repair my WH-1000XM3 Wireless Noise Cancelling Headphones as they have stopped charging and turning on.

I need help assembling a basketball game. You will need basic tools such as a screw driver and a hammer. It is a two hoop Arcade style game. Should not take more than 45mins to assemble According to instructions.

I need Audi electrician who check my meter sign and fix it it usually come when I turn on the right indicator

Shower dripping Basin tap dripping

my straightener is flashing red and beeping

Audio Outboard Unit - PSU Repair (Aphex Channel + PSU Circuit Diagram) I need an electrical engineer to diagnose and fix my Aphex Channel. This is outboard gear from an audio studio. The unit decided to stop turning on one day, despite being plugged into a high-end power conditioner. The unit's circuitry should be mostly intact, but I believe there is an issue with the power supply circuitry. These units were notorious for PSU issues, and this is the 2nd unit I've had where the PSU died. Upon internal inspection, there was no visible damage - unlike the 1st unit that broke, which had clearly burnt components. Note that the unit would sometimes take 20 seconds to turn on after powering it up, but this was supposedly normal behavior. I was technically covered by warranty when the unit broke, but the manufacturer had recently stopped producing them, which they claim allowed them to reject my warranty. Happy to ship the unit, ideally within Australia. Flexible on budget & time. Cheers.

external piece of plastic has broke off from hinge so the earpiece no longer sits snug on my ear