Find a local colorbond fencing contractor in Blacktown

To install an extension to existing colorbond fence (attached photo), the length is 10m and height 75cm.

Installation of a colorbond gate on driveway (2450mm width). Installation of 1 panel colorbond fence (1860mm width)

The back fence requires 6 panels to be replaced - Due date: Before Sunday, 17 December 2023

L - shaped colour bond fence raised by 500 mm (with pool style rails below to allow for water passage) and 2 small gates. - Due date: Flexible

Need to replace section of timber fence, supply and install new mist green colourbond metal fence . Around 11-12 meters straight length, side of home on road side. Removal of old fencing and take away old timber fence must include in price. - Due date: Flexible

Hi, my side gate has been sagging for a while now and I couldn’t afford to get it fixed. The fence has now unfortunately come off the hinges and fell. So looking at getting it repaired within a reasonable price as I cannot afford much. Thank you - Due date: Flexible

10m colorbond fence needs to be installed on a new property. No gate. - Due date: Flexible

Repair & Restoration Work 1. Provide colorbond fencing (surf mist) replacement with corner 65mm wide post (Bowral brown) : 2.4 meter long. 2. 5 Tilted C post to be removed and new 5 vertical post to be installed with existing material. This require concreate breaking via jackhammer in 5 holes and 3 core drilling. Total holes: 6 (Refer Image) - Due date: Flexible

Supply and install colorbond fence with 1 single gate. Height of Colorbond should be 1.8M. Length of site is 15.25m. Can be installed on the grass this side of trees! - Due date: Flexible

Repair & Restoration Work 1. Provide material and do brick work with pier crown installation 2. Acid washing of brick to make in alignment with rest of brick fencing 3. Provide custom build powder coated Aluminium slate to go between brick piers and installation 4. Provide colorbond fencing (surf mist) replacement with corner 65mm wide post (Bowral brown) 60cm deep into existing underground concreate base after cold drilling 5. Debris Clearance: Removal of existing fencing colorbond sheet, Post, and aluminium slates - Due date: Flexible

Need 1 post and 1 panel and broken piece drilled out from concrete driveways - Due date: Before Tuesday, 24 January 2023

Supply and install. Type: Colorbond Requirements: height 1.8m, length 10m Terrain: Flat ground

Approx 31m colour bond fence, standard 1.8m high needed to be supplied and installed. Also need one close off on one side and a side gate on the other side. Also, there is gentle slope from front to back. Also please quote the removal of the old timber fence. I understand prices vary so please provide indicative pricing if you can. - Due date: Flexible

I have some colour bond materials leftover and needs to be removed. I am looking for a person who can take it away for free. - Due date: Flexible

I need color bond fence and gate to be installed to the sides of the house. One side 1m width by standard height Otherside 3.5 width by standard height And one missing fence panel to be installed at the rear fence of the house. - Due date: Needs to be done on Friday, 10 June 2022

I need to do fencing around 20 meters. - Due date: Flexible

Help required cutting a sheet of colorbond and bolting it to a wooden frame to stop our dog jumping over the fence. I can assist but don't have the tools or know how to do this myself. I work from home so very flexible on when this can be done

Install lock for colour bond gate

Hi There, I need to get colorbond fencing done in backyard. Backyard Fencing (15.2 meter long) • Remove the existing fence and dispose off. • Install 2 treated pine sleeper (200mm wide) all along the length, also screw them to the post, • Where ever required cut slipper along the length to make horizontal level on sloping ground. • Fence Height: 1.8m, Install standard Colorbond fence (surf mist color). • Sleeper Height: 2 Sleepers, Height approx 40cm, • Slats Height: 60cm, Slat Color: Bowral Brown • Total Height: 2.8 Meter • Timber strengthening post in between to support slippers • Install 3 (alternate) 50mm by 50mm strengthening post. • Screw sleeper to C column and horizontal beam. • If required tree stump need to be cut. • Fill the generated gap between new fence and existing soil level with top soil (15-meter length, 90mm wide by 30mm deep) with wheel barrow. - Due date: Flexible

To raise the fence height on existing fence Attached pictures. There are 7 standard panels each measuring width of 2.4 m and height of 1.8m. Fence is bit sloppy(around 50 to 100mm) because of land slop. This to be adjusted so that fence will look at same height. This is the Job, 1) Remove the existing fence panels. No need to remove the fence posts. These to be reused. 2) put up one H4 pine sleeper of 2.4m * 200mm * 50mm for each post block 3) 3 of the panels may require to put additional 2.4m * 200mm * 50mm H4 sleepers to adjust to equivalent height 4) raise the height of fence post to 600mm 5) Reuse the same panels which are at 1.8m height and add additional panels to come up with equivalent height. This may require to cut the panels if no readily available at 600mm height. 6) The 3 panels which are going to up additional sleeper may require to put extension to longer.