Find an experienced builder in Outer East Melbourne

After someone to build wall to wall 3 step merbau stairs

Have bought an easyshed that needs assembly.

Assemble 1.5m x 0.78m Flat Roof Shed from easy shed. https://easyshed.com.au/products/flat-roof-garden-shed-1-5m-w-x-0-78m-d-classic

Remove and replace approx 55 sq metres laserlite / polycarbonate pergola. Like for like replacement (existing sheets are damaged by lichen). Ideally you can also arrange supply of materials or specify what's required. There is no flashing or pointing to remove or replace. Existing timber to be reused. Take away all rubbish.

1.5m X 1.5m X 2.1m Easy shed installation. Sides, roof and door have been assembled. But shed needs to be erected and pegged into the ground. My partner and myself will be available to hold the shed upright to help with installation. If possible would like completed this Saturday morning. Otherwise another weekend can be arranged. Weather permitting.

🔨 Build Gable Roof Steel Pergola – 7.7m x 6.0m Pricing is just set so you can come visit the site and give full quote! 📍 Ferntree Gully, VIC Looking for an experienced installer or builder to replace our current flat-roof pergola with a new steel-framed gable roof version. It will attach to the fascia of a single-storey brick home — no posts required at the house. Deck and layout stay the same. Specs: • 7.7m wide x 6.0m deep • Gable roof (22.5° pitch) • 2.4m high at fascia, 3.83m at ridge • 3x front steel posts (100x100 RHS) • Rear beam (150x100x4.0 RHS) fascia-mounted into rafters Connection: • Use fascia support brackets (into rafters, not just fascia) • Flashing + tile lifting required • Must be sealed/weatherproof Materials: Want it built using (or equivalent): • 3mm galvinised steel posts/beams • Fascia brackets • Colorbond roofing • Apron flashing + sealant We can supply materials or happy for you to quote including them. Job Includes: • Install fascia brackets + rear beam • Frame gable roof and install front posts • Flashing and waterproofing • Structure must support ceiling fan/heaters Quoted price here is flexible — open to quotes. 📸 Pics show current setup (flat pergola) and what we’re after

Block driveway, is slippery when wet Have got new non-slippery paint, need someone to do 2 coats of paint

Need to install Bunings shed. Happy to give a hand. Please see the shed size and details in picture attached

We need someone today from this morning to paint the underside of pergola. 1 x coat, no sanding. Paint is here and ready to go. There are 9 rafters, about 8 metres of eaves sheeting, 3 posts, battons and a fascia board. need it done today 14/06

Hi there, I'm looking for a steel fabricator or handyman to help build a minimalist open-frame pergola in my backyard. Inspired by the style in the attached images, I’d like something simple, modern, and vine-ready (no roof/sheeting). Design & Specs: Size: 2.5m wide x 11m long Material: Steel or Aluminium (preferably galvanised or weathered/rust-effect) Structure: Posts and rafters only – open on top for climbing plants or fabric Must be fixed securely to ground (concrete footing or bolted base plates) Optional: mesh, wire, or bar lattice for plant support on top Budget: Looking to keep total cost (materials + labour) under $2,000, open to advice on how to simplify if needed

I’m looking to hire someone to provide a draft drawing for a potential renovation. The current opening is 3.5 meters, and I’d like to extend it to 4.8 meters. The beam will support the load of a single-story roof as well as a ceiling load, and it will connect with two additional beams. This is purely for conceptual and planning purposes, just to get an idea of the beam size and feasibility. The height of ceiling is 2.4meter There’s no commitment beyond this draft, and I’d ideally like to get it as soon as possible, even today if someone is available!

I’m looking for someone to help install the following garden shed: 🔗 Absco Sheds 3.0 x 3.0 x 2.06m Woodland Grey Premier Double Door Garden Shed – Bunnings The site is fully prepared — the surface is a flat concrete slab where an old shed used to be. That shed has already been removed, so this should be a straightforward assembly and anchoring job. Located in Wantirna close to Knox SC

Need new section of driveway and 3 steps concreted. Reo already in place. Rough finish. Approx 3m3 worth of concrete required. Area is approx 25-30m2. Contractor to supply and lay concrete.

Hi, I need my concrete driveway repainted. I will supply paint and xylene (primer). 📍 Location: Rowville, VIC 🕒 Timing: Flexible (within the next 1–2 weeks) 📋 Job Details: Size: Approx. standard double driveway and small walkway as pictured. Already fully prepped: Acid etched Pressure washed Dry and ready to paint Please blow off dust and debris before starting. Please also match and patch up cracks and let dry before starting. Ensure cracks are not visible once completed. --- 🎨 Application Details: First coat: diluted with xylene Second coat: standard undiluted Apply using roller (no spraying) Two clean, even coats required --- 💬 Please quote for: Labour only (I will supply the sealer and xylene)

Paint 2 external pergola’s First pergola is 3.5m x 4m Second pergola is 4.2m x 6m Paint provided

3m x 1.5m x 2.1m Skillion Roof Garden Shed

Looking for an experienced carpenter or handyman to assess and either repair or completely rebuild an outdoor timber pergola at my home in Boronia (3155). Size: Approx. 5m x 4m Structure: 3 timber posts, attached to an outdoor roof section Roofing: Clear corrugated plastic Issue: Timber posts and beams have visible rot and structural damage. The structure is unsafe in sections. Access: Through standard garage door, leads to a paved area Materials & Cleanup: You’ll need to supply all materials and remove all waste I'm open to: Repairing structurally sound sections (if possible) Or tearing down and rebuilding to match the existing layout Budget: $2000 total (materials + labour) — happy to discuss depending on scope

Install a drive way gate width as pic. Two swing gate with latch. One for 250cm width, the other for 115 width. Height is less than 180cm Post intalled as pic. Prefer metal material and wind resistant. Welcome an estimate offer.

Shed installation 6x3m Concreting already done

Need to rebuild a stud wall to spare a space of 125cm width * 30cm depth for kitchen. In the picture green color implies build and red implies removal. Need one power outlet on the kitchen side. Skirting is not needed.