Find a professional chainsawing services in VIC

I have approximately 7 large hardwood rounds/logs left over from a tree that was cut down. They are roughly 60cm in diameter and 35cm high, although sizes vary. I need someone with their own chainsaw and appropriate experience/PPE to cut the rounds down into smaller, fireplace-sized pieces suitable for use as firewood. What I need: Bring your own chainsaw and equipment Cut the existing logs/rounds into manageable fireplace-sized pieces The timber is hardwood and some pieces are quite substantial I will be present to move, carry and stack all of the cut timber, so you won't need to do the heavy lifting or stacking No tree removal or stump grinding required as the tree has already been cut down There are approximately 7 rounds in total, as shown in the photos. Ideally looking for someone who is experienced with chainsaw work and can complete the job safely and efficiently.

Remove branch, chainsaw into logs ready for axing and remove mulch

Cherry tree two overgrown

Fuel line has split to my chainsaw. I dont have time to fix it as it need to be pulled apart I think it's the line from tank to engine. Not primer to tank.

Chainsaw service Type of gardening: Other Size of garden: Under 50m² Has green waste bin: Yes

I require someone with a chainsaw to cut up two timber logs in pieces. Each log is approximately 2.5 meters in length.

I need someone to chainsaw off a bit of my stump. I don’t have my chainsaw anymore. This won’t take long, you don’t need to fully remove it

There are two trees that require cutting back and all cuttings to be taken away. Located in Dromana with substantial driveway access. One is a palm that is growing over the garage roof, and need one trunk removed as circled including the fronds that have landed on the garage roof. The other is a native that is starting to push on the fence and overtake the garden, two main trunks on this one plus foliage. I would need completed by 12pm Monday please. All is within reach standing on the ground.

Cut small section of tree stump with a chainsaw down to ground level. Section remains after stump grinding as close proximity to fence. Location is West Melbourne, 3003. Near North Melbourne train station.

Need three big wooden posts cut at the base with chainsaw and taken away as well. Very quick job.

Looking for someone with a chainsaw to remove the remaining section of a tree at the front of my house. Access is very easy directly from the footpath. Job requirements: ☑️ Cut the tree down as low to the ground as possible, leaving the stump. ☑️ Cut several grooves into the top of the stump so I can apply herbicide to prevent regrowth. ☑️ Please take care around several small tube stock native plants that I’ve recently planted around the base. Happy for quotes either: 1. Including green waste removal, or 2. Without green waste removal (I can organise disposal separately). The work can be done anytime. 📏 For sizing, I measured around the widest part of the trunk at the base and the circumference is approximately 1.1 metres. That equates to roughly 35 cm diameter. Photos attached. Please quote and let me know whether green waste removal is included.

A few large palms have fallen in my yard and one more I want cut down . Also some dead fronds I can’t reach . Need these chopped up with a chainsaw

There is a remaining piece of a tree trunk that needs to be chain sawed to more manageable pieces.

3 tree trunks to be chainsaw as far down as possible

Service my ride on mower (has power surges at times) and stilhl chain saw

Two three branches chopped down Cut up into smaller sizes Placed in green waste skip provided by owner A further branch requiring ladder would be desirable but not essential for this task

To service my McCulloch chainsaw

4 stumps need cut to ground level. Only need cutting no removalstraight out cut to or just below ground level.

Pull out small bushes and remove stumps

I want the tree stumps cut up. I'm planting new trees in the spot. Tree root is about 6 years old with no life. About 70 cm long. Tree stump is dead about 5 years ago. I want it cut up so I can plant a new tree. There is no access for a stump grinding machine. Chain saw is ok