Looking for an experienced handyman or shower restoration professional to complete three tasks on a standard semi-frameless shower enclosure: Remove & Replace Mouldy Silicone: Fully strip out old, mouldy sealant along the shower base/curb, clean and sanitize the joint, and apply fresh, neat, high-grade mould-resistant sanitary silicone. Replace Bottom Door Seal: Remove the existing mouldy sweep seal on the glass door and fit a new matching flexible drip seal/sweep strip (6mm glass). Clean & Restore Glass Screen: Remove heavy calcium buildup and hard water staining from the shower glass panels to restore clarity. All area photos attached for scope.

Looking for an experienced handyman or tiler to remove the existing silicone around my bathtub and apply new white bathroom silicone. Scope of work: * Remove all existing silicone around the bath perimeter * Clean and prepare surfaces * Apply new silicone neatly with a smooth, professional finish * Ensure a watertight seal and clean up afterwards Materials: * I have already purchased the silicone (Selleys No Mould White Silicone Sealant). * Please bring your own tools, including scraper, caulking gun and cleaning materials.

Need someone to remove the old sealant from my shower and re-caulk it

Floors in tow small bathrooms have been resurfaced. Old silo was dug out at the time. New silo needs to go around floor edges and shower floor. Grey color ideally. Each bathrooms approx 1.8mx3m

The existing silicone is black in the corners of the shower floor and it needs to be removed and replaced.

We are a local restoration/water damage firm in Brisbane, we are looking to expand our partnership network with reputable shower reseal / grout repair companies. We work with a few now and have we specialise in the subsequent water damage caused from waterproofing failure to adjacent walls, ceilings beneath etc etc. Referral rewards per job

Bathroom sealant repair or reapplication Must be 100% silicon products Remove old sealant then re- apply

Scope of work required: 1. Remove all existing silicone sealant where the shower screen frame meets:    • Walls (internal and external)    • Tiled hob (internal and external, including base of frame) 2. Prepare and apply new continuous silicone sealing to all frame‑to‑wall and frame‑to‑hob joints, internally and externally, to ensure the shower is fully watertight 3. Use mould-resistant bathroom silicone, suitable for wet areas 4. Patch‑repair small areas of missing or discoloured white wall grout (cosmetic only) 5. Remove/repair/replace any grey epoxy grout on hob that has cracked/failed Additional information and background: Ensuite shower is leaking externally. Source is water tracking under the shower screen base frame, across the tiled hob, and escaping via a joint beneath the tiles (proved by temporarily sealing the gap under the shower screen base with tape — the leak stopped). Current condition: • Shower screen frame is mounted on an elevated tiled hob • Silicone sealant currently exists at the frame‑to‑wall joints (internal & external), some mould marks • At the base, the shower screen frame appears to be sealed only externally, with no visible internal sealing • Internally, the screen base sits almost flush with the vertical face of the hob • Unknown whether any sealant exists underneath the frame • Floor tile grout appears sound and is not to be disturbed • Wall grout is standard white cement grout • Hob grout is grey epoxy grout    - Wall grout repairs are not related to the leak    - No full wall regrouting required    - Hob epoxy grout to be left undisturbed unless a clearly failed joint is identified Important notes: • This is a targeted shower leak repair, not a bathroom renovation • No tile removal required • No floor regrouting required • No membrane or waterproofing work required • Please do not quote for full regrouting or renovations Looking for someone experienced in shower leak repairs or shower screen resealing, not general handyman work.

Requires removing grout around shower over bath, replacing grout and silicone around bath. Does not require regrout to full Wall height only to shower head height

Our shower currently has an issue with the silicone in which small amounts of water are able to leak out. This is allowing for water to pool and has started to cause mould on the skirting board. We will need someone to please repair this silicone and ensure it is all waterproof. They will also need to resolve the mould on the door frame and may need to do a slight touch-up on the paint due to this

Looking for someone with experience to remove and replace the silicone in my shower. This is purely a cosmetic job to replace old, discoloured silicone, there are no leaks. Details: Shower is in good condition, just needs fresh silicone Light grey silicone to match existing grout Must be neat and tidy with attention to detail Please bring your own tools and materials Shower dirty in the photos (apologies – didn’t get a chance to clean beforehand), but it has now been cleaned and will be dry and ready for the job this week Need this completed on Thursday 10 July. Please include examples of similar work if available. Thanks!

Need to clear off the silicon and reseal the shower

4 shower cubicles 4 toilet cubicle Tiled full height 2.2m ceilings Grey silicone - Due date: Needs to be done on Wednesday, 13 December 2023

Re silicone shower base and corner of shower walls where the existing silicone has deteriorated. Re silicone where the bathroom vanity meets the wall tiles. - Due date: Needs to be done on Thursday, 23 November 2023

Existing bathroom silicone in shower cavity to be replaced at floor/wall corners as indicated in photos. Flexibility with times is required for job, either early morning before 8am or in evening after 6pm. Or on a Saturday. Preference is for professional plumber or tradesperson with experience in these types of waterproofing jobs. - Due date: Flexible

The old silicone is not water tight along the 3 edges of the shower frame. Needs removing first and reapplying new silicone.