Find a cladding professional in East Melbourne

Looking for an experienced carpenter/chippy to clad nib wall and the underside of an existing mezzanine floor ceiling with 12mm plywood. Scope of works: Fix 12mm ply sheets to underside of mezzanine Install some back blocking and noggins as required Neat finish around existing services/edges General tidy workmanship expected Materials supplied: 12mm plywood Timber Screws Liquid nails You will need your own tools and experience doing similar work.
Access is clear and job is ready to go. Please include experience/photos if possible.

I need a cat door installed in a room that has plasterboard on the interior wall and aluminium cladding on the exterior. I will supply the cat door myself. I just need assisstance installing it. Thanks!

The cement sheet has come off and needs a new one attached and then repainted

After someone who can frame up an opening 3700mm wide by 2100mm high, install a window (670mm x 1015mm) and install timbee weatherboard cladding to cover up the opening from outside

We would like to install lightweight composite cladding to the existing fence located between the pool retaining wall and the boundary fence. The space between the retaining wall and fence is limited. The approximate dimensions are 1.8 M in height and 10 M in length. We are looking to have this completed as soon as possible.

Metal cladding for 3.58mX2.53m wall. Invite quotes including material and labour

2 walls Light brown cladding to wall1: 91 inchesx 70inches Wall2: 134 inchesx 85 inches

External corner of house has damaged cladding and trim with cracked sealant and exposed material.

I need cladding in my walls.

I’m looking for a skilled handyman / carpenter to install decorative wall cladding on one internal wall.Scope of work includes: Measure, cut, and install wall cladding panels neatly on the wall. Remove existing TV from wall bracket Reinstall the TV approximately 10 cm to the side (new position). Ensure TV is level and securely mounted General tidy-up after the job Cladding will need accurate cutting to fit properly Wall is already painted (internal wall)TV mount is existing (may need slight repositioning) Care required to avoid damage to wall, TV, or cables Access: Easy internal access Parking available

20 square metres of bluestone tiles approx 230mm x 230mm x 32mm thick need to fix to rendered wall with Mapaei adhesive in brick pattern. On ground no ladder needed. 14 lineal metres x 1.2-1.5 high

Request on-site inspection, repair quote, and semi-prefessional report for two 5-year-old units in Ashburton. First-floor polystyrene cladding has cracks and rust spots at multiple locations. See attached photos.

Certified Carpenter to Install timber Mortlock timber cladding for new carport ceiling and kitchen canopy ceiling. [Update]: Also need noggins for the roller door as per the attached plan. CARPORT & CANOPY ROOF Mortlock TRENDPLANK 120x19 T&G Pacific Teak Cladding, Endmatched & Pre-Oiled, (Random Lengths 0.9 - 3.6m Lengths) Total: 57m2, Including Waste) https://www.mortlock.com.au/timber-cladding/trend-plank/ Screw will be provided. Need ASAP , start next week.

There’s a medium sized garden bed using brick tile cladding in our front yard. There’s one corner which has sunk into the ground, causing the brickwork to collapse. We want the base to be stabilised and the brickwork to be reset. There’s also piping underneath / nearby there so you’ll need to be extra careful to not damage it.

Put the cladding on the kitchen island to cover the board

I want to put the stone wall cladding (sample : pic 2 ) on the middle pole The size is approx. 1050(w) * 470 (D) * 5000 (H) Pls include all the material in your offer. All 4 sides of the column with Jindabyne stone cladding .

Install wall cladding to three walls. Wall 1. 2000 w x 2700 h Wall 2. 3300 w x 2700 h Wall 3. 3300 w x 2700 h Cladding is 2.9m x 15cm wide. Needs to be cut and glued on. Pretty easy job. Camberwell

Here is a link to the product that we already purchased and have received, and would like installed in early Feb: https://www.thewoodveneerhub.com.au/collections/acoustic-slat-wood-wall-panels?gad_source=1&gclid=CjwKCAiAhP67BhAVEiwA2E_9gx3DkHhGSwQnq6FEk03e5lJcJ2Xbr3945VUSzj0UMuIn2bUxuvXrPhoCOg4QAvD_BwE As you can see in the pictures, I have highlighted the wall area in yellow where we want the panels to be installed. There is a TV and floating cabinet that will need to be worked around with the cutting of the panels. The TV will likely need to come down during installation, then put back up. We will of course clean up the area prior so there is no stuff in the way. The next pic is just of the boxes of wall panels we have already received. We received this video from the company on how to install: https://www.youtube.com/watch?v=7K_DD_7lLsQ It is supposed to be DIY installation, but we would prefer a carpenter or joiner to do this for us.

Need to re-do exterior cladding and repaint. All necessities need to do. 3 sides of house pictures are attached. The rest is steel roof. It is on the upper level.

Temporary repair cladding on apartment First level only. I can send photo