Find a professional pergola installation expert in Rowville

Need a level coat on top of existing base render coat. No finish coat is needed. Material is available. Just you need your skill and tools.

Looking for someone to build a permanent outdoor structure with a retractable canopy in my backyard. Open to timber or steel construction and happy to take advice on the best design. Photos and a rough sketch of the area are attached. Please provide an approximate quote, availability, and examples of similar work completed. Ignore budget, please provide your best quote price

Looking for a professional to supply and install ONE motorised outdoor roller blind for a pergola in Rowville (3178). Specs & Requirements: Size: Approx. 3.6m W x 2.7m H (Successful bidder to do final check measure). Fabric: High-quality outdoor light colour (to block wind but keep light). Operation: Fully motorised Job Type: All-inclusive total quote required (Must include blind, motor, remote, electrical/wiring, and installation). Removal: Need to remove and dispose of the existing manual blinds. Please reply with your total price and the brand of blind you supply. Thanks. See Photos attached for details.

QUOTE on Removal of 7x4m Timber Pergola and install in Port Melbourne

Measurements are 6m X 3.6m . Want to replace existing polycarbonate roof with 75mm insulated panels with 2 skylights. Existing frame already there. Also want the middle beams removed for a clean look and downlights installed. Will need gutter and downpipe on the one side. Please quote

Simple timber pergola built over existing Tiber decking

New pergola without roof needs painting will supply paint 8mx6m

3x3 pergolas skydance 3 Oliver pergola

Gutters and down pipes leaking needs repair and replacement

We need someone today from this morning to paint the underside of pergola. 1 x coat, no sanding. Paint is here and ready to go. There are 9 rafters, about 8 metres of eaves sheeting, 3 posts, battons and a fascia board. need it done today 14/06

We need a pergola and decking done outdoor in the backyard. Approximately 42 Sqm. Can supply material but need both quote with and without

This is a simple and straightforward backyard project in Rowville. Here are the details: · Slab Dimensions: 5.6m x 2.1m x 0.1m · Location: Two sides against walls (standard rectangular shape) I initially planned to DIY this project, but my workmate is unavailable, and I’ve decided not to continue on my own. Here's the current status: · Crushed rock has already been laid and leveled. · Reinforcing mesh is prepped and ready to go. What’s left to do: · Build the wooden frame. · Pour the concrete. · Level it out. This is a small and straightforward project, with most of the groundwork already completed. I’m estimating a budget of around $800, but I’m open to reasonable quotes depending on your experience and the quality of work. Feel free to reach out with your quote or to discuss further details!

I need someone to help me with installation of sliding doors to the existing pergola, ground is level and need 3 sliding doors measuring 4700mm wide, 2600 wide and 2700 by 2100 height, Can provide more photos, attached photos are of the site and the third one is how it should look I have got the sliding doors and i can’t do the job due to a medical emergency,

Need to have the roof structure (not the roof itself) painted. Only the white ones need to be repainted with another coat of white paint. Update : The highest point - the centre beam is about 5m (or slightly less) high from the inside area and higher from the outside.

Need to have 3 metres of caulking done to pergola roof to wall to make waterproof

I need someone to renew and refresh the flooring of my pergola as it was never treated when installed

I need clear electric blinds installed in my pergola

Need to repair the hole that was torn. Materials need to be included in the price.

Looking for Someone to soft wash/pressure wash my laser lite pergola roof.

The joints on one side of the Pergola is detaching.