Find professional tv installation & setup technicians in NSW

Tv installed on wall bracket provided

Hi , I am looking for an expert to do CCTV install and configure . 4 CCTV (2 in the front and 2 in the backside ) . Wires are already in place - cat6 . I have the owlview cctv , nvr and harddisk .Same with wifi mesh wires are already in place . Need to screw the wifi mesh to ceiling .

Install tv in my Toyota haice 2022 model

Install 50 inch tv on corner wall

I need to install the TV table but it seems to me I have a problem to do it my self also I have microwave stand as well and I have the same problem

Need someone to install a tv on the wall

we need 4 wall brackets and 4 50 inch TV's installed on the wall

I have a Tv unit, a shoe stand and a coffee table

Install a TV Wall Mount on plasterboard wall

TV delivered this morning. Need assistance unboxing and setting up a new 65-inch LG OLED TV. TV is already in room. Task includes unpacking, attaching stand, lifting onto TV cabinet. No wall mounting required. Estimated 30 minutes. I’m happy to assist.

Cut open existing plasterboard wall and install some plywood or timber bracing to take the weight of the tv. Reinstate Gyprock and install tv bracket above fireplace

Install tv wall mount on bedroom

Mostly just drilling holes in the wall

I need my TV mounted on a brick wall. The TV size is 65 inches and is a TCL

Need tv mounted to wall 75” Plus a 40” tv mounted to another wall Both need brackets

Reset Dahua cctv cameras (set of 4) plus setup online feed on mobile

Install bracket and tv on wall, relocate wall mounted mirror from one wall to other wall

Needing someone who is experienced in installing TVs onto the wall bonus if you can also provide the correct bracket. TV is 85 inches.

Job 1 / Paddington Unscrew TV bracket from premises 1 & patch holes + patch 10-12 screw holes from art work. Job 2/Lilyfield Deliver TV bracket & re-install TV + drill new holes for art work Lilyfield) & hang 5-6 pieces of art the TV is already at location 2** Total 1 hour at each location.

Adding a bit more detail to the job. We have an existing 5 camera set CCTV set up in small shop space. Running off a VIP Vision NVR8PRO7. Cameras are Dahua turret cameras. 1. One camera has stopped transmitting. So need someone to check the configuration set up on the NVR etc . If it turns out to be a camera hardware issue we will just need it configured ready for a new camera to be plugged in (obtaining and installing the new camera not part of this job). 2. A new camera needs to be installed. Need a small hole drilled through plasterboard alongside the airconditioner (see photo showing white and orange wall) similar to what has been done to Sensibo aircon controller as shown on the picture. Cat cable can be run directly from that wall to the NVR (approx distance only 2-3 metres). Note that the large number of blue cables into the switch in the photos is for our payment gateway machines (nothing to do with NVR/cameras). The NVR is the box sitting under the switch in those photos. So need someone with (i) ladder, (ii) hole drill and (iii) knowledge of CCTV systems that can hook up new camera (and work out what the issue is with camera not working). Would expect it might only take an hour to complete.