Find trusted glazing experts in Melbourne

Need a qualified, licensed glazier to replace 2 x glass panels in an internal timber door. Rough measurements: 1. 37 x 38.5cm 2. 39 x 9.5cm The replacement glass must comply with Australian Safety Standards (AS 1288) Must provide a formal tax invoice/receipt stating compliance upon completion (required for real estate agent).

I have two maybe three crystal cabinets that require glass cut, I all ready have most of the glass. Need to cut about 10 pieces

I have a 120cm W x 166cm H x 12cm window that requires double glazing for a recording studio. There is an existing sliding window but this can be blocked off.

Glazier - Need Cabinet Glass Re-fitted Looking for someone to refit the glass panel in one of our display cabinets. The glass has slipped out at the bottom, mainly on the left-hand side, and needs to be repositioned and secured. Please see the attached photos. The glass is approximately 930mm x 1615mm.

I already have: All 10mm toughened glass panels Detailed drawings with dimensions I need an experienced glazier to: Remove and dispose of the existing glass display UV bond the new glass panels together Ensure all joints are square, aligned and clean Install the completed glass display onto my existing stainless steel counter using clear silicone if required Please bring your own professional equipment, including a UV lamp, UV adhesive, glass suction lifters, 90° glass clamps/alignment tools, and any other tools required to complete the job. This is for a commercial restaurant in Melbourne CBD. Please only apply if you have experience with UV glass bonding and can show previous similar work.

Need someone to repair glass 1080x540 daylight size

Hi, I'm looking for a quote to replace a cracked upper window glass in Prahran. The glass is approximately 61 cm high × 45 cm wide. The window is in a ground-floor apartment and has a timber frame. The existing glass is obscure (frosted/textured) glass, and there is an existing vent installed through the glass. I'd like to replace the glass only and keep/reinstall the existing vent if possible. I've attached photos. Thanks,

Hi, I'd like a quote to replace the upper window glass and reinstall the existing vent. I've attached photos. Matching glass required. Apartament on the ground floor Thanks

I need double glazing or a solution for this bedroom glass to help reduce noise and help with heat retention. Open to suggestions for full frame replacement or double glazing if suitable.

Need to replace a small glass panel in a set on internal french doors. Located in Sassafras. ASAP preferable as have little kids.

I am looking for an experienced glazier to modify an existing bathroom window in an older brick apartment to allow installation of a bathroom exhaust fan. Existing Conditions: * Small bathroom with existing aluminium-framed window. * No current mechanical exhaust fan. * Apartment experiences significant condensation after showering. * Window reveal has been opened for inspection and photos are attached. Scope of Works: * Inspect existing window and confirm suitable installation method. * Supply and install replacement glass panel with cut-out for exhaust fan OR recommend alternative glazing solution. * Ensure installation is weatherproof and suitable for bathroom use. * Coordinate fan opening size with electrician if required. * Remove and dispose of any redundant glass. * Make good seals around window and new glass panel. Please Provide: 1. Fixed price quotation. 2. Recommended fan opening size. 3. Confirmation whether toughened safety glass is required. 4. Earliest availability. 5. Examples of similar work completed. Photos attached.

We require a glass cutter to be mounted onto the wall in our studio. The wall it drywall, there are no studs, and just concrete/brick underneath, so it will need long masonry screws for it to go through the plaster and well into the brick wall behind. The mortar seems pretty soft in some areas so we just want someone who will be able to do this properly as it’s a heavy item (approximately 25-30kg) and there will be someone to help also. We have all the fixings and braces ready to go, it just requires holding and drilling in to make secure. Expect it to take no longer than an hour I hope!

I'm a learning glazier, just want someone to teach me how to better quote and learn new jobs, only work is just watching me work and explaining me better tricks to the trade, around 5-10 hours a week at $25 an hour, preferably someone from Thornbury or surrounding areas

Looking for an experienced glazier in Melbourne (Essendon) to supply and install glass into existing kitchen display cabinet doors. Details: • 2 existing black framed cabinet doors • Approx 2000mm high x 400mm wide each (final measure to be confirmed onsite) • One full clear glass panel required behind each existing frame • Looking for a premium finish suitable for a high-end kitchen display cabinet • Open to fluted/reeded look via applied film if available Quote can be separated by labour and materials. Overall quote to have • Supply of all materials • Site measure • Labour / installation • Any required fittings/adhesives • Lead time Photos attached. Please only respond if you have experience with custom cabinet glass installation.

Hi looking for glazier to replace this window we have in our toilet. The window we currently have is partially open at all times to provide passive ventilation (but I've stuck a mesh tape at the moment over the open areas). As we are installing a ceiling exhaust fan I need this window replaced so that it is completely sealed from the outside with no openings. I am looking for someone to come and have a look in person and provide a free quote. Thanks

Hi I’m a house painters my guys made bit of glass scratchers around window frames need someone to come fix it around 5 scratchers should take no longer hour or 2

Hello, glazier needed to measure, supply and install 2 x glass panels below - please share quote thanks: 1) Display cabinet: glass panel measuring approximately 1200mm x 415mm (attached picture with red outline also included pic to show how the glass is held in) 2) Toilet: Obscure glass panel measuring approximately 750mm x 450mm (assume will be satinlite type glass based on the attached picture) Only need to replace glass panel as not using the fan in the picture.

Broken window approx 920mm x 520mm. Don’t need double glazing or anything.

Hello I’m looking for someone to come and measure and install shower glass in my new bathroom.

Have a damaged glass on a door. Need to cut new glass to replace. Supply glass only