Find an experienced concreter in VIC

Assemble Easyshed 3m by 2.25m. All anchoring brackets, dynabolts provided

As Nice as this large Pizza oven is, id really like it removed. It blocks our deck and view into the garden. From what I can tell the base could be solid block/concrete. The black plastic surround also needs to be removed. I also need this pool fencing removed from the veggie patch and washing line removed. The fencing has been bolted on to concrete in places and also concreted in. Last thing is this small section of concrete needs to be cut and removed. If all rubbish can be removed at the time even better. I have no idea on price so il pop up a figure and see what quotes come in.

install small garden shed 1.5x1.5x2.1 on concrete floors. Let me know your total price. I bought it from easy shed and ready to install.

I need a Keter Manor Pent Essential 6x4 shed (1840 x 1120 x 1950 mm) assembled on my existing concrete slab, which slopes away from the house. The shed is brand new and flat-packed, and the manual is included. The job: 1. Build a level treated-pine base frame on the slab, packed on the low side, with a damp-proof layer underneath. 2. Anchor the frame to the slab. 3. Assemble the shed on the frame. 4. Anchor the shed through the pre-marked floor holes.

Aged Care renovation project: Need a operator with a road saw to cut a 30sqm area of concrete slab approx 6m x 5m room, by a depth of 40 to 50mm. Assuming 50 to 75mm between the lines it's about 400 linear meter of cutting. We will then jackhammer and remove.

Im pulling up roughly 30x3m worth of concrete and require it cut prior into 1.5m cubes

Need Garden shed installed with concrete base in the backyard. Appox size 3m by 2.8m

Need a shed which should have shelving and space for garden tools and x2 bikes I am considering 3x1.5M size can be flexible to meet requirements

Small concrete cutting job. Few meters at best. 100-120mm thick aprox

I need a professional concrete cutter to cut this 10 sqm section of concrete into 500mm x 500mm sections with a wet saw. Appx thickness of concrete is 110mm. Access is tight so would suit a van with a walk behind petrol saw as there's water there but no power. We will dispose of concrete sections into our on site skip.

Need slab cut for 2 pad footings. inside existing house. See attached plan. Size 1090x1090 each. Require dust extraction while cutting due to internal cutting.

2.25m x 1.5m Easy Gable Slider Garden install into a concrete pad. I will be available to assist when required. Tools required Drill, Masonry Bits 3mm Steel, 10mm Steel, 10mm Masonry, Pop Rivet Gun, String Line. 3 hours would be required

We have a cement slab. We have an unassembled garden shed. We need the shed assembled and secured to the slab.

Hi, I’m looking for someone to do concrete cutting and trenching. The trench will be approximately 15 metres long, 200mm wide and 300mm deep. Please let me know if you can provide a quote. Dispose off soil, concrete any waste out of cutting and trench.

I need a concrete path cut into manageable pieces to remove. Someone with a concrete saw would be great but I can also hire a saw for a day. The concrete is 100m thick and has rebar in it and the tile and mortar is approx another 50mm but most of the tiles have been removed.

need an experienced person to assemble a new EasyShed garden shed, model ETG-D3030-OW (3.00m × 3.00m, double door), on my property. What's ready: Shed is on site, unopened, in flat-pack boxes with manufacturer instructions Existing concrete slab, level and slightly larger than the shed footprint Power available on site The job: Assemble shed per manufacturer instructions (frame, wall sheets, roof, double doors) Square and anchor the shed to the concrete slab with masonry anchors/concrete screws (please bring suitable anchors and drill bits — let me know if you'd like me to supply them) Apply silicone sealant around the base channel and any junctions to make it weather-tight Doors aligned and operating smoothly, site left tidy Please quote including: your tools (hammer drill, riveter if needed) and sealant

Hi there, I’m looking for someone experienced with shed assembly/reassembly to rebuild an outdoor shed that was previously assembled but not secured to the concrete. It blew over in strong wind, so it now needs to be rebuilt properly and anchored to the ground. The shed pieces are intact and have been organised neatly. The job includes: - Inspecting the shed panels, frame, screws and parts to confirm what is still usable - Rebuilding/reassembling the shed - Straightening or working around any minor bent panels/parts where possible - Securing/anchoring the shed properly into the concrete so it is stable and wind-resistant - Cleaning up the work area after the job Important details: The shed is on a concrete surface It must be anchored into the concrete You’ll need to bring your own tools, including drill/driver and anything needed for concrete anchoring Ideally you have experience with sheds, flat-pack outdoor structures, or handyman assembly work Location: Keilor VIC Shed type is here: https://www.bunnings.com.au/absco-sheds-3-0-x-1-52-x-2-08m-woodland-grey-space-saver-double-door-garden-shed_p0079542?store=6310&gclsrc=aw.ds&gad_source=1&gad_campaignid=23022021534&gbraid=0AAAAADtbEB8yR4I1D4W0elDVFqK3k7b0P&gclid=Cj0KCQjw8PDPBhCeARIsAOJwmWWACuhWIyXixhqWUUyulp65Uqx2YxM_A6pzNO5nI7ZMfMgpQce93uoaAli6EALw_wcB Budget: around $200, but open to discussion depending on what’s needed.

I need this broken off concrete repaired.

Concrete Cutting & Trench Removal Needed Need someone to cut and remove a concrete trench in a new build house. Details: * Approx 5 metres long * Approx 350mm wide * Approx 200mm thick concrete slab * Builder has already marked out the cutting lines * Indoor access * Need saw cutting and concrete removal Please provide: 1. Quote including disposal/removal of or concrete waste 2. Quote excluding disposal (I can dispose myself) Please also include: * Availability * Experience/photos of similar jobs Photo attached.

Looking to get a section of concrete apron that wraps around the house cut out to enable a footing exposure. The section of concrete path to cut out is 100cm x 60cm x 8cm. Available space to work is about 1.5m to the fence. Access to water tap (10m) and power (2m). Don't need to account for waste disposal. Thanks Jared