Find a local glass fencing contractor in St Ives NSW

We just moved into our new house recently and was told the pool fence is not meet the compliance requirements, probably need to make it taller. Wanted to get someone to come and check what we need to do and do it.

Pool fence needs fixing. Current metal poles holding it up have rusted and bent. Wood of fence is still in good condition so just need someone to help make it sturdy again! Budget below is an absolute guess. Posting again as needed to save up $$ for task.

The pool gate doesn’t latch and the gate gets stuck in the concrete paving which makes it non compliant.

Need to install 2 x pool fence by connecting them over the 3.8m timber fence. (Fence from Bunnings, as shown in the photo) and post on top of the timber fence. Aluminium fence is 2400x900mm each.

Pool fence required to comply with nsw pool requirements circa 20-30 metres of fencing at 1.8 m height Fence must meet compliance requirements

Supply and fit pool fence screen using this ekodeck castellated panel from bunings

Drill into Metal pool fence to install perspex as to meet with pool compliance. Must bring own tools & screws please. I have the sheet of Perspex.

Replace exisitng aluminium pool fencing approximately 5.7 metres in length plus pool gate (approx 1 metre) including self closing hinges and magna latch etc (must be pool compliant).

1 day two men (full day) to install swimming pool fence (half metal fence and half glass fence) - fence material and screws are ready but you need to have cutting metal equipment and drilling hole equipment (10mm dia holes) 1. Cut 7 old existing metal pool posts (50mm*50mm)prior to new installations- see photos - cutting equipment by you 2. for metal parts of the fence install 7 screw posts on pavement and install metal fence 3. for glass part Install 30 spigots - each has 4 screws of 10mm dia and 75mm length ( = 30*4=120 holes) - holes to be drilled on sandstone pavement - you to provide drilling equipments (I have spigot and screws ready, and location of holes already marked on ground) and finally place glasses on spigots -see pictures - Due date: Needs to be done on Monday, 12 June 2023

Most of the work has been done by a handyman (aluminium, paling fence). - Due date: Flexible

I have over 30 linear meters of glass fence to be installed. Spigots need to drilled through 30mm travertine paver and another 50mm+ into concrete. Longer concrete bolt than pictured. Spigots and 1100mm glass fence on-site now ready to go. Thanks

To facilitate a deck repair I require 3 glass fence panels ( including one which is a gate) uninstalled before the stated date. Once the deck is repaired approx 2 weeks afterwards- I require those panels reinstalled. - Due date: Before Wednesday, 27 July 2022

We removed out glass pool fence to replace the deck. We need to have it re-installed to make it safe again. We have the glass and attachments. - Due date: Flexible

Need someone help to repair a few pool fence posts which are rusted at the bottom ( install a new one next to the old one to reinforce it and concrete to the ground); Reinforce a few boundary fences ( bamboo panels) to make them in alignment; Install couple of 1.8mts barriers around the pool for safety compliances; Change the pool gate hinges. Change an outdoor water tap's location. ( Right now its too close to the pool gate and we want to move it further away, If its feasible ) - Due date: Before Saturday, 11th Dec 2021