Find a professional bricklayer in Inner South West Sydney

I have approximately 10 loose bricks on a 1950s double brick house. The bricks need to be removed, all old mortar cleaned out, and the bricks relaid with new mortar. Please include repointing around the repaired area if required

Bricklayer Required – Hurstville Grove Looking for an experienced bricklayer to make a curve seat. All bricks will be supplied. Bricklayer to supply mortar and all tools/equipment. Curved Brick Seat Build a curved brick garden seat similar to the existing seat in our backyard (photo included). Approximately 200 bricks. Approximately 2.4 m long, 360 mm wide (3 bricks deep) and approximately 400–450 mm high (6 courses). Seat will be rendered after construction, so standard brickwork finish is acceptable. Construct using mortar on a suitable footing (it is just dirt at the moment, our rear seat was constructed on a mortar bed). Location: Hurstville Grove, NSW

Repair loose bricks Point cracks Come whenever You bring grey cement and white brickies sand

Removing door/jam and bricking up 2 standard doorways. One is external double brick ( will need red bricks on external ) and one is interior. Internal render of the bricked up doorway would be great if skilled. Going rate of bricklayer to be paid.

Have a front fence about 27 meters long

Need this part of brick fence repaired + Had a mailbox attached to it. Preferably fix with the old bricks but may need to purchase some new bricks (some got cut in half)

Two columns floor to ceiling / also some other footing and brick work at later date

Brickwork for waranda and pillars

I need 6 bricks to be put back into the whole of the wall of the house.

It’s an old fence, but we just want to build it back up to where it was using the same type of bricks. I can help source them and might even be able to reuse some I’ve got at home. Price can be discussed.

Looking for an experienced bricklayer, concretor, or skilled handyman to extend and level an existing concrete block base at a property in Hurstville. Current Base: Approximately 23 cm wide. Target Dimensions: Extend to 37 cm x 70 cm with a depth of around 30 cm. (photo attached) Leveling & Bonding: The new concrete will be strongly bonded with existing structure. The existing concrete is sloped. You will need to level the surface, apply a high-strength bonding agent, and pour a new concrete layer to ensure it fuses strongly with the existing structure. Requirement: The final base must be perfectly level, solid, and structurally sound to safely support heavy equipment (a solar battery). Materials & Tools: You will need to supply all required tools and materials (concrete mix, bonding agent, formwork, etc.) Please send a brief message outlining your experience with similar concrete or structural work and your availability

Want to widen my driveway entrance. And install the brick pillar and letter box again.wall is 2ft tall

Hi looking for someone for a bricky to infill 4 spots. see photos attached. I’ve got the bricks on site to use. also have mortar mix bags available to use too. probably will need to byo ladder and trowel in case mines on another site. thanks

I need bricklayer with experience From $350 to $550 depends ur experience

need an experienced builder, bricklayer, window installer or handyman to inspect an existing brick wall and compare it against my architectural plan. The job is to: * Check the existing brick wall on site * Confirm the wall/opening dimensions against the plan * Advise whether the brickwork matches the drawing and what needs to be changed * Measure accurately before I order any window/door/joinery * Let me know if the brick wall can be cut/modified safely Work will be possible according to how this task goes. Will be looking for installation later on The wall is existing face brick. I need someone practical who can tell me what is actually possible on site, not just read the plan. Please only apply if you have experience with brickwork, window/door openings, structural walls, or renovation work. Location: [revesby ] Please bring your own measuring tools. Photos and plan can be provided before the job.

Looking for an experienced bricklayer to brick up an external opening in a double brick wall. Scope: Infill opening approx. 850mm wide × 2060mm high Double leaf brickwork (external wall) Tie new brickwork into existing wall on both sides Match existing brick bond, colour, and mortar joints as close as possible Finish both faces neatly (external face most important) Clean up site after completion Materials: Bricks supplied by me You to supply mortar, wall ties, and sundries Access: Ground floor, easy access See attached photo for reference (existing opening under lintel) Location:
Sydney Budget:
$900–$1,200 (open to offers for quality work) Timing:
Flexible, but prefer completion within ~1 day Notes: Experience with face brick matching essential Please include examples/photos of similar work Must bring own tools

Dismantling brick front fence & cleaning lime mortar bricks to reuse - using your tools remove bricks from front fence - clean lime mortar from bricks, for bricks to be re-used - I'm confident mortar is lime, if we find it is concrete this work will not be possible - stack bricks neatly on property - If you have a Arbortech Brick And Mortar tool or similar that would be ideal

465 Bricks Layed Into Existing Window Frames + Toothing Supply & Install Commons

Need approximately 5 rows of brick on a lintel connecting the two columns (2.8m across ). Bricks and sand and cement already on site (all materials on site

We need our front brick pathway repaired so there aren’t any trip hazards. We don’t need the whole path repaired and only the small section shown marked in red. Likely need to rip up the bricks and fix underneath them so they sit flush and not sticking up from the ground. Thanks