Hire professional shed installers in North East Melbourne

I am looking some one installed my garden shed in Epping 3*1.5*2.08need to do the wooden base to slop thanks

Concrete Slab & Garden Shed Installation – 3m x 3m Budget: $3,000 I am looking for an experienced concreter and/or shed installer to complete a garden shed project at my home in Melbourne. The shed location is currently covered with artificial grass laid over a level, compacted sand base. I require someone to remove part of the artificial grass, prepare and pour a reinforced concrete slab, then assemble and install a 3m x 3m metal garden shed that I will supply. Scope of Work • Cut and remove the required section of artificial grass. • Prepare the site for concreting. • Supply and install reinforcement mesh. • Pour and finish a reinforced concrete slab. • Assemble and install a supplied 3m x 3m metal garden shed. • Anchor the shed securely to the slab. • Remove all waste and leave the area clean and tidy. Slab Requirements • Approx. 3.2m x 3.2m finished size (allowing a 100mm perimeter around the shed). • Minimum 100mm thick reinforced concrete slab. • F62 mesh or equivalent reinforcement. • Level, square and professionally finished. Site Details • Flat, level backyard. • Existing artificial turf over compacted sand base. • Good side access. • Shed will be positioned against the rear wall of the garage. • Site photo available. Please Include • Details of your experience. • Photos of similar slab and shed projects. • Estimated timeframe. • Confirmation that you can complete both the slab and shed installation. Budget of $3,000 includes labour, materials, concrete, reinforcement mesh, fixings and rubbish removal. I am looking for a quality, professional job and would prefer someone who has completed similar projects before.

We bought a shed. Model is ES-D3015. Size is 3.0m x 1.51m x 2.14m. We have no time and no man power to assemble it. We are looking for someone to help us.

Looking for an experienced installer to assemble and install an EasyShed flat pack on an existing concrete slab. Job details: - Shed size: 2.25m (W) x 3m (D) x 2.4m (H) - Type: EasyShed gable roof, clip-on system - Scope: Full end-to-end installation (Unpack flat pack, Assemble all panels and frame, Secure shed to concrete slab using 2 packs of concrete fixings (provided)) Requirements: Must have prior experience installing garden sheds (EasyShed or similar) Bring all necessary tools and equipment Ensure proper alignment, leveling, and secure anchoring Product Preference - https://easyshed.com.au/products/2-25m-x-3m-gable-roof-garden-shed?variant=46656307691679

Shed installation. EasyShed 2.1m x 2.1m

Assemble Absco shed (3x1.5m) as pictured on concrete slab in backyard Location Epping

I’m looking for someone experienced to install 2 small garden sheds on an existing concrete floor. Both sheds are kit sets and relatively straightforward to assemble. Size of each shed: 1.75m long × 0.9m wide. Concrete base is already prepared and ready for installation. Please message me with your best quote and availability. Thank you.

Assemble Stratco Handi-mate HM4 sliding door shed. 2.21X1.55 onto concrete slab(already poured).

EasyShed shed assembly in carport. Good access, clear area to work in, semi-covered.

Assembly of x2 easyshed narrow garden shed slider (2.25m x 0.78) temporary attached to grass/weed mat. We had assembled the panels for one shed. Picture of area shed to be placed

Admitting defeat on this shed assembly. Most of the annoying work is already done. Two side wall panels fully assembled. Rear wall assembled. One roof section assembled. Other roof section and doors partially started. Need someone experienced with sheds/panel assembly to finish putting it together and stand it up. Mainly just need assembly completed and stood up. Anchoring/silicone can be skipped if needed to keep costs down. Located in thomastown Please send reasonable offers.

I require a level concrete slab prepared and poured for a metal shed. Shed dimensions (from manufacturer specs): Width: 3745 mm Depth: 780 mm Scope of work: Site preparation / ground leveling Formwork setup Supply and pour concrete slab suitable for shed installation Ensure slab is level, square, and finished smoothly Allow slight extra tolerance if recommended for shed base Please bring all tools/materials required and advise if additional site prep is needed. Experience with shed slab/concrete work preferred.

Install Absco Shed on existing concrete slab in my backyard Dimensions are 3x1.5m

need a 2.60x1.95M shed assembled. https://www.lasoo.com.au/products/one-deal/1855280/giantz-garden-shed-outdoor-storage-260x195m-tool-sheds-workshop-house-shelter?gad_source=1&gad_campaignid=20377310575&gbraid=0AAAAAon1ppp3gSNHBb0y6vIPBqULdE1_5&gclid=CjwKCAiA3fnJBhAgEiwAyqmY5TUCYAybVnokW8EL1Of9ji_UB2irqMH0SYNVZmwZW7sTyt9sPs-jXxoCho0QAvD_BwE

Installation of a 3 x 3 meter gable shed from easy sheds on a concrete slab. https://easyshed.com.au/products/gable-roof-garden-shed-3m-w-x-3m-d-classic?syclid=182dc1df-4da1-4e6d-bd49-0b38a0c5f416&utm_campaign=order-confirmation-email&utm_content=product&utm_medium=email&utm_source=OrderlyEmails

Need to install shed asap have the shed ready

Assemble flat pack shed. 2.25x2.25m.

Need someone experienced to install a shed - brand is easyshed. Model - Tall gable model ETG-2330 - Size: 2.25m width x 3m depth x 2.42m height

I would like to help you again

Assemble and place 2.08m x 0.97m Wheelie Bin EasyShed