Find skilled builders in Central Coast

Task Description: Looking for an experienced concreter or concrete resurfacing specialist to repair surface-level scrapes/scratches on a concrete driveway in Terrigal. Scope of Work: Area: Approximately 2 m² – 4 m² section on a residential concrete driveway. Issue: Equipment gouges / surface scratches (concrete substrate itself is structurally sound; no structural slab cracking repairs required for this task). Job Required: Clean/prep the affected scratched zone, apply a suitable concrete repair mortar / skim coat / resurfacing compound, and color-match / seal the patch as much as possible to blend with the surrounding driveway.

I have a floor platform built ready to have an easy shed assembled upon it

Easy shed assembly. Tall flat model ETF-S1508 Size 1.51m x 0.78mx 2.13m

Timber Pickett fence Left side neighbours fence to left edge of drive way 7.3m Left side driveway to right side drive way 5m Right side driveway to right side neighbours 2.5m Roughly 10m of Pickett fence and 5m Pickett gate We want 1.8m length pickets The photo is a rough idea of what I’d like we will do the painting We want the key details like the black hinges and for the fence to look as close to that one in the photo

I can’t physically do this myself and don’t have the tools or expertise. Both 30m deck and pergola frame require pressure washing/sanding and I am open to whether stain or natural will provide better longer term protection.

we will have gravel delivered and need a small excavator to spread it in a small area roughly 20 x 20m

We have purchased an easyshed and need someone to assemble it. Easyshed experience preferred!

Need someone to grind down a sharp concrete lip at the entrance to my gravel driveway in North Gosford. My car is scraping every time I reverse in. The lip is a raised triangular concrete edge where the road meets the driveway. I just need the top of the lip ground down by about 20-30mm to create a smooth slope. I believe it requires someone with an angle grinder with a diamond cup wheel. Photos attached showing the exact spot from multiple angles.

I've bought an EasyShed garden shed and I'm looking for someone with experience assembling sheds. I'll be helping with the installation, so we'll put it together as a team. The shed comes as flat packs with full assembly instructions. Dimensions: 3.75 m (L) × 1.51 m (W) × 2.14 m (H) If you've installed EasyShed sheds or similar before, please let me know your availability and your quote. Thanks!

My electric pergola is not working. I need someone experienced to source the correct replacement motor and install it so the pergola works properly again. Please note: the budget is for labour only. I will pay separately for the cost of the motor or any required parts.

Need a small garden shed assembled. I have attempted with no luck.

Remove pergola, gardening required too. Weed spray done so only have to pull it out.

Put the shed together and install

Assemble a shed 1.5 x .75

Assembly of a flat pack Garden Shed 2.58 x 2.07 x 2.02m, with 2 Sliding Doors. Base is already built, it’s really just be shed assembly. If possible today I’d pay extra $50.

Require a licensed surveyor to undertake a detailed level and contour survey of an existing residential driveway in Woy Woy Bay, NSW. Purpose is to support redesign/regrading of the driveway to improve vehicle access and prevent vehicle scraping. Survey required for driveway area, garage interface, road interface and surrounding levels only (not necessarily a full boundary survey). Deliverable to include spot levels and contour information suitable for a civil engineer to redesign the driveway profile.

Looking for someone to provide civil engineering support to scan my steep driveway and engineer the grading changes needed so I can drive my car down. I’d need the plans to give to an asphalt or concrete contractor

Assisting landscaper with grouting cobble stones. Hourly rate

supply brackets ,hinges and 2 x gates previous gates were pool fence gates need job done asap

I have put all the walls together but need to get them all put together. It is a 3.0m x 0.78m with double sliding doors. Myself and my son are available to hold walls together while they are connected. Base is all ready to for shed. Would prefer it done as soon as possible.