Find professional local designers near you

I need a long DIY banner created for a bbq that we can hang from the bbq hut in north bondi that says ‘MEET THE PARENTS’. Horizontal planner Approx 7 ft wide and 50-60cms deep. The words can be painted on

I need current roof rack mounting bracket legs to be accurately 3d scanned into CAD, modified in CAD and then fabricated (later cut, etc, etc) using 3mm EN10111 Grade DD11 steel only. The price you quote must be all inclusive and final inclusive of: 3d scanning into CAD Modify in CAD Fabricate based on the modified design in CAD

Logo and branding for a new design studio Description Hi, I'm starting a new design studio and I'm looking for someone to create my logo and basic branding. I'd rather not share the name publicly yet, so I'll tell the person I choose once we're set to go, and I'll ask them to keep it to themselves until I launch. I want it to feel warm and a bit editorial, but not trendy. Something that will still look good in ten years. I like simple, but it should still have some presence. The colour palette is about 90% locked in. It's neutral only, mostly ivory and off-white with a soft brown, and no accent colour. I'll share it with you once we start, so the logo should be designed to work within it. I'm open to small tweaks if you think something needs adjusting, but I'm not looking for a new palette. What I need: A main logo A smaller version or monogram for things like Instagram and email signatures Final palette with hex codes (this is just confirming and tidying what I already have) Font suggestions (please check they're licensed for business use) Final files in PNG, SVG and PDF, in colour and black and white A short one or two page guide on how to use it all One thing I'm strict about: no AI. Please don't use AI image generators or AI logo makers for any part of this, and no stock templates or pre-made marks. I want something you've actually designed. Once I've paid, I'll need full ownership of the work. When you reply, please send a link to your portfolio, how many concepts and revisions you include, and how long you think it will take. Budget: $ Timeframe:

I need someone to physically come and measure up our injection molding facility, floorplan, and impose the drawings on our exisiting floor plan with detailed dimensioned. 2D drawings is whats needed, but if you have the skill to make it 3D- we will consider. You need to have a laser measuring device and basic spatial knowledge.

Wanting someone to help design our house ,we purchased a house and wanting to do extentions , change kitchen and bathroom designs , adding more space , wanting both 2d and 3d images , doesn't have to be exact to scale , just wanting to show the builders , images and designs we are thinking of , the house is already built and we want to make it to suit what we want , please must be Australia based as I've had people before from overseas and they don't understand the way Australian houses are , I've tried and have a basic idea on how to use ai , but want someone who knows a bit more than myself, price is for a couple of days sending back and forth , please send some previous work you have done would be easier to decide

Need business logo designs for use on - signage - customer loyalty cards - uniforms I have a concept from chatgpt but would like it changed and made into relevant corrrct file types and tweaked.

We are setting up a new furniture showroom in Melbourne and are looking for an experienced 3D interior visualiser/designer who has done this kind of work in the past to help us plan and visualise the space before setup. The showroom is approximately 532 sqm and has an industrial warehouse-style interior with high ceilings, concrete walls, large windows and a mezzanine. We already have: * Floor plan with dimensions * Photos of the actual space * Photos and dimensions of our furniture * Approx. 12 sofa designs and 8 dining table designs, plus coffee tables, chairs, rugs, consoles and accessories We need someone to: * Create an accurate 2D furniture placement/layout * Plan customer flow through the showroom * Create individual living and dining room settings * Position sofas, dining tables, rugs, coffee tables, accent chairs and accessories * Recommend placement for reception/counter, feature areas and signage * Make good use of the existing windows, mezzanine and warehouse architecture * Produce realistic 3D renders showing how the completed showroom could look We are not looking for a major architectural redesign or expensive fit-out. The space already exists. The main focus is intelligent furniture placement, styling and creating a premium showroom experience. Style: modern, sophisticated, high-end but not overdone. Please include examples of previous retail/showroom/interior 3D work with your offer. We would prefer someone who can make design suggestions themselves rather than simply render instructions given to them. Melbourne-based preferred, particularly if you can visit the showroom, but remote designers with strong experience are also welcome.

I am looking at someone who can sketch a pencil sketches in colour from a photograph for me in A3 size ( it’s a two person photograph)

Lesson on specific topics.

Toddler(4 year old) portraits 30 to 45 mins in Royal Botanic Gardens Melbourne Including 2 adults in some photos.

Looking for someone who does this for a living and has their own scanner (Leica, Trimble, Faro or similar) and wants a private job. 2,908 m² block in Niddrie. Two storey house, pool, full size tennis court. Slopes fair bit from east to west of the block. I'm redoing the court and building retaining walls and want the whole property captured once so my draftsman can work in Revit off it. Scan everything, inside and out — every room on both levels, garage, alfresco, balconies, roof, all elevations, then the full block: pool, driveway, court, the two retaining walls beside the court, the slope above it, gardens, sheds, fences. Also need proper levels on AHD: contours at 250mm, pits, drainage, stormwater point of discharge, light poles, floor and ridge heights. The court's got settlement problems so I want spot levels on a 2m grid over the slab, edges, corners, either side of any crack, top and bottom of both walls every 3m, and the pit invert. Deliverables: point cloud as RCP/RCS and E57, DWG with 3D contours and points, CSV points, PDF at 1:200. Local origin near the house, MGA/AHD shift noted. Modelling not required, just the cloud and the survey. Tell me what scanner you use and send an example of something similar you've delivered. Fixed price please.

I have some images I need some help to combine and turn into vector art. Will provide images and further description of exactly what I'm looking for shortly

We have 100 white wedding invitation envelopes that need the guest’s first name and surname written directly onto the front of each envelope in elegant gold lettering/calligraphy. We will provide the complete list of names and the envelopes. * 100 envelopes * First name + surname only * Gold lettering * Written directly onto the envelopes — no stickers or labels * Elegant, clean and consistent finish metallic gold ink * Melbourne Please send photos of your previous work and your price for all 100 envelopes. Thank you!

Need a flyer made for girls basketball Advertising kids to join new teams Use your ai account to make flyer

Pre arranged job to design flyer. For Saviaz.

I need someone to help me custom make a video Open to offers needs to be in person

I’m a professional artist preparing a collection of ceramic work for a September exhibition and am looking for one careful, creative person to assist with my first glazing day this Saturday You’ll help paint and glaze ceramic pieces under my direction, including applying consistent base coats. There will likely be more paid glazing days available over the coming weeks if we work well together. Ceramics experience isn’t essential. I’m mainly looking for someone who: • Enjoys painting, art or detailed creative work • Has excellent attention to detail • Can follow instructions carefully • Is patient, gentle and reliable • Is comfortable completing repetitive, precise work All materials and instructions will be provided Please wear comfortable clothes that you don’t mind potentially getting glaze on.this washes out easily. When excepting, please tell me a little about yourself and any painting, ceramics, craft or other hands-on creative experience you have. Duration: Approximately 2-3hours

Format a 70 slide power point presentation for an international conference. The presentation has already been produced it just needs formatting to supplied specifications. Must be done in person so my husband can have input. Approx time to complete the job is one to two hours.

Design my university infographic using my completed content. I'm looking for someone with Canva or graphic design experience to format a university infographic. I've already completed all the research and written the content. So, no writing, editing, or research is required. I just need my content turned into a clean, professional, and visually appealing infographic that meets my assessment brief. I'll provide the text, brief, and any style preferences. I'm short on time, and design isn't my strength. If you have experience creating infographics, please get in touch with your quote. Thank you.

Design house number template as show below that can be cut on CO2 Laser machine. We use LightBurn Software