Find an experienced builder in Latrobe Gippsland

Stratco Outback kit is on-site, including all parts. There are instructions and templates. Patio needs to be fixed to 2 fascia, beneath existing gutter. Patio is going onto concrete slab. Builders equipment, and likely experience with stratco would be the way to go. Some additional builders items are likely required for fixing the items to the fascia, and the slab. All hardware is included for the patio itself. This is a 2 person job, in my opinion. There needs to be some cutting of some items down to size, and some small folding of items. Area is just the corner area in photo - not the paving where parts are laid out. - Due date: Flexible

I need someone to make a concrete Shed base for me. All items needed will be sourced by you I have ordered a Shed 2.25m x 3m which needs to be put together and anchored to the concrete base also

Excavate & take away dirt next to driveway to match depth shown (just over housebrick depth). - Due date: Flexible

we have a solid area of concrete leading from driveway to carport- there is no gully in it to assist with drainage- so need some cut way so water does not go into carport

Concrete on the driveway has a couple of small patches and needs to be refilled

After asbestos is removed, you would need to replace the sheet. The same thing needs to be done for 3 properties. The sheet that needs to be replaced for at least one of the properties measures 2.4m x 1.2m. The three properties are based in warragul, crossover, Lang Lang

Need shed installed 2.1 x 1.41 x 1.81h

Looking for someone who can take on the construction of a small home project in Metung approximately 90 square metres.

Build a new pergola and car port - Due date: Flexible

Build pergola over existing deck

Need a garden shed installed and concrete slab poured for it if possible

Painting pergola before roofing sheets go down

Re-assemble ex demonstration shed. Approx size 2.4m x 1.5m x 1.8m high.

Looking for someone to paint my pergola. Easy job in that it’s already fully primed. Approx 12m long x 3.5m wide. Highest pitch measures 3.8m. 2 coats required. I’ve got the paint, all you need is ladder/brushes/rollers or whatever else you might need to get the job done without splashing paint all over the ground! Looking for someone who pays attention to detail and cleans up after themselves. I’d like to get it done ASAP, but flexible to days/times. See photos for more details. Potential for more work.

Need someone to install small garden shed 3mx2.25m Will be going on concrete.

Looking for a drafstman/building designer. I need a small toilet and shower installed in the office space but the body corporate has asked me to get a building permit. I need the plan drawn professionally to obtain the permit. Some plumbing work has already taken place as I didn’t know I needed a permit.

Hi looking to build a Colorbond shed it is 7 x 10 and 5.2 to eaves (supplied in kit) also has eaves to two sides included total measurements 15 x 9, need builder to install, organise concreting for base and install windows and doors and plumbing for bathroom, property at Golden Beach Victoria. Seeking estimates at this stage but hope to start within 6 months. Must be qualified builder who can do plans for council etc cheers Trace

Material supplied, need cages built. Concrete base needs to be done also

60x22 metre shed no floor 2walls enclosed steel shed

Renovating garage, would like to have a wall frame built (approximately 3m (l) x 2m (h)) and simple stairs up to loft. Budget is placeholder only, expected that the job will need a quote after reviewing site and requirements. Would like to have job completed as soon as possible.