Find a professional bricklayer in WA

Lay a pile of bricks down the side of a house! There is sand but would need to be flattened and cleaned before laying the bricks

Build up once course of bricks into a pre existing wall

Pool paver has come loose and need to be re-cemented in

Need a wall bricked up where a large widow is to put a smaller bathroom window in. Need mortar replaced around the house in a lot of areas to about waist height where it has been deteriorating.

I am removing the existing window and make the opening smaller. I want to lay bricka to fill the gap 1.8 m wide and 350mm high brick work.

I need to finish off a curved wall at the back of my house. I need about 20 limestone bricks to be professionally laid to complete the wall. I will have all the limestone bricks and cement available. You will need equipment and experience to continue the wall using the same mortar joints.

Needing a curved wall and a boundary wall finished off, about 250 bricks to be laid total. I have bricks, sand and cement ready to go.

multiple bricks needs patched to look as close to normal as possible or replaced, Materials need supplied

Render Brick Wall Length is 30m and height is 1.8m

Aggregate cementing for undercover area aprox 30m2 currently paving.

6 brick pavers have come loose on the back steps as seen in photos. We’ve got the 6 bricks and just need someone with the knowledge, tools and materials to cement them back in

Laying 35sqm of travertine pavers, herringbone pattern. Must have experience

I am looking for someone to brick up a window on a double brick wall

There is a wall fence to be done by bricks with 5 columns ; the length is 12m and height is 1.85m

Brick paving to the side of the house 27sqm. Pavers supplied just need laying

3.7 m long by 8 courses high. Footings done, bricks sand and cement provided

Build a brick wall using recycled bricks 2 meters high and 30 meters long. Job to include trenching, formwork and concrete for the footings to support the above. Recycled bricks also supplied as part of the job. Trees and fencing will be removed by owner in advance. The lot is level.

Mortar in 2 400mmx400mm pavers to make step. Mortar provided

Redoing the brick paving to accommodate the newly installed gate track. Need to raise level so that car won’t impact track when it drives over it. I started the job to replace one side up to the newly installed gate track and whilst I think I did a decent job on the first side I think someone else will be able to do the other side quicker and better than me! May seek an opinion on whether first side has been done sufficiently and consider getting it redone In summary - Pull back a couple more rows of bricks on side that needs the most raising (so that there isn’t a steep ramp) - Add and spread sand (I have 2.5 bags which is hopefully enough but maybe some other base also recommended) to raise level up to above gate track (allowing for settling) and level with other side - Compact - Re-lay bricks with original pattern -Fill cracks with paving sand (I have 1.5bags) This is for labour only but if other products recommended will purchase. It is my best guess based on how long the first side took me on assumption someone with experience in paving and right equipment will be able to do it in 2-3hrs but open to negotiation on that or paying more if it turns out to be a bigger job than I’ve explained

Same as title i need bullnose and paving done