Find a professional garage door installer in Canberra

Need to do setup on the phone & remote at present only operate from the. Controller

Job Description: My automatic garage door has two main issues that need urgent repair: • Door not holding open: • When the door is fully opened, it does not stay in position. • The chain mechanism seems unable to hold the door, causing the door to drop unexpectedly from the open position (potentially dangerous). • Closing issue: • When trying to close the door, it sometimes comes down only about one-third of the way and then reverses back to the fully open position. I have attached a photo of the door’s chain and release mechanism for reference. Task Requirements: • Diagnose the fault with the garage door opener, chain, and track mechanism. • Repair or replace any faulty parts (e.g., chain drive, trolley, carriage, limit switch, or sensors). • Ensure the garage door opens and closes smoothly and safely, holding its position at the top without dropping. • Test safety features and confirm the door operates correctly after repair.

Install a single garage door opener on a roller door garage On right hand side, 45mm gap between curtain and holder as the opener requires https://www.bunnings.com.au/chamberlain-rollerlift-roller-garage-door-opener_p0133219

My garage door and rollers are a bit bent out of shape. I need some help getting it all back into working order

My automatic garage door not opens fully up and not close properly. When pressing the close button on the remote, the door starts rolling down but then the roller wheel misaligns when coming down and sit outside the track. It looks like the issue is coming from the left corner roller area, which may be due to misaligned. The corner panel also appears slightly misshaped, likely causing the door to bind. Please see the attached photo for reference. Work required: Inspect the corner roller and alignment. Adjust or replace the roller if necessary. Check and realign the corner panel. Ensure smooth and safe operation of the door after repair.

Our garage door has a dent & scratch on it. When reversing a car, the bull bar dragged on the door. The dent & scratch is approx 1 meter long & 20cm high. We are hoping someone can push out the dent and repaint the scratch.

Install 1x single panel lift door, brand new supplied

Electric garage door is off the rail

The wire that connects the handle of my garage door to the latch has snapped. I think it can be repaired with a new piece of wire attached to the existing wire but I don't have the wire, joiners or capability.

a small bent happened at the end of garage door rail

There is a dent on one of the sections of a garage door strut, this dent needs to be fixed.

Warehouse door needs fixing, alignment lose when the driver hit the Strings. Very easy fix though i just cant do it myself

I have chamberlains garage door opener and I want someone to install and run perfectly.

Looking for a someone to spray paint garage door.

Having issues with the garage door (most probably a motor issue) and requires manual assistance for openning and closing

The property is an old townhouse with motor garage door, can not open suddenly.

Remove and dispose of wooden panelling and plasterboard from inside garage and from garage opening (where roller doors would be).

I need to do re programming my garage door herculift company

The motor fpr the garage door has reached it end of life and needs change.

Could someone please fix my garage door?