Find trusted local electricians in Bendigo

I have a split system I'd like installed before Christmas, if possible. It's only a small system and there is direct access to an outdoor space for the unit. Our house is colorbond.

Bedroom has one double socket. Would like to add two more and update one of the sockets from a double to a four.

.power points installation

The Inverter on the site connected to Solar is not working, For replacement the Company needs photo showing the DC voltages being tested.(with a Volt Meter)

7 metre room is going to be divided into 2 rooms. Requires removal of ceiling fan/light and relocation to intended new loungeroom and the the 2nd split room requires new light, light switch and double PowerPoint. Room is 7 metres x 3.5 metres- and we are looking to divine it in half (to create 2 smaller rooms.

Old ceramic switch board upgrade to RCD switch board

One light with fan removed. 2 new lights installed one with fan. New powerpoint installed aswell. - 7 metre room that we are looking to divide into 2 rooms- a lounge and study. Work required us Disconnection and removal of existing fan/light within current room then relocation of it to center of intended lounge area. Supply Wire and install new light in the intended study area within bedroom to new switch location Wire and install 1 x double PowerPoint

I'd like someone to move this NBN box outside of this bedroom to the common area, so it's easily accessible.

I initially had the NBN guys install the NBN box inside one of the bedrooms. I need this to be moved to the common area where anyone can access.

The chair is very slow in movement it was second hand 1 year ago

We have purchased an outdoor spa, which requires a dedicated, hard-wired connection with a residual current operated circuit breaker with overcurrent protection. The spa has a power rating of 15 to 25 amps, and we are looking for cost estimates to provide the electrical connection. I'm no electrician, but an educated guess and some lazy internet research indicate that the scope of work would likely include the following: - Supply, wire and install approximately 10 metres of 6.0 mm TPS twin core and earth cable from the main switchboard to the spa location. - Supply, wire and install 1 x 32A (or greater) 2-pole lockable rotary isolator with IP65 (or greater) rating at the rear of the property. - Supply, wire and install 1 x 32A RCBO (2-pole, 6 kA, C-CVE, C Curve, Type A, 30mA Type-A MOD6). - Supply and install approximately 10 metres of UV-resistant, waterproof electrical conduit. Preferably liquid-tight flexible non-metallic conduit, but PVC and steel would also be acceptable. - Potentially installing a supplementary earth / grounding rod (< 20 ohms) to provide a true earth / PME system, unless the pump / heater(s) are already bonded and there is no exposed metal. - Hardwiring the spa motor from the rotary isolator switch. - Testing, commissioning, and certificate of electrical safety. Additional details: - House is single-storey, tiled roof. - Spa delivery date is approximately 7-8 November, but to be confirmed nearer the time. - Spa model is the Alpine Spa Oregon https://alpinespas.com.au/shop/oregon/ - Switchboard location is the front / north wall. Approximately 7 metres from the spa location.

Need a licenced electrician to wire up 7kw GREE split system. Needs new circuit ran + isolator Inconnects already pulled through to indoor unit, just needs to be terminated

Hi, I want to replace all the bulbs with down lights. And install couple of hanging lights in the kitchen and lounge. Thank you.

I need a light switch moved to the other side of an internal wall. I also need two power points installed, one in each bathroom.

Looking for an installer to mount a 4000mm x 600mm x 150mm led lightbox on the top of our business shed. No electrical work is required. The image attached shows the placement of the board. The board looks much bigger in this image. The front of the shed is about 13 meter wide.

There is a power point above a bench in the laundry and i need one below the bench.

replace smoke alarm and 3 gang switch

I have an old Split System that is still working but would like a bigger new Split System and put in the same place and we have a split system installed. The electrical site is done but need the gas side finished.

1 new power point and replacement of 2,3 downlights. Need compliance certificate

Hi, would like the below minor electrical tasks for my house: - Replace faulty double powerpoint: The powerpoint in bedroom two does not securely hold a plug base and needs to be replaced. -Restructure sub board with new main isolator and 2x RCBO's for power and light: The sub board is incorrectly set up. There is no dedicated main isolator. The RCD for the power circuit cannot be isolated from the line side. The light circuit is RCD protected.