Find a sockets and switches installation professional in Inner South Melbourne

1. Replace 3x light switches with dimmer switches (I have the parts) 2. House has a dorani doorbell/intercom that I want to replace with a battery camera doorbell. I want the existing wiring to be safely capped off so I can use the new doorbell, but the original system can be reinstalled if I choose.

Have a number of switches that pertain to the backyard lights and the front yard lights. There are approximately six switches. Need someone who can help me automate them so that the lights come on at a certain time rather than having to turn them on manually every evening and then turn them off . This requires supplying and installing the right Shelly smart switches. Please quote for installation and supply. There are four switches in one spot and another two in another.

Swap 10 PowerPoints and 4 light switches. Supplied

Need an electrician to connect the induction cooktop and fixing the switches with no power

need to get a lamp shade put on and 3 plug sockets installed in the house

Replace 4 power sockets: 3 in bedrooms and 1 under the kitchen sinks. I have the power sockets. The sockets are in the picture.

We need new light connected in an ensuite bathroom and 5 x single and 2x double light switches changed. All items have been bought and are ready to install. This needs to be done be quickly for upcoming auction. Location is Malvern East.

Need 4 light switches changed and 2 light fittings changed Light switches aren’t working Need general electrical check also

We need two double outdoor sockets to connect a pool pump, chlorinator and LED lights. There is a power point on the perpendicular wall that we got disconnected recently marked in the photo Need to get the pool heater hardwired. 3KW 12A power draw. The pool builders have left a conduit that needs earthing. Need supply and install pricing please.

I have 5 “SmartSetup” light switches to install. 1 x 4 gang 1 x 3 gang 1 x 2 gang 2 x single gang dimmer Safety cert required. No smart configuration required - I will configure that. Just install in place of old switches.

I have sticky 4 double power point sockets that need to be replaced or fixed. By sticky I mean you can’t turn on or off. Please include price for supply and install interconnected smoke required, thanks!

Need to remove the dimmer for a new light fixture ('D' in the photo). While at it, would like the switches reoriented as shown in the diagram. I have the three gang Clipsal Classic plate that's needed.

Hi, I’m looking for a qualified A-Grade electrician to complete the following work: 1. Loose SGPO switch (see first photo). I already have the replacement parts. 2. Broken 2-gang switch (see second photo). Replacement switch will be provided. 3. Faulty bathroom downlight (third and fourth photo attached). This requires diagnosis and repair/replacement of components (parts to be supplied by electrician as required). Additional requirements: Must be a licensed A-Grade electrician. You will need to provide a Certificate of Electrical Compliance and Safety and must be registered with Energy Safe Victoria. All work will be inside a residential apartment on the first floor.

I need these switch’s for down lights and pendants remapping and a new dimmer unit installed. The two existing dimmer units are not functioning and may need replacing. They are driving dimmable halogen down lights (not LED)

I need 2 standard light switches to be replaced One is a single switch Second has 3 buttons and a dimmer and one button is pushed in so can’t turn on the light. Please supply the switches in cost of job

Need two electrical switch plates (one with 3 and the other with 2 switches) to be replaced in the bathroom. The 3-switch plate is narrow profile. Thanks.

Looking for a licensed electrician to replace two faulty electrical switches in my apartment!

need the switches replaced on my lamzu atlantis mini ptrferably with the Kailh GM 8.0 switches

Want light switches replace. Got 3 single light switches & 1 double gang switch

My Garage is getting some stud walls and plastering completed next week and I need some wiring done for powerpoints and light fittings before the plastering gets completed. 2 x Power Points 1 x Light (replacing existing light which runs from a switch at the back of the garage) Attached is a photo showing where everything should go. There is wiring running from the house already.