Find an experienced concreter in North Brisbane

Cut 100 - 120mm off 4x Concrete Sleepers 9inch grinder required Please send offers

I need someone to lay blocks on footings. I will provide all the blocks, H blocks, mortar, Regards etc. I am a handy man and will work with you to assist. Possibly 2 days work $500 per day just for your expertise and labour.

Concrete path in front of house 8m x1.1m Will be paving over the top

Concrete driveway for our new residence in 2 halifax court taigum queensland.

The driveway is covered with payware and I plan to change it with concrete.

Check the work needed in the add images section.

Need concrete resurfacing for a slab in sunroom approx 18m². It currently has cracks and water seeps in from one side with heavy rain so will need to ensure water run off. I just put a random price down, happy to take quotes.

Please provide us a quote for an approx 12 sq m slab of concrete that will extend our existing patio concrete, Only the grass area will need to be removed first.

Seeking options to reset the besser blocks that have moved over time. Unsure of source. Hopefully can remove, chip off concrete and reset with same block work. Offer should include all materials needed.

I’m looking for a professional to cut approximately 3 metres of concrete, install a drainage trench, re-pour around 4 m² of concrete, and set up a shed. Some minor landscaping work is also required.

Area of 6x4 meters needs a concrete slab. Ground made of compacted stone

I have some caps for my garden edging that are 60mm thick and need to be cut for the curve. Majority of garden is straight. Will need to cut approximately 11.

We need a 3.4m by 15cm channel in our outdoor concrete cut to make way for some drainage

Hi there, I am looking for person who can help me for concreting on the weekend

We have extended our retaining wall, and I require this little section to be concreted. It will be extending an existing concrete slab. The dimensions are 1600x1398mm with a varying depth, as it is filled with rubble. I will crazy pave over the slab eventually, but we have a puppy coming and it’s currently a hazard for little legs! This is around the back of a house, with side access for a wheel burrow. Edit: we want to cap the existing concrete and level the slab to a few inches higher than where the steel is currently sitting.

I’ve recently poured mortar / concrete (and painted over it) into a channel at the base of my raised garden beds and water has started to pool as there’s no longer any drainage. So I’m wanting to get it broken up and removed. Should be doable with a hammer drill, small jackhammer and/or a concrete saw. The mortar/concrete is only about 5cm thick/deep and is 10cm wide and 15m long. Once you’ve dug up the mortar I want you to remove a further 20cm of the dirt below it so that I can install a drain and gravel. Photos attached showing measurements.

Remove around 2.5 m^3 of concrete driveway. It has been cut up into blocks .9m x.9 m and smaller but around 0.125 m( 5") thick. Easy wide access from blocks to street.

Removal of old metal cement mixer that will require at least 2 strong people to lift onto a trolley (provided by you) to be wheeled downhill from the back yard to the front. It is not in working order. Very rusty. It is your choice as to the destination - BBC refuse or scrap metal recycling. I have a BCC voucher if needed.

Demolish, remove and dispose of 2 slabs. Slab 1 - 3.1m x 3.1m (Area 9.6m2) x 0.15m deep - assume it is reinforced concrete. Slab 2 - Area 7.5m2 x 0.15m deep. Looks like it’s paving bricks with screed on top but can’t confirm. Access: Slabs located in rear garden. Access via garage (height limit 1.95m) and 1.5m wide path at narrowest point

12 meters of grinding outdoors already level just scrape off the tile surface.