Find skilled builders in Outer East Melbourne

I own a property in Ferntree Gully where we will be going some concrete and retaining walls. The property is on a slope. I need a survey done of the front of the house to produce a TIN model or a similar 3D model. The levels and slopes are what is important for me pls. I only need a survey of the front of the property, no need of boundaries, house or back of house. Area that needs survey is shown in the attached photo.

Assemble and erect 3x3metre Easyshed on existing concrete driveway. Discount code 354NKFEU for $30 off

I have already excavated most of the driveway area, but there is still some mud, roots and extra material that needs to be dug out and removed. The driveway area is approximately 48 m². Scope of work includes: * Further excavation of the driveway to the required depth * Remove mud, roots and loose material * Place and spread crushed rock over the driveway area * Spread soil in the upper garden area, approximately 14 m² * Remove and dispose of excavated rubbish/material * Estimated disposal volume is approximately 4–6 m³ I’m around 80% sure this can be completed with a Bobcat/skid steer, but you’re welcome to inspect the site before confirming if required. I expect this to be approximately half a day’s work with the right machine. Looking for someone available as soon as possible this week. Please mention what machinery you have and whether your offer includes rubbish disposal/tipping fees.

Job is to replace old external stairs (already removed). Possibly need stair landing replaced as well - keen to get some advice on this and quote for all suggested works. We've already purchased a set of timber stringers. Approximately 9-stair tread. Images show where original stairs attached to the house

6m x 3m Easyshed shed. To be assembled on timber subfloor

Looking for a quote to concrete my carport area so that two cars can be parked. The existing surface can be seen on the photo attached. There is a small section of crushed rock/ grid, exisiting concrete, and a small grass section, and I’m planning to remove exisitng surface (concrete + grid) under the carport and redo the area fresh. Total area is approximately 50 m². The job will include demo and removal, site preparation and compaction, and supply and installation of new plain concrete with steel mesh reinforcement. I’m after a durable finish suitable for vehicle use, with proper thickness. Site access is straightforward. Please provide your quote, availability, and details of previous similar work if available.

I had my driveway painted 7 years ago and needs doing again. Total sqm is about 370sqm which includes all footpaths and hardstand . I have put a price of 10 dollars a sqm Inc GST all I can say is I paid $9 a sqm in 2019, must be solvent based and two coats

repair driveway cracks and reseal whole drivway with coloured concrete sealer

I’m looking to install a pergola on my existing deck. The deck size is approximately 4470mm × 2420mm.

I need a 3x3m garden shed assembled. It is a 2 person job

Demolition of old brick letterbox. Removal of debris not required

Build new cross-over for a new construction to connect driveway to the street. Approx 3m wide and 4m deep

Need a handyman or shed installer to unpack and assemble a 1.5m*1.5m shed from Easy Shed. ASAP is preferred.

Pergola with single post and fascia install. 2 sides will be fascia mounted/fixed. I have the pegola already, dimension are 4160L x 1990 W. Added example of pergola type

Hi, I’m looking for someone to install my shed from easy shed on a recently poured slab. Shed dimensions: 2.25m x 2.25m x 2.0m high

Assembly + repair: 2x EasyShed - https://easyshed.com.au/products/flat-roof-garden-shed-1-5m-w-x-0-78m-d-classic?variant=44452584194207 - https://easyshed.com.au/products/flat-roof-garden-shed-2-25m-w-x-0-78m-d-classic?_pos=2&_fid=1abb19834&_ss=c We assembled the individual panels ourselves but need help with the structural assembly — putting the panels together to erect both sheds. Also need one door fixed on one of the Sheds — it's not closing properly, cause unknown, will need inspection on site. Location: Wantirna South, VIC 3152 Site: Gravel base, ready to go Tools: Please bring your own tools Instructions: I'll provide the EasyShed assembly manual People needed: Open — bring a mate if you think it's a 2-person job Timing: Flexible, this week or weekend Budget: $300? open to offers

Assemble 2 ABSCO Sheds on existing concrete - 1. Absco Sheds 3.0 x 1.52 x 2.08m https://www.bunnings.com.au/absco-sheds-3-0-x-1-52-x-2-08m-monument-space-saver-double-door-garden-shed_p0079540 2. Absco Sheds 3.0 x 3.0 x 2.06m. NOTE : Individual sheets - Roof, 2 Side and Rear is already assembled. Front (with Door) sheet to be done before final assembly of shed. https://www.bunnings.com.au/absco-sheds-3-0-x-3-0-x-2-06m-monument-premier-double-door-garden-shed_p0084389

Need help completing the installation of this gable roof EasyShed. The door and front door panel require assembly, and the shed needs to be installed on a grass surface using the supplied ground anchors. Happy to give hand for installation. Needs to get done on Tuesday morning.

Need qualified handyman to replace one heavily corroded square steel post supporting my backyard patio/pergola roof. Safely supporting the roof while removing the old rusted post. Installing a new metal post that won't rust again at the base. Please provide guidance to avoid future rusting.

Install a 2.5m x 3.5 m approx pergola in backyard colorbond with timber, flashings, guttering, painting, and lighting? TBC Cost - asking for quotes - inspection