342 Driveway repair contractors in VIC

Need new section of driveway and 3 steps concreted. Reo already in place. Rough finish. Approx 3m3 worth of concrete required. Area is approx 25-30m2. Contractor to supply and lay concrete.

Removal of concrete from driveway approx 6.2m x 2.5m (concrete slab thickness approx 8 cm. Plus removal of bricks approx 1.8m x 1.4. You will need to bring all required tools and dispose of concrete/bricks. (Optional - level soil in preparation for new driveway)

Oil stain in driveway. Professional only

Need a colour bond manual double swing driveway gate installed for a back unit. Happy to discuss options, materials ect. depending on price. The distance across is 4480mm and the hight is 1800mm.

My concrete drive way is sinking down creating gap between driveway and walkway. Need options to raise it with non destructive technics like injection etc

Pressure wash driveway properly ready for Epoxy coat. Need to be throughly .. approximately 16m2 plus

Stains from oil. It need to be removed. Please professionals.

Driveway gate has been incorrectly hung. Will need new heavy duty hinges. Gate will need to be raised and rehung to open outwards.

Looking for someone to pressure wash: • Pebble concrete driveway • Front path • Concrete foot path on both sides of a corner block I need a solid clean-up to get the place looking ready for sale. Someone who has had experienced in pressure washing a pebble concrete area and understands how to do this safely required. Power and hose access available.

I need this area excavated and soil taken away. 150mm deep 7.2x3.8 Mentone

Requiring repair to the topper of a driveway wall, and some patching up of the outer rendering of wall

Install a drive way gate width as pic. Two swing gate with latch. One for 250cm width, the other for 115 width. Height is less than 180cm Post intalled as pic. Prefer metal material and wind resistant. Welcome an estimate offer.

My driveway has two spots where the pavers have sunk. Both around 75cm across. One of them is quite deep around an inch or two, the other is very gradual and not much of a problem. Would like a quote to fix just the bad one, or both. Would be looking for someone with experience in this job, making sure to have the tiles perfectly level with each other to prevent tripping hazards.

Hi, Need someone to suggest what grates I need to buy, and then install them in my driveway. Please note - I will supply the grates based on the suggestion. Photos attached.

Hi, I need a drain grate installed on the driveway and plumbed back to the existing stormwater downpipe. The driveways is concrete, so it will need to be cut to install the grate. Any gaps from fitting the grate will need to be filled back up with concrete. You will need to provide all required materials to complete the job. This is the grate which is required to be installed https://www.bunnings.com.au/everhard-3m-easydrain-polymer-grate-and-prejoined-channel_p4770175 https://www.bunnings.com.au/everhard-1m-easydrain-polymer-grate-and-channel_p4770206

Hi my driveway gate needs to be fixed into the hinges and the bolts need to be screwed back.

Tradesman left my driveway in a bit of a mess, I’ve tried to pressure wash it myself with my Ryobi washer but no success. Going overseas on Friday so hoping it can be done tomorrow (March 27). It’s mostly grout/tile adhesive and there’s oil residue on the bottom part of the driveway as well.

Fixing a Metal gate that dropped about half a cm need to fix the hinge by welding it back on

The left brick pillar needs to be dismantled and reassembled to increase the entrance width