Find professional pool gate repairs in Inner South Melbourne

Hello. I have a pool fence that needs to be fixed so that it closes automatically - at the moment you need to push it closed (thus is not council compliant). I would like it done as cheaply and easily as possible as I am going to replace the gate with something new shortly. Thank you!

Pool gate isn't latching properly, I suspect the rubber in the hinge needs adjusting, happy to help if you need a second pair of hands. Bedroom door is also not latching properly, I need to lift the door for it to engage.

gate post for the pool gate has fallen off centre, the gate doesn’t swing back properly and so the self closing mechanism no longer works. The gate post needs to be straightened and braced so this does not reoccur.

We have a glass pool fence and gate. The gate has dropped and it’s very difficult to close. See photos for more detail. Pics of hinges included too. Screws to hinges have rusted so could these be replaced too please. Only 2 hinges on gate.

Pool gate not automatically clicking shut and the latch of a different gate (side gate) needs replacing.

To Remove the old Hinges and install new auto Close Hinges (New Hinges Supplied by us) to a wooden pool Gate with metal frame. You need to make sure Gate is correctly aligned and the auto close works correctly once the new hinges are installed

The bottom hinge of our pool gate has come off the metal pole and requires being put back. Ideally screwed in. Materials needed.

I need my glass pool gate adjusted so it closes properly.

Glass Pool gate hinge is screwed into Hebal column and one of two supports is loose so door has dropped slightly and no longer locks without assistance .

Our pool gate’s self closing hinges dont work anymore and the gate just slams shut - therefore i assume the hinges need to be replaced.

I need a pool gate made. It is four metres long. Pls refer to the picture Please specify what type of gate/femce you will use thank you

Pool gate hinge needs to be tightened and secured with a pin Pool fence posts secured into ground Shower head to change fitting Shower curtain to shorten rod and change

Our pool gate doesn’t shut on its own. The hinges need to be replaced (we have new hinges as per photo) and may need some adjusting.

I have 2 pool gates that are not latching from all positions. one has a Latch requires an adjustment as per first pic. This post will need to be secured to the house. The second gate also not latching but that is because the post is moving. If anything is used to secure the gate, it must be at the very top of the post Not sure what to secure it to. This gate also needs adjusting so the gap between the glass and the post is less than 10mm

Gate is no longer self closing and has dropped slightly

My pool gate has dropped and doesnt close properly. It needs rehanging

Need to repair an door in the house which is getting jammed on the door frame. Also need adjustments to 3 pool gates which are too slow in closing.

hi there, Job details: we have x2 pool gates, we've had installed about a year ago. but they are a bit cheap and not soft close. we'd like to keep same x2 pool glass actual gates and just change x2 hinges on both and the gate closing mechanism for a better brand/model so cosmetically looks better. this listing small task: - swap/mount/change pool gate hinges and closing mechanism/lock /latches for our existing x2 glass pool gates. photos attached payment: -x3 hours labour only - $80/hour Included in this task (plus extra to offset your airtasker fee). extra time payable on top at $80/hour - obviously plus extra parts cost on top seperately , payable by us (you quote at job) Flexible day asap in next week or so that suits your schedule between bigger jobs PS: this small introduction task will lead to other add on pool or pool fence work , quoted separately

Two gates need repairing, currently mot self closing and one gate not in alignment .dates flexible but need done by Wednesday next week. One gate will need to be fully installed , picking new panel up today . - Due date: Before Friday, 9 February 2024

hi there, Job details: we have x2 pool gates, we've had installed about a year ago. but they are a bit cheap and not soft close. we'd like to keep same x2 pool glass actual gates and just change x2 hinges on both and the gate closing mechanism for a better brand/model so cosmetically looks better. this listing small task: - swap/mount/change pool gate hinges and closing mechanism/lock /latches for our existing x2 glass pool gates. photos attached payment: -x3 hours labour only - $80/hour Included in this task (plus extra to offset your airtasker fee). extra time payable on top at $80/hour - obviously plus extra parts cost on top seperately , payable by us (you quote at job) Flexible day asap in next week or so that suits your schedule between bigger jobs PS: this small introduction task will lead to other add on pool or pool fence work , quoted separately