Find an experienced concreter in North West Melbourne

We have a cement slab. We have an unassembled garden shed. We need the shed assembled and secured to the slab.

Advise on concrete and levels

Hi there, I’m looking for someone experienced with shed assembly/reassembly to rebuild an outdoor shed that was previously assembled but not secured to the concrete. It blew over in strong wind, so it now needs to be rebuilt properly and anchored to the ground. The shed pieces are intact and have been organised neatly. The job includes: - Inspecting the shed panels, frame, screws and parts to confirm what is still usable - Rebuilding/reassembling the shed - Straightening or working around any minor bent panels/parts where possible - Securing/anchoring the shed properly into the concrete so it is stable and wind-resistant - Cleaning up the work area after the job Important details: The shed is on a concrete surface It must be anchored into the concrete You’ll need to bring your own tools, including drill/driver and anything needed for concrete anchoring Ideally you have experience with sheds, flat-pack outdoor structures, or handyman assembly work Location: Keilor VIC Shed type is here: https://www.bunnings.com.au/absco-sheds-3-0-x-1-52-x-2-08m-woodland-grey-space-saver-double-door-garden-shed_p0079542?store=6310&gclsrc=aw.ds&gad_source=1&gad_campaignid=23022021534&gbraid=0AAAAADtbEB8yR4I1D4W0elDVFqK3k7b0P&gclid=Cj0KCQjw8PDPBhCeARIsAOJwmWWACuhWIyXixhqWUUyulp65Uqx2YxM_A6pzNO5nI7ZMfMgpQce93uoaAli6EALw_wcB Budget: around $200, but open to discussion depending on what’s needed.

Assemble EasyShed Garden Shed (3mx2.25m). I am looking for an experienced installer to assemble a brand new EasyShed shed at my property in Criagieburn (3064). Brand model: 2.25m x 3m Gable Roof Shed Site Details: The shed will be assembled on an existing, flat and completely level concrete surface. All components, panels, screws (including concrete anchors) and instructions available and ready to go. Requirement: Please bring your own tools (cordless drill/impact driver, rivets/screws driver bits, safety gear). Must secure and anchor the shed to the shed to the concrete base. Experience assembling sheds (EasyShed) is highly preferred.

Its a shed kit from Best Sheds, Incl electric roller door. Slab is ready to go.

Brand new EasyShed 0.78m depth 2.25 m wide 1.95m height shed installation, concrete already poured.

Need to get a Garden Ahed installed in the backyard. Already have concrete surface to install it. Easy shed 3m × 1.5m

Hi my name is Taner I need an Easy shed 1.5 by 1.5 meter shed installed and bolted to concrete with bolts provided

In preparation for a concrete slab for an extension, I require the site pegged for slab commencement. Site of land of extension - approx 12m X 14m Have stamped drawings. Location: Pascoe Vale

Looking for someone with shed assembly experience to build a 3x3m EasyShed and; supply anchor kit to securely anchor it to an existing concrete slab. Must work neat and not damage the lawn. Flexible with day and time Looking for a fair price and reliable workmanship Let me know your availability and quote. Thanks!

Install concrete sleepers

Clean garage floor which has car mud stains and external concrete path which has mould. Pictures are attached

Require concrete demo to soil demolition/jackhammering

Retaining wall with concrete sleepers - 0.6m height The metals posts already in the ground and I need help with installing the concrete sleepers. Possibly require to dig trenches for making the ground even for the retaining wall. Material and Concrete sleepers will be provided on site. I can help with lifting the sleepers Price is indicative. Please quote for your service.

We’re looking for a reliable and experienced person to help us replace approximately 17 metres of wooden garden sleepers with concrete sleepers, installed at a height of 2 to 3 sleepers high. The job involves digging and preparing the holes, installing steel posts, and fitting the concrete sleepers in a secure, level, and structurally sound way. It is extremely important that no damage is done to the surrounding plants during the process, as preserving the existing garden is a key priority. The site will be cleaned and fully prepared before you begin, so you can focus on a smooth and efficient installation. All materials required for the job will be provided, and we will go over the final list together before starting. While the job is expected to take around two days, we are happy for it to take longer if needed — what matters most is that the job is done properly and with care. Please note that a site inspection is required before we proceed, to make sure the scope of work is fully understood and agreed upon. Photos of the current area are attached for reference. If you have any questions or need more information to clarify the task, feel free to get in touch. We look forward to working with someone who takes pride in their work and pays attention to detail.

Hi, With new home built, unfortunately in some parts the slab is high and is exposed. Just wanting a step built to the door and also potentially a solution to hide the exposed slab. I do have spare tiles that can be used if suitable. Cheers Cheers

Looking for a skilled handyman or concreter to remove and dispose of the broken tiles shown in the attached photo (areas marked in red), and replace the entire tiled area with red concrete to match the adjacent driveway. Scope of Work: • Remove all broken and loose tiles in the marked areas. • Properly dispose of all waste materials. • Prepare the surface for new concrete (including cleaning, levelling, and formwork as needed). • Pour and finish red coloured concrete to match the surrounding driveway surface and texture as closely as possible. • Ensure smooth integration with the steps, railing, wall, and surrounding surfaces. • Clean up the work area after completion.

I need a chimney removed from the ceiling line through to the top of the roof. The job includes: • Removing the chimney completely from the roof. • Covering the opening on the roof with matching tiles. • Blocking off the interior space with a cement sheet. • Work must be done professionally, with an invoice provided. • The tradesperson must have their own insurance. Please see the attached photos for reference. If you have any questions or need more details, feel free to reach out. Looking for someone who can complete the job efficiently.

We require buns well to be made to suit . We think the best way is to anchor the well into the concrete floor and then box around the anchor points and then pour a wall into the box to match the height of surrounding walls

Need the concrete grinded so we can prime and paint it.