Find a reliable local draftsman in North East Melbourne

I’ve built a deck and pegola out the back of my joint over an easement without a permit. The Architect or draftsman will then need to document what has been built ie; stumps, footings, heights, material finishes, offsets from boundaries etc to be documented on an architectural package. This will need to be shown in relation to the depth and location of the easement asset.

Planning to build a deck at my property. In order to obtain a building permit from the council, I need a plan to be drafted of the new deck. I would require a draftsman to build the plan. - Due date: Flexible

Need a draftsman to do drawings for me to obtain planning permit. Drawings are of timber fence on top of retaining wall. Need description./step-by-step on how this will be built and scale. - Due date: Before Friday, 3 November 2023

Install a Bosch downdraught, Rangehood stove top and move and electrical switch that is currently above the benchtop to below the benchtop - Due date: Before Sunday, 15 October 2023

We have inherited a shonky outdoor patio in our new home and have some young builders that are happy to replace it but would like technical drawings that they can follow. I've attached some stratco drawings we had done but ideally looking for a timber structure with flat roof and then we would line the ceiling with wood panels, lights, exhaust fans... Not sure what further info is required or if this can be performed remotely? - Due date: Before Friday, 15 September 2023

Looking for a Revit draftsperson to draw single & double-storey residential floor plans and elevations. - Due date: Flexible

Looking for a Revit Draftsperson to draw residential floor plans and elevations. - Due date: Flexible

Draftman for patio plans - Due date: Before Monday, 5 June 2023

I am looking for a draftsperson to draw up plans required to submit to surveyor for council permits to build a veranda with deck for residential property - Due date: Flexible

I am after a draft person who can help us with the process of design and building permit approval. We have a shed in our property backyard (structure exist along with planning permit). I am looking to convert to office/workstation as shown in the attached floorplan or granny flat if possible (based on what is possible for approval). We will also want a toilet+bathrom and a small kitchen inside. - Due date: Flexible

Im looking for a draftsman to draw up some plans for me. I have a brick double car garage on my house and I want to knock the side wall out and extend and put another single care garage on the side of it. I want it to be bricked up and matched the house. - Due date: Flexible

Need plan drawn up for permit approval, additional of exhaust hood/ appliances in a commercial kitchen

I am looking for a draftsman to do a plan for a deck and pagola. I need this to get council approval for the building permit - Due date: Flexible

Wanting someone to draft and design a Deck and Pergola at the rear of our property in Watsonia, VIC, 3087. Deck/pergola size will be approx. 5mx5m. Plans to be submitted to council for approval.

4m x 3m pergola and permit requirements.

building a gable roof over a existing decking approximately 6000L x 5500W Decking is 2400 off the ground

Need professional drawings for whittlesea council approval.

Hello, Need a draftsman, 4bed home (frame only breakdown) including timber consumption, measurements per wall cutting list etc.. I’m needing a simple breakdown of frames only and what’s included. Have plan available needing it drawn asap Have another 2 more homes to follow.

We need to get our alfresco extended and to get council permits need a drawing of the extensions.

I need plans drawn up for simple extension off the kitchen. I am enclosing existing patio by installing gable roof, walls left and right, and double door and windows along length of building. This extension will measure 8m x 3.5m Plans would need to be compliant with council requirements.