Find a professional gyprocker contractor in Bellevue Hill

Plasterboard wall repair after TV mount removal – professional finish required. I have a wall with multiple old TV mount holes, metal anchors, and a cable chase opening. I need: • All metal anchors removed • Damaged plasterboard cut back cleanly • New plasterboard patches installed with backing • Joints taped, skim coated, sanded flat • Entire wall repainted to match existing finish This is not a filler-only job — it must be done properly so the wall is perfectly flat and invisible after painting. I also want all cables hidden behind the wall Please quote including materials and paint.

Fix square hole in gyprock ceiling Square piece that was cut out is still on site (please see photo) Must be qualified and insured Must bring your own tools

Need some patchwork done on my gyprock and painted. I will supply paint. Need you to gyprock

I need a plasterer to do some setting and final coat on reno. 1-3 days work, $1000 per day - Due date: Needs to be done on Monday, 3 July 2023

Available anytime from tonight until Thursday night. There are three Gyprock wall locations to repair the holes and paint. I have already purchased 1L of the colour matched paint. 1) TV Bracket : which has left 8 small screw holes and 4 larger holes which were used to pass the wiring through. The 4 holes range between 5.5-7cm in diameter. 2) Painting : 2 small screw holes 3) Painting: 4 small screw holes - Due date: Before Friday, 16 June 2023

A hole the size of a cricket ball in the gyprock to be fixed and 2 x draws to be reistalled back in a wardrobe (can be glued) and 1 kitchen cupboard to be reistalled. - Due date: Needs to be done on Saturday, 6 May 2023

Hang a 130x90cm framed picture on a gyprock wall.. it’s mounted on an aluminium board so it’s relatively heavy and will need two hanging points - Due date: Before Saturday, 24 December 2022

I have a project that requires a carpenter or handy man to install timbers for me to install panels against... Basically you will be screwing 4x2 timber underside of the Gyprock with a screw long enough to punch threw and grab the gyprock.. You need 80mm screws. Timber must be 50mm back from front of joniery. I'll be site all day. 4 hours will do it as I've got the timbers already. Just need to cut to size which is about 250 in height

1) Gyprock ceiling had been cut to create a man hole for inspection, now the two cut outs need to be closed. I still have the two cut outs, so you need to get timber and drill the cut outs back on. No need to plaster etc, just to close the holes so no animal/birds can go in to nest. 2) while you are here with a drill, can you also put up a picture frame onto my wall, please - Due date: Flexible