Find local downlights installers in South East Melbourne

6 downlights replaced and range hood lights replaced

Restore 2 x downlights and replace a couple of light switches.

Few of the downlights are not working. It is old style so needs to be replaced with the plug ones. Nearly 10 lights i will replace if offered good price

14x Downlights 2x Exhaust Fan ventilated 1x 3in1 IXL light 1x Led Strip 1x Sensor Light 1x Wall light 3x Outdoor powerpoint 24x Powerpoints 2x Smoke alarms 4x Antenna Point 3x Internet Points 6mm Cable from Main Switchboard to sub-board Circuits from Sub-Board 3x Power Circuit 1x Oven Circuit 1x Light Circuit

Single story supply fit ceiling fan and 5 downlights

Install Island bench downlight

I need to replace 38 existing builder-installed ceiling lights with new LED downlights, 34 indoor, 4 on alfresco. I'll supply new LED lights which are Mirabella 5-Colour Selectable LED Downlights. Scope of Work: 1. Remove 38 existing ceiling lights (standard batten holders). 2. Install & set color temperature of the lights before mounting. 3. Test all switches to ensure flawless operation. 4. Clean up. Requirements: 1. please provide your license number in your offer 2.Public liability insurance is preferred. 3. Electrical Safety Certificate to be provided upon completion.

I'm in the process of building a house. I need the following task listed below post handover - First Floor Downlight points only - I have new downlights still in the box and will be provided. Master Bed: 6DL Master Walk-In Robe: 4DL , plus 1 LP/N positioned in the centre Master Ensuite: 2DL Bed 2: 2 DL Bed 3: 2 DL Bed 4: 2 DL Passage between the Master Bed and Bed 2 on first floor: 6DL, evenly spaced along the passage. If you believe 5DL would provide sufficient and even lighting, I am happy to go with your recommendation. I also have the following additional electrical requests: Bedrooms 2 and 3 on first floor: One additional double GPO in each bedroom. Both rooms will have queen-size beds, so please use your professional judgement to position the GPOs appropriately in relation to the bed locations. Also need provision for two wall sconce lights on either side of bed Bed 4 in first floor: provision for sconce lights on either side of bed. Front of house – future electric gate: One power point at the front of the house to provide power for a future electric gate.. Location will be shown in person. Need to be done before concreting. Fence area on side of house: One power point as close as practical to the fence. Location will be shown in person. Need to be done before concreting. The house is still in the building stage with no exact finish date as yet. I need to know the total cost before I accept anyone for the task.

Need to replace power point ( double) and 1 ceiling downlight

I need to put in 12 downlights and have our pendants replaced in the kitchen We live in a 2 storey house See photos

We have some electical works need to be done. Please kindly provide your quote. Property 1: Change two ceiling lights: We bought two new ceiling lights and we would like to replace the old ones. Property 2: Fix two downlights: Two downlights in the living room are not working. We would like to have them fixed. Both properties are in Cranbourne West, 3 km between them (roughly 5-6 mins driving). We would prefer any time between 8th - 12th July. Thank you so much.

Three kitchen downlights tied to the same switch are pulsing. They will need to be replaced with new ones and changed to individual transformer (as opposed to connected)… if that makes sense.

Replace the current ceiling light with a bigger Philips down light

change 3 down lights In hallam today Will pay for lights separately

10 x Down light installation for a double storey house, on the “1st floor”. 4 holes pre-drilled already, 6 x spot marked. Existing lights in the room with two switches, no manholes, have NO access from the roof. Beams on the way (needs to be drilled)“refer to the images” .

Remove and replace 6 downlights, I can purchase the necessary lights from Bunnings based on your advice

Install 2 dimmable down lights preferably matching existing national nls brand and dimmer. Remove existing single light batten.

I provide down light you install it. You must have working with children check. You can quote your price.

I need wires run for 6 down lights and switches put in. Also 2 power points and a security camera moved thanks

Need 20 down lights marked out on ceiling spaced out evenly with a laser single storey roof access All wiring is done and complete with plug bases just need the downlights marked and drilled out