Find an experienced builder in West Adelaide

I need to rebuilt my veranda, 16.5m x 6.5m flat, with gable in the middle. Everything to be removed and rebuilt with new materials Bonus if you can do it all yourself 👍 I will supply skip, materials, colorbond sheets, etc just let me know what you need

Removal of existing driveway swing gates and replace with an automated sliding gate. Power to come from the house along the fenceline. L 3.2 m by H 1.8 Require a reliable motor with warranty.

I’m putting up a Stratco verandah and need help.Labour only as I have all the tools.

The pics i provided the job is in at largs bay to meet paver on foot path

Dismantling old gable wooden pergola and re-install them in another house. Need this person to do proper paperwork for council approval as well.

I want to get council approval to install a new driveway on one side of my property. Looking for somebody to draft the relevant drawings they require and submit to Marion council. I have attached an example of what the council suggests I would need to provide.

I need help installing a Stratco colorbond Verandah. Approximately 4 hours. I have all the tools. My offsider is out with an injury. Must be experienced with hand tools/roofing.

Wanting experienced and reliable builder. Have a 9x5 Stratco Hiland-tray Skillion roof shed that needs built. Have windows and doors already to go. Site will be prepped with footings dug. Job to be conducted between 11-26 August. Please see attached documents

Seeking to have my easyshed and a dog kennel (from same brand) assembled. This is the model shed. https://easyshed.com.au/products/otw-garden-shed-3m-w-x-0-78m-d-classic Dog kennel https://easyshed.com.au/products/dog-kennel-1-51m-w-x-0-78m-d-classic The shed will sit down the house side- which is open space and large enough to build it in also. It may need to be temporarily fixed to the house side or supported at the base during build. It’s packaged in cardboard which I can dispose of- so only assembly of the main shed required. Seeking someone responsible to assemble in a way that avoids scratches to the outer paintwork and leaves a tidy job behind.

Can I please get my shed fully assembled? The products and all the parts are all ready to assemble.

I need someone to remove a swing door from the front of a shed. Then demolish the first two bays of a shed by removing the corrugated iron, angle grind the C channel at the base above the concrete and then install the door on the remaining shed.

We are looking for someone to build a pergola outside please see the photo attached. We would like the whole area undercover.

Quote for a small strata for 3 outdoor lights. the supply is already installed however all have stopped working. The 2 bollards don’t have a proper base so would need to include cement (or similar) bases. The eave bunker is straightforward. Power is supplied from Unit 3 ‘s switchboard which is mine.

1. Remove/cut back vegetation within 300mm of fence. (Required for new fence to be installed). Approx 22.5m length of fence 2. Cut back ivy and grape vine on outhouse, pergola and in palm tree

approx 4m x 1m retaining wall to be built. remove existing concrete footing.

Hi, I need help with installing a patio cover at the back of my house. The product is from Simply Sheds and is a Factory Clearance Patio Cover with the following dimensions: Width: 6.00m Depth: 3.00m Height: 3.00m Colour: Green Product link: https://simplysheds.com.au/products/factory-clearance-patio-cover-6-00mw-x-3-00md-x-3-00mh-green Job Details: The patio cover will be installed at the back of the house (ground level). The ground is currently bare/soil — concrete will be poured after the installation is complete, so installer will need to secure posts in place appropriately (e.g., temporary bracing if needed until concrete is poured). The area is clear and accessible. Looking for someone with experience in assembling and installing patio covers or sheds. Installer needs to bring their own tools and safety equipment.

Hello, I'm going to be building a 600mm retaining wall around two sides of a sub divided block i have and also install a fence. I'm looking for someone with experience in retaining walls to assist myself, I think it will be around 4 to 5 days work and happy to pay day rates. I'd like to meet at my address to run through the project

Removal of two window air conditioners Installation of internal double leaf door Landscaping Replacement of existing driveway and footpath Refurbishment work on existing verandah

Assemble steel framed garden shed 3 metres x 2 metres x 2.4metres high

Installation of easy shed glider model