Home/
Jobs/
Carpentry/
Outer East Melbourne

Carpentry Jobs in Outer East Melbourne

Browse through over 500 Carpentry Jobs.

See what you could earn

$0

per month

Based on average carpentry task prices. Actual marketplace earnings may vary

Why join Airtasker

Join Airtasker

Carpentry tasks in Outer East Melbourne

Check out what tasks people want done near you right now...

Looking for a skilled carpenter or handy maker to design and construct a lightweight, modular pine-look display system for a market stall. The entire system must be easy to transport and require minimal-to-no tools for assembly (ideally pieces slot together). 1. Modular Pegboard Wall (~2.8m W x 50cm H) Purpose: To hang individual products using small dowels, or to mount the grid display box (Item 2). Transport: Must be modular/split into sections to fit inside or on the roof racks of a Mitsubishi Outlander (waterproofed if transport is external). Setup: Needs free-standing, weight-bearing legs with waterproof feet for outdoor use. Can also attach to marquee legs for stability. Clearance: Designed to sit nicely above a 1.23m high display table under a 2m marquee eave. Portability: Must be lightweight enough for easy lifting by one or two people. 2. Wooden Grid Display Box (3 x 4 Grid) Purpose: To showcase twelve 8cm diameter baubles. Mounting: Must attach securely to the pegboard wall (e.g., using dowels on the back that slot into the pegboard holes) or flat on a table. Protection: Features a layer of red velvet cushioning on the back panel to prevent breakage. Safety: Consider a clear Perspex sheet that slots into the front (or small individual hooks) to secure the baubles when vertical or during transport. Bonus: Stackable/tessellating design for easy storage. Key Requirements: Material: Lightweight timber/plywood with a clean pine aesthetic, red velvet, and clear Perspex. Please provide a quote including estimated material costs and examples of any previous custom display or woodworking projects you've completed! Budget is flexible, please provide your best offer

Wed Jun 24 2026

about 1 hour ago

Open

Need to restore, patch and prep timber fascia ready for painting. Rotten patches of timber to be replaced or filled/hardened etc. To restore shape and make look like new once painted

Ashwood VIC 3147, Australia

Wed Jun 24 2026

about 1 hour ago

Open

I recently had a fireplace removed, need to patch up the area - mainly the wall as I will have a floor person do the full floor. But it would help to add in the timber support in the floor if needed.

Mount Waverley VIC 3149, Australia

Wed Jun 24 2026

about 1 hour ago

Open

I need the cabinet draw facia board attached and handles added

Cranbourne East VIC 3977, Australia

Wed Jun 24 2026

about 2 hours ago

Open

Custom Cabinet Maker Required – Walk-in Robe & Laundry Storage Design and Installation Job Description Looking for an experienced cabinet maker/joiner to design, build and install: 1. Walk-in robe with a combination of drawers, shelving and hanging space. 2. Laundry storage cupboard approximately 135cm wide x 62cm deep with shelving, hanging/storage section and closed cabinetry. Seeking someone who can: * Visit site and measure * Provide design suggestions * Supply materials * Build and install * Share photos of similar projects completed Please include: * Examples of previous cabinetry/wardrobe work * Estimated timeframe * Approximate budget range

Vermont VIC 3133, Australia

Tue Jun 23 2026

about 5 hours ago

Open

Just need some small stair treads made out of jarrah for a lift stair case 10 steps approx 450mm buy 70mm by 20mm thick. Can be thinner also maybe out of decking I can buy the wood nothing flash just need edges routed and I don’t own router

Tue Jun 23 2026

about 16 hours ago

Open

CARPENTER NEEDED — internal wall frame, plasterboard, insulation + pre-hung door install (supply and install) Looking for an experienced carpenter to supply all materials and build one internal partition wall from scratch, including a pre-hung door. This is a full supply-and-install job. Please provide an itemised quote — **materials and labour separately**. ________________________________________ Scope of Work: 1. Wall Frame • One internal stud wall: 3.65m wide × 2.45m high • 70×35mm MGP10 pine framing • Studs at 450mm centres • Top plate, bottom plate, and noggins included • Wall spans full width of room, fixed to existing walls both ends • Ground floor is timber flooring 2. Door Rough-In • Frame door opening to suit 820mm × 2040mm pre-hung internal door set • King studs, jack studs, and header to standard spec • Carpenter to calculate exact rough opening dimensions based on pre-hung unit specs • Install Bunnings Hume 2040 × 820 LH pre-hung door set (door leaf, jamb, and stop) • Fit architrave both sides • Door to open, close, and latch correctly upon completion 3. Insulation • Fit Earthwool SoundShield R2.5 wall batts within stud cavity prior to boarding 4. Plasterboard • Both sides lined with 10mm CSR Gyprock (2700×1200mm sheets) • Cut and fit around door opening, screw fixed at correct centres • Board only — no taping, setting, or plastering required 5. Cornice • 55mm CSR Gyprock cove cornice both sides of new wall, adhesive fixed ________________________________________ What is NOT in scope: • Taping, plastering, or painting • Any electrical or structural work • Anything not listed above Budget $1000 to $1200. Itemised quotes only — materials and labour listed separately. If your quote exceeds this range, please explain what drives the difference. To Apply: Briefly describe your experience with internal wall framing and door hanging. No generalists please.

Mont Albert North VIC 3129, Australia

Tue Jun 23 2026

about 23 hours ago

Open

Need handy person with wood. Make controller board from 12 mm wood. Refer pics. Happy them get materials or l buy them. Take about hour would say. Need drill, drills bits, whole drill bit different sizes. Need board 1200mm l X 700 mm w. Table hole grommet X 10., screws, spacer about 30 from board to cabinet. Where the white containers are where board go. Need spacer for cords

Cranbourne VIC 3977, Australia

Mon Jun 22 2026

1 day ago

Open

I’m looking for a carpenter/cabinet maker to build and install a custom TV feature wall similar to the attached photo. The design includes a floating TV cabinet, timber slat wall panels, decorative shelves, a stone-look feature panel, and integrated LED strip lighting. I’d like a site inspection, custom design, supply, and installation quote.

Doncaster VIC 3108, Australia

Mon Jun 22 2026

1 day ago

Open

Browse all tasks

Last updated on 24th Jun 2026

Discover your earning potential in Outer East Melbourne

Earn money with every carpentry task

$520

per week

1-2 tasks per week

$1,300

per week

3-5 tasks per week

$1,820+

per week

5+ tasks per week

$2,252

per month

1-2 tasks per week

$5,629

per month

3-5 tasks per week

$7,881+

per month

5+ tasks per week

$27,040

per year

1-2 tasks per week

$67,600

per year

3-5 tasks per week

$94,640+

per year

5+ tasks per week

*Based on average carpentry task prices in Outer East Melbourne. Actual marketplace earnings may vary

Join Airtasker

Unlock new income opportunities in Outer East Melbourne

Explore carpentry related jobs and discover your financial opportunities

Type of carpentry job	1-2 tasks/week	3-5 tasks/week	5+ tasks/week
Carpentry	$520	$1,300	$1,820
Staining	$1,100	$2,750	$3,850
Cabinet Making	$258	$645	$903
Kitchen Cabinet Maker	$942	$2,355	$3,297
Cabinet Installation	$660	$1,650	$2,310

*Based on average carpentry task prices in Outer East Melbourne. Actual marketplace earnings may vary

How to earn money on Airtasker

Job opportunities that find you

Set up notifications and be alerted when a nearby, well-matched job is posted. Let customers book you directly by setting up a listing. Provide a great service and work with them again with Contacts.

Set your price

Found a job you’re up for? Set your price and make an offer. You can adjust and discuss it later if you need to.

Work. Get paid. Quickly.

When tasks are complete, request for payment to be released and money will appear in your account instantly.

Post a task

Get Inspired: Top Carpentry Taskers in Outer East Melbourne

meet
David H
11 years on Airtasker
- Scoresby VIC
5
Overall rating
1373 reviews
99.93%
Completion rate
The percentage of tasks successfully completed by the Tasker
1476 tasks
meet
Tim S
11 years on Airtasker
- Narre Warren VIC
5
Overall rating
286 reviews
99.7%
Completion rate
The percentage of tasks successfully completed by the Tasker
333 tasks
meet
Kevin W
10 years on Airtasker
- Narre Warren VIC
4.9
Overall rating
62 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
70 tasks
meet
Phillip T
8 years on Airtasker
- Thornbury VIC
5
Overall rating
263 reviews
99.66%
Completion rate
The percentage of tasks successfully completed by the Tasker
293 tasks
meet
Shaun B
8 years on Airtasker
- Yarra Junction VIC
5
Overall rating
30 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
32 tasks
meet
Matt H
8 years on Airtasker
- St. Helena VIC
4.8
Overall rating
24 reviews
89.66%
Completion rate
The percentage of tasks successfully completed by the Tasker
29 tasks
meet
David L
3 years on Airtasker
- Vermont VIC
4.7
Overall rating
69 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
91 tasks
meet
Michael L
2 years on Airtasker
- Wheelers Hill VIC
4.9
Overall rating
37 reviews
96.3%
Completion rate
The percentage of tasks successfully completed by the Tasker
54 tasks