Hire a trusted wall mounting service near you

Need help hanging 2 pictures and 1 mirror on the wall. * Hammer and screws already provided * Each item is up to approx. 90cm x 90cm * Each picture likely only needs 2 screws * Straightforward and easy task — just need an extra pair of hands to help mount them neatly Looking for someone experienced with wall mounting/picture hanging. Flexible with timing.

Hang several painting and mirrors on wall

hang a mirror, small paintings and small desk to the wall ☆ no drilling needed, hooks (appropriate to the weight and size of the item) will be provided. My price is fixed as it wouldnt take more than 30 to 45 mins max so consider reading this carefully before sending me your offer

Identify in new build best place to hang each photo frame (say 30) and paintings (approx. 10). Then secure safely to the wall. Please provide tools required.

Need someone to hang a medium arched 80x60 wall mirror securely in my apartment/home. Must have own tools and experience hanging mirrors/artwork. Located in Miranda Please send quote and availability.

Large round mirror 27 kg on wall.

Install 2 x shelves. The shelves came with 2 wooden brackets to mount on the wall however would prefer them to be floating if that’s possible. I have provided a photo of where the shelves would go

I need a professional handyman to install shelves in my linen cupboard. Measurements are roughly 140cm wide and 32 deep. Must have a registered ABN and proof of insurance. Thanks

I need neat job drilling around 10 holes into brick and plaster walls. You'll need a power drill with masonry bit, and supply plastic plugs for screws/ hooks.

Hi there, I’m looking for someone to hang four pictures around our house, as well as install some wall coat hooks. I’ve attached photos of everything below. We’re based in a terrace house in Surry Hills, and all walls are brick. Thanks so much!

I need a few frames hung in my home - metal framed round mirror 900mm wide on gypock wall - light wooden frame on concrete wall - two small-med light wooden frames on concrete wall - one light square wooden frame 1m width on gyprock wall

Please hang mirror in hallway. Approx 90 x 70 Has two areas on back of it for mirror to hook into.

Hang a number of framed pictures on walls. A few on plaster over brick walls, rest on gyprock and study walls. Have some fittings. May need to supply others.

We are not sure how to drill the brick wall in bathroom without damaging the brick. So need a professional to come in and drill the wall to hang mirror for us.

Looking for a handyman to securely mount a wall mirror and an IKEA photo ledge. ​📋 Job Details: ​Item 1: 1x Mirror (80 cm). ​Item 2: 1x IKEA Photo Ledge (see pictures for reference). ​Wall Type: Plasterboard ​Location: Hoppers crossing

Need a licensed sparky to install a Shelly Pro 3EM-3CT 63 (3-phase energy monitor) into my residential switchboard this Saturday. The job: Install 3 × split-core CT clamps around the 3-phase mains cables between the meter output and main switch Mount the Shelly Pro 3EM unit (DIN rail or adjacent) Wire a 240V AC feed to power the unit (from a spare MCB or existing circuit) Verify it powers up and CTs are reading What you DON'T need to touch: The Endeavour Energy revenue meter (Elster A1100), sealed, stays as is Service fuses Solar inverter or array wiring Any existing circuits What's already here: 3-phase board, dual supply (grid + rooftop solar) Elster A1100 meter, Endeavour Energy network Tenby Cables switchboard, Left + Right modules The Shelly unit and all 3 CT clamps — I have everything, just need it installed I'll provide: Full installation guide with wiring diagram (already prepared) Photos of the switchboard for your reference (attached) The Shelly Pro 3EM unit + 3 CT clamps (all supplied) You'll need to bring: Short length of 35mm DIN rail if there's no spare space on the existing rail (board looks fairly full, may need to mount a small rail segment on the back panel) 1 × MCB (6A or 10A) to protect the Shelly's 240V power feed Short lengths of wire for the 240V feed (L + N to the unit) Location: Kellyville Ridge, NSW When: This Saturday — flexible on time, morning or afternoon Budget: $150 – $200 This is a straightforward install, no modifications to existing wiring, no meter work, just clamp-on CTs and a small monitoring unit. Should take 30-45 minutes for anyone familiar with switchboard work. Must hold a current NSW electrical licence. Happy to see your licence number before confirming. Cheers!

I have a 600x235 shelf kit from Bunnings that I need installing in my laundry room for the NBN installation. I am available today (14 May) Monday, Tuesday (18/19 May) or Wednesday 20 May before 1:00pm.

Need someone experienced to safely hang a large arched mirror on an internal wall in Moorabbin ASAP. Mirror is already here. It has a hanging plate on the back and warning says not to hang with wire. Needs to be hung properly with 2 hooks or appropriate heavy-duty wall fixings. Please bring your own tools and fixings, and check wall/stud suitability before hanging. Location: Moorabbin

Hang 6 picture frames. 25mm between each picture. Everything provided (screws, tools).